• Home
  • Archive by category "Riyadh"

Category: Riyadh

Asbestos Testing in Riyadh, KSA

Posted by: Chemist Posted on: August 8, 2026

Enquiry:

We would appreciate it if you could provide a price quote and additional information regarding asbestos analysis for samples taken from old fuel tanks at the airport in the Riyadh region (approximately 45 years old).

Please clarify the following points in your response:

1- Analysis cost: What is the price per sample?

2- Scope of service: Does the price include:

3- Site visit and sample collection by a qualified technician?

4- Laboratory analysis (e.g., PLM or TEM)?

5- Issuance of an official technical report detailing the results?

6- Timeline: What is the turnaround time for issuing the final report after sample collection?

7- Requirements: Are there specific prerequisites or safety protocols that need to be coordinated prior to the site visit?

We appreciate your cooperation and look forward to your reply.

Please accept our highest regards and appreciation.

السلام عليكم ورحمه الله وبركاته 

تحية طيبة 

ارجو تزويدنا بعرض سعر ومعلومات إضافية بشأن إجراء تحليل الأسبستوس (Asbestos Analysis) لعينات مستخرجة من خزانات وقود قديمة في المطار بمنطقة الرياض  (يعود عمرها إلى نحو 45 سنة).

يرجى توضيح النقاط التالية في ردكم:

1- تكلفة التحليل: كم سعر تحليل العينة الواحدة؟

2- نطاق الخدمة: هل السعر يشمل:

3- زيارة الموقع وسحب العينات بواسطة فني مختص؟

4-التحليل المخبري (مثل PLM أو TEM)؟

5- إصدار تقرير فني رسمي بالنتائج؟

6- المدة الزمنية: ما هي المدة المستغرقة لإصدار التقرير النهائي بعد أخذ العينات؟

7- المتطلبات: هل توجد اشتراطات معينة أو إجراءات سلامة محددة يلزم التنسيق بشأنها قبل زيارة الموقع؟

شاكرين لكم حسن تعاونكم، وننتظر ردكم الكريم.

وتقبلوا بقبول فائق الاحترام والتقدير،

Class 1 Medical Devices Testing, Certification in Riyadh, KSA

Posted by: Chemist Posted on: August 7, 2026

Enquiry:

We are currently seeking qualified laboratory service providers to conduct testing for Class I medical devices, including single-use cusco speculums and speculum kits.

The test reports will be used as part of our product initial registration and certification submissions to the Saudi Food and Drug Authority (SFDA).

We kindly request your laboratory to confirm whether it can perform some or all of the following tests at your facility or accreditated subcontractors:

  1. Accelerated Aging Test
  2. Bioburden Test
  3. Seal Strength Test
  4. Seal Integrity / Leak Test
  5. Biocompatibility Testing – Biological Evaluation
  6. Transport Validation Test
  7. Sterility Test
  8. Bacterial Endotoxins Test – LAL Test

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Shelf-life Testing Chilled Ready to Eat Products in Riyadh, KSA

Posted by: Chemist Posted on: August 4, 2026

Enquiry:

We would like to request a quotation for shelf-life testing of our chilled product.

Please provide the following details:

Quotation for the shelf-life testing.

Sample quantity required for testing.

Whether your team can collect the samples from our Kitchen – Riyadh, Laban area.

Earliest available date for sample collection.

Turnaround time for the test report.

Any special requirements for sample handling or transportation.

Product Information:

Goody tuna
Mango Chili Sauce
Jalapeno pickled – diced
Whole kernel Corn
Carrot
Green pepper Batch – diced
Red Pepper Batch – diced
Yellow pepper Batch – diced
Olive Oil
Lemon Batch
Spicy Seasonings Batch
Parsley – Chopped
Lite Mayonnaise

Chilled ready-to-eat product.

Required shelf-life testing period: 4 days (Day 0 and Day 4).

Kindly send us your quotation and requirements at your earliest convenience so that we can proceed with the testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Tank Inspection in Jeddah, Riyadh, Damma, KSA

Posted by: Chemist Posted on: July 13, 2026

Enquiry:

Please find attached the tank information, including the tank diameter and other relevant details, in the attached Word table for your reference.

We kindly request you to review the attached information and submit your quotation for the following required services:

Required Services:

  • Tank Calibration
  • Tank Settlement Survey
  • Tank UT Crawler Inspection
  • VBT (Vacuum Box Testing)

Please include the following in your proposal:

  • Rates for each service
  • Detailed scope of work
  • Estimated execution schedule
  • Any applicable terms and conditions
  • Mobilization/demobilization charges (if applicable for Riyadh, Jeddah, Dammam),

If you require any additional information or clarification, please let us know.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Cooked Food Sampling and Testing in Riyadh, KSA

Posted by: Chemist Posted on: July 12, 2026

Enquiry:

As discussed on the call, I would like to request food sampling/testing for our location in Riyadh. The samples are dal, rice, and curry.

Please share good discounted rates for these food sampling/testing services.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Fuel Analysis in Riyadh, KSA

Posted by: Chemist Posted on: July 6, 2026

Enquiry:

Kindly find the attached RFQ . This request is for our project with the project with Riyadh Metro .

Please send us your best priced quotation . for any questions kindly revert to this email

This is an urgent request , your prompt response in this regards will be highly appreciated.

Water and Sediment for fuel analysis
Pour Point for fuel analysis
Water content for fuel analysis
Thermal Stability for fuel analysis
Trace Metals for fuel analysis
Microbial/ATP test for fuel analysis
Cleanliness/Particle count for  fuel analysis

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gas Detectors Calibration in Riyadh, KSA

Posted by: Chemist Posted on: June 23, 2026

Enquiry:

We would like to invite your company to participate in our tender, please find the below document containing the tender details and requirements.

Project Objective:
Ensure accurate and reliable detection of ammonia gas (NH₃).
Calibrate the sensors and provide calibration certificate for sensors.
Maintain compliance with safety standards and internal HSS requirements.
Verify alarm functionality and signal integrity.
Reduce risk of undetected ammonia leaks.
Support safe and continuous plant operation.

Definitions of Terms:
NH₃ / R717
Ammonia refrigerant
Gas Detector
SCADA / BMS
Fixed ammonia gas detection device
Supervisory Control& Monitoring System
Calibration
OEM
Adjustment and verification using certified test gas
Original Equipment Manufacturer

Contractor Obligations:
The selected vendor shall:
Be qualified and experienced in calibration of fixed NH₃ gas detectors.
Be capable of calibrating multiple OEM detector types.
Use certified and traceable ammonia calibration gases.
Deploy trained and competent technicians.
Coordinate all activities with Client Engineering, Refrigeration, and teams.
Comply fully with Client PTW, LOTO, and safety procedures.
Submit complete calibration documentation and certificates.

    One of our highly proficient and ISO certified laboratory would be taking over this job.

    Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].