• Home
  • Archive by category "Jeddah"

Category: Jeddah

Pre export Testing of Marine Oil in Jeddah, KSA

Posted by: Chemist Posted on: April 6, 2026

Enquiry:

We request your urgent support in conducting the required laboratory testing for our marine oil export shipment destined for Egypt. The Ministry of Energy has instructed us to obtain a test report from an authorized and accredited laboratory before export clearance can be issued.

The shipment is ready, and we need the testing to be completed at the earliest to avoid any delay in export processing.

Details of the requirement:

•           Product: Marine Oil (Export Shipment)

•           Purpose: Ministry of Energy pre‑export compliance

•           Required Tests: As per MoE standards for petroleum and lubricant products (ASTM/ISO methods)

Urgency: Immediate sample collection and expedited reporting, PDS are attached for ready reference.

We kindly request your team to arrange sample collection from our facility in Jeddah industrial area, or advise us on the earliest possible time to deliver the sample to your Jeddah branch.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Machine Calibrations in Jeddah, KSA

Posted by: Chemist Posted on: February 8, 2026

Enquiry:

we are currently gathering information regarding Preventive Maintenance (PM) and calibration services, including PM kits and emergency visits for our laboratory instruments.

We kindly request your support in reviewing the below assets and provide your confirming ASAP to provide the service with your own certified technicians.

Note: at this stage, we do not require a quotation, only a confirmation that you are able to provide the service.

Asset NameDescriptionSerial NumberManufacturerModelRequirements  Annual PMPM kit is required 
CHILLER for SKULL MELTING MACHINE OrinoRKE15000A-VW-SPPM & calibration1 Per year–
LC360B LATHE TNN PM & calibration2 Per year1 Per Year 
PRESS MACHINE OSAKA JACKSPD-150VSPM & calibration2 Per year1 Per Year 
PUNCH MACHINE Kamekura SeikiGP-38PM & calibration1 Per year1 Per Year 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water, Surface Fungi Contamination Test in KSA

Posted by: Chemist Posted on: February 8, 2026

Enquiry:

I would like to inquire about your services regarding water testing.

Do you provide analyses for water and surfaces regarding fungi contamination and do you have specific detection processes for the fungus Aspergillus?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Vessel Equipment Engine Oils Testing in Jeddah, KSA

Posted by: Chemist Posted on: November 26, 2025

Enquiry:

i work with a marine engineering company and establishing some facility enquiries for the capabilities of testing marine vessel, oil, coolants, fuel, water, hydraulic oil etc.

We have a client with some engines in poor shape and we have taken 100ml samples from the associated equipment and would like to know the state and condition of the fluids, 

could you please provide your pricing/ quote for testing these depending on what is available, ie test wise.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

VOC Emission Testing in Jeddah, KSA

Posted by: Chemist Posted on: September 25, 2025

Enquiry:

Please find below details of the item required against the subject inquiry and submit your offer within 48 hours.

You are requested to kindly quote with your least bottom price & minimum delivery time for items in respective quantities.

Kindly acknowledge receipt of this inquiry and do let us know if you require any further information by replying all to this mail.

We would like to conduct VOC emission testing for Futura classic ,a two component chemically curing aliphatic acrylic polyurethane . Please find the attached Technical Data Sheet (TDS) for your reference.

We kindly request the following information’s:

  • The procedure to initiate testing.
  • The estimated cost of the test.
  • The expected duration to receive the results.
  • The testing standards you follow.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Micro Contaminants Characterization, KSA

Posted by: Chemist Posted on: August 4, 2025

Enquiry:

I am looking for (accredited) lab facilities around Jubail, Dammam and Jeddah, that could make different kind analysis and water characterization.

I would appreciate to know more about your services and facilities (local, not local or international).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Liquid Shipment, Tanks, Hatches, Draft Survey, KSA

Posted by: Chemist Posted on: July 28, 2025

Enquiry:

I represent a leading provider of advanced Inspection, Non-Destructive Testing (NDT), Mechanical, and Metallurgical services across Saudi Arabia since 2008. We are proud to be certified to ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO/IEC 17020, and have consistently delivered innovative, high-quality solutions to key sectors including Oil & Gas, Petrochemicals, Power, and Heavy Industries.

We are currently seeking a qualified subcontractor to support one of our clients with services related to: Bulk and Liquid Shipments/Tanks/Hatches Inspection/Draft Survey Services

Please find attached the detailed Scope of Work along with the Pricing Format for your reference.

We kindly request your technical and commercial proposal based on the attached scope. Should you need any clarification or have further questions, please do not hesitate to contact me directly.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Annual Contract Food and Water Testing, Jeddah, KSA

Posted by: Chemist Posted on: July 7, 2025

Enquiry:

We are reaching out to request a quotation for microbiological testing services for both food and water samples as part of our routine quality and safety monitoring program. Kindly include the scope of analysis, testing frequency options, sample turnaround time, and applicable rates.

Additionally, please note that we are exploring the possibility of establishing a one-year service contract, subject to approval of your quotation by our management.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Salt Spray Fog Testing in Jeddah, KSA

Posted by: Chemist Posted on: July 6, 2025

Enquiry:

I’m contacting you to request a quotation for the line items listed below

Sl No.Item No.
(Catelogue No / Standard Universal Code) / Service Requirement or based on previous PO if any		Item / Service Description (Detail if Std Code is not available)Need Date
(DD-Mon-YYYY)		Qty RequiredUnit of MeasureSupplier Name / Contact Details / Remarks
3 Salt Spray (Fog) test as per ASTM B117 of step panel (size 10″x3″)25-Jun-2520EAPanels will be prepared and chromated in house by us using Bonderite M-CR 1201 Aero and the sent to lab for Salt Spray Test as per ASTM B117. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].