• Home
  • Archive by category "Malaysia"

Batteries Waste Testing for Oil and Grease, Malaysia

Enquiry:

Please check are your lab is doing the test for the parameters attached and To detect the oil and grease quantitatively. These parameters is for the Waste Analysis SW102 Waste Lead Acid Batteries & Dry Batteries.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Thermal Analysis of Epoxy Powder in Malaysia

Enquiry:

I would like to inquire if there are any accredited facilities that offer thermal analysis testing for epoxy powder and cured epoxy powder coating films, specifically for Glass Transition Temperature and Heat of Reaction.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ship Fuel Oil Testing in Malaysia

Enquiry:

We are looking for a company or lab that can analyze Fuel Oil samples in Malaysia. If you can do it, please advise us.

Also, we want to send our person to witness the sample analysis. 

So, would it be okay for your lab if our person could be present during the fuel oil sample analysis?

Please send us the charges and advise us of the required time to obtain the report.

Your prompt response will be highly appreciated. 


Note:- 1. If you have any other queries, please don’t hesitate to get in touch with the undersigned through the mail, call, or WhatsApp.
            2. Kindly confirm the safe receipt of this mail.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel, Lube Oil, and Coolant Analysis in Malaysia

Enquiry:

We are seeking quotations for laboratory testing services for Diesel Fuel, Lube Oil, and Coolant samples, as per the specifications outlined in the attached document. The testing will be conducted periodically over the next few years. We prefer the laboratory to be locally available in Malaysia to ensure efficient sample handling and timely results.

SCOPE OF WORK:

1. Lube Oil Analysis

a.  Required Tests: Viscosity at 100°C, Flash Point (COC & PM), Soot Content, Total Base Number (TBN), Water Content, Oxidation, Ethylene Glycol.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

2. Coolant Analysis

a. Required Tests: Sum of Alkaline Metals (as CaCO₃), pH Value, Chloride Ions, Sulfate Ions, Anions Total (Cl, SO4), Bacteria, Yeast (Fungi and Mold), Silicon.

b. Methods: ICP, IC, and other relevant standards as specified.

3. Diesel Fuel Analysis

a. Required Tests: Total Contamination, Density at 15°C, API Gravity, Viscosity at 40°C, Flashpoint, Boiling Curve, Water Content, Carbon Residue, Oxide Ash, Sulfur Content, Cetane Number, Cetane Index, Copper Corrosion, Oxidation Stability, Lubricity, Neutralization Number.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

SAMPLE DETAILS:

1. Frequency: Testing will be conducted every four months.

2. Sample Volume:

a. Diesel Oil: 6 samples x 1 liter each.

b. Coolant: 12 samples x 1 liter each (HT and LT lines).

c. Lube Oil: 6 samples x 1 liter each.

3. Additional Samples: A one-time sample of fresh coolant and lube oil for baseline parameter establishment.

KEY REQUIREMENTS:

a. Results must be provided in the units and measurement scale specified in the attached document.

b. Results must clearly indicate whether the readings fall within the allowed limit values.

c. Confirmation of lead time for receiving results after sample submission.

QUOTATION SUBMISSION:

Please provide your quotation, including:

a. Cost per test or package.

b. Total cost for the initial batch of samples.

c. Lead time for results.

d. Any additional terms or conditions.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Microcystic LR Test in Soft gels, Malaysia

Enquiry:

We are health supplement manufacturer based in Puchong, Malaysia.

Currently we are seeking lab to test Mycrocystin L-R on our raw material powder as well as the finished goods in softgels.

Please advise if your lab is able to conduct the test.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Timken Method Lubricant Testing in Malaysia

Enquiry:

II would like to inquire if your company offers testing services for the standard test method, such as the Timken method, for measuring extreme pressure properties of lubricating fluids. Specifically, we have a sample of engine oil that we are looking to have tested.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].