• Home
  • Archive by category "Iraq"

Cement Samples Testing in Iraq

Enquiry:

We required a testing of cement sample as per below list of  chemical & physical analysis. Kindly send us quotation.

Chemical Analysis
LOI
SiO2
Al2O3
Fe2O3
CaO
MgO
SO3
Na2O
K2O
Cl
LSF
SM
AM
C3S
C2S
C3A
C4AF
Physical Tests
Blaine (cm2/gm)
Residue (45 µ )
Expansion(mm)
Consistency (%)
Setting Time (min)
Initial
Final
Strength (Mpa)
2 Days Strength
7 Days Strength
28 Days Strength


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Didecyl Dimethyl Ammonium Chloride in Iraq

Enquiry:

We would like to request your assistance in conducting a thorough analysis of the chemical substance DIDECYL DIMETHYL AMMONIUM CHLORIDE, which is currently located in the Jurf Al-Nadaf area of Baghdad,IRAQ.

Enclosed with this email, you will find the results of the previous material  conducted by our company, as well as the testing report from the Chinese supplier. In order to proceed with our obligations to the supplier, we kindly ask you to perform the necessary testing on the aforementioned substance and provide us with a detailed report of your findings. This will be indicate the difference in  the specification of subject material especially in PH meter that should be in  the range (6-9) .

This report will be essential for us to send to the Chinese company as per their request. Once we receive your analysis, we will be able to return the material to them accordingly.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Domestic Plastic Tank Water Testing in Iraq

Enquiry:

I have recently heard about your test quality regarding the plastic reservoirs for drinkable water especially (toxicity tests), and i want to know more about you guys, I am a mechanical engineer at the general directorate of investment in garmyian district in Kurdistan region- Iraq which holds more than 30 residential projects. There are a great potential for coorporation and sending sample tests to your center in the future. 


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metallic Parts Testing in Basra, Iraq

Enquiry:

Could you please confirm whether you are able to conduct the chemical analysis of the metallic parts of the New PRODUCED WATER TANK (body, bottom, roof, nozzles)?

The objectives of the analysis are as follows:

Determining the sulfur and phosphorus content to confirm that the carbon steel grade complies with the NACE MR-0175 requirements for materials intended for use in environments containing H₂S.

Performing the analysis using one of the following methods, whichever can be completed more quickly, including the report:

  1. Conducting a detailed chemical analysis with the use of a mobile metal analyzer with argon purging.
  2. Collecting metal shavings from drilled holes made directly on the equipment in areas with identified corrosion damage, followed by laboratory testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Clarification Assessment in Iraq

Enquiry:

Could you please advise if you are able to perform the Water Clarification Assessment as per below requirements?Kindly confirm your ability to perform it by today and advise if you require any further information in order to submit your quotation accordingly.

Objective

Evaluation of the impact of the back-produced ASP fluids on the PWT process, more precisely on the water clarification process. Evaluation of different flocculent/coagulant chemistries.

Deliverables

Results of the jar tests (max.12 max for the screening step and max. 6 for final tests with water quality analysis) and recommendations on the best performing water clarifiers according to the experimental conditions.

Workflow

1. A screening step on one ASP case at a fixed oil content: a maximum of 4 chemicals at 3 different concentrations can be tested. The evaluation will be carried out by observing the precipitation of the polymer and the quality of the water. At the end of this stage, one or two best chemicals will be selected.

2. Based on the screening results, 3 different ASP cases will be evaluated with the best selected candidates. The residual oil content after Jar test will be measured by liquid/liquid extraction with dichloromethane and UV measurement, and the sludge volume will be estimated.

Protocol

  • Water clarifiers screening through Jar tests (adapted ASTM D2035)
    • Introduction of clarifier into 400 ml of produced water at 300 rpm,
    • 300 rpm for 1 minute,
    • 70 rpm for 15 minutes,
    • 20 minutes of static conditions.
    • Temperature: room temperature
    • Efficiency is assessed with visual inspection, turbidity on a sampling and oil content by solvent extraction and UV analysis
  • Sludge volume estimation by filtration

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Instrument Calibration in Iraq

Enquiry:

We have the below devices in our office in Iraq and we want to make calibration for them.

  • Omicron CMC 356.
  • Resistor decade 11 MOHM.
  • Digital multimeter B1125.
  • DC calibrator Siemens B1108E.
  • Pressure Indicator Testo.
  • Phase Sequence Indicator ERB:758.

Can you provide us with a quotation for the calibration and advice if you can send your team to make the calibration in our office or we must bring the devices to your location.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Al Basra Dielectric Oil Testing, Iraq

Enquiry:

We’re an oil and gas services company based in Basra, Iraq, with our back office located in Dubai.

I urgently need your best price for Dielectric Oil Test Equipment with a capacity of up to 100KV. The delivery location is Al Basra, Iraq.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Food Safety Testing in Iraq

Enquiry:

I’m a member of the company that works to provide services for food safety testing Lab\ Iraq. 

We ask about rheology testing for food products such as for wheat analysis. How can you help us with your services? We see for a Laboratory that can provide us a service of receiving our customers products sample and give the results as a report by email. Please, tell me if it’s possible to make this corporate or not and write me your opinion if there is another way to help.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing in Baghdad, Iraq

Enquiry:

We are looking for a quote for accredited drinking water testing samples as per ISO/IEC 17025 standards. Could you please provide your best offer price for the required tests below.

  1. pH
  2. Conductivity
  3. Total Dissolved Solids (TDS)
  4. Total hardness as CaCO3
  5. Dissolved Oxygen (DO)
  6. Turbidity
  7. Calcium as Ca
  8. Magnesium as Mg
  9. Iron
  10. Chloride
  11. Sulphate as SO4
  12. Nitrate as NO3
  13. Fluoride
  14. Sodium
  15. Potassium
  16. Biological Oxygen Demand (BOD)
  17. Nitrogen
  18. Phosphorus

Also, please confirm if your laboratory is accredited and capable of conducting these tests. If yes, kindly share your ISO/IEC 17025 accreditation certificate and scope.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing Contract in Basrah, Iraq

Enquiry:

Please be inform that we are in need to conduct water testing on daily basis for our project requirement.

In line with that please submit your quotation comply with our following concerns.

** Test report shall contain all the parameters mentioned in the attachment.

**How many days needed to submit the test report upon receipt of sample.

**Collecting sample from our office or CP-35 date is included in vendor scope.

**Water bottle sample shall be supply by vendor for collecting sample from our end.

**Please consider daily one or two samples for continuous one month (Estimated number of samples is 50 sample).


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].