Month: April 2026

Copper Pipes Testing in Qatar

Posted by: Chemist Posted on: April 22, 2026

Enquiry:

One of the supplier delivered copper pipes to our ongoing project. Consultant instructed us to do the below testing.

The laboratory must sample the delivered batch and provide a conclusive report on:

*The chemical composition of the internal residue and its potential toxicity.

*The compatibility of this specific internal residue with a 50ppm chlorine disinfection process.

*The lab must have ISO/IEC 17025 Accreditation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metal Detector Validation Certificate in Al Khobar, KSA

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

We are currently looking for a qualified external supplier to carry out validation of our metal detectors and provide an official validation certificate in compliance with applicable standards.

Please let us know if you require any additional information to prepare your proposal.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Silica Sand 75micron Testing in KSA

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

We are manufacturer of Fiber Cement Boards as per ASTM C1186. Kindly share your latest quotation for testing of Silica Sand 75 Micron with the following parameters:

  • Sieve Analysis – % passing 75 micron / 200 mesh
  • Moisture Content – % at 105°C
  • Loss on Ignition (LOI) – %
  • Chemical Analysis 
  • Particle Size

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

CSD Fizzy Sweetened Drinks Testing in Dubai, UAE

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

We need to know for the MoAIT, the following:

  1. what ingredients and parameters you check
  2. What format should the product be sent to the testing lab
  3. what are the requirements. i.e. what packing, artwork flat or mock up , product sealed
  4. how  many litres  for CSD fizzy sweetened drinks

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

HDPU vs PVDF Coating Testing in Doha, Qatar

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

HDPU vs PVDF Coating Testing (AAMA 2605)

Kindly confirm whether your laboratory

  1. Confirmation of your accreditation scope relevant to AAMA 2605
  2. Proposed testing program and methodology for comparative evaluation (PVDF vs. HDPU)
  3. Location of testing laboratory (Qatar or nearest regional facility)

The testing is required for a project in Qatar, and compliance with consultant and project specifications is mandatory.

We would appreciate your prompt response to proceed with the evaluation and approval process.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Wooden Door Paint Testing in Dammam, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

We are reaching out on behalf of our company ( Al Othman Wood Industries Based in KSA – Dammam )  regarding an upcoming project that requires compliance with CDPH Standard Method v1.2 (California Department of Public Health)

We would like to request your support and quotation for conducting VOC emissions testing for wooden doors paints in accordance with the CDPH v1.2 standard.

Kindly provide us with the following details:

  • Quotation for testing services
  • Sample size and preparation requirements
  • Lead time for testing and reporting
  • Any specific documentation required prior to testing

We are keen to proceed at the earliest and would appreciate your guidance on the next steps.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Heavy Fuel Oil HFO Testing in Najran, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

send us offer for calibration of instruments in max 2 days.

Note: please advise how much qty of HFO required for below analysis?

SR. #Item DescriptionRequired QtyRemarks
1Analysis of Heavy Fuel Oil (HFO).—AS PER ATTACHED SOW01 
Testing parameterUnit of measure
Density at 50 degrees centigradegrams per milliliter (g/ml)
Density at 110 degrees centigradegrams per milliliter (g/ml)
Flash pointdegrees Centigrade (oC)
Heating Value (Gross)BTU per pound (BTU/lb)
Heating Value (Net)BTU per pound (BTU/lb)
Total Sulfur Contentpercent by weight (% wt)
Viscosity at 50 degrees centigradeCentistokes (cSt)
Viscosity at 110 degrees centigradeCentistokes (cSt)
Water contentPercent by volume (% vol.)
Wax contentPercent by weight (% wt.)

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Car Engine Oil Testing in Riyadh, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

I have an old sports sedan car and want to send oil sample to lab to check out If copper/lead/bismuth are elevated so I know whether to change the bearings.

i want to know where your location is, what are the costs associated with the above tests and how long would it take. Also how to send you the oil sample if I am based in Riyadh.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].