Month: May 2026

Drinking Water Quality Testing in Riyadh, KSA

Posted by: Chemist Posted on: May 10, 2026

Enquiry:

We would like to conduct a drinking water quality test for our office. Kindly provide your quotation for the water quality analysis covering the parameters listed below:

  1. pH
  2. Total Dissolved Solids (TDS)
  3. Alkalinity
  4. Color
  5. Oduor
  6. Turbidity
  7. Hardness
  8. Chloride
  9. Fluoride
  10. Nitrate
  11. bromate
  12. Lead
  13. Arsenic
  14. Cadmium
  15. Mercury
  16. Iron
  17. Coliform
  18. E. coli
  19. Total Bacteria Count
  20. Trihalomethane

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Molten Zinc Analysis in Jubail, KSA

Posted by: Chemist Posted on: May 10, 2026

Enquiry:

We would like to request your urgent quotation for Molten Zinc Chemical Analysis as per

our approved Purchase Requisition for our Galvanizing Plant Quality Control requirements.

Service Details

  • Service: Molten Zinc Analysis
  • Description: Chemical analysis of molten zinc bath
  • Quantity: 1 Set
  • Frequency: Monthly (May 2026)
  • Department: QC – Galvanizing
  • Client / Facility: Al‑Jubail

Scope of Analysis

Kindly confirm analysis covering (but not limited to):

  • Zn %
  • Al %
  • Fe %
  • Pb %
  • Other trace elements as per galvanizing standards

Kindly Include in Your Quotation

  • Price per analysis (set)
  • Test method / standard followed (ASTM / ISO, etc.)
  • Turnaround time for results : Immediately
  • Validity of quotation
  • Payment terms : As per Agreed Vendor Payment Terms
  • Sample submission requirements
  • Accreditation details (if available)
  • Quotation reference number

⚠️ This RFQ is urgent as it supports ongoing galvanizing quality control activities.
We would appreciate receiving your best quotation and earliest turnaround time at the soonest possible.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Liquid Fertilizers Testing as per SEWA in KSA

Posted by: Chemist Posted on: May 10, 2026

Enquiry:

I’m reaching out because we need to get some laboratory testing done on our liquid fertilizers to meet the current Saudi MEWA requirements.

Could you let me know if your lab can handle the following tests and what the charges would be for each?

1. Trace Elements (TE) & Physicals:
As shown in image Attached, we need a full analysis covering Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Nickel (Ni), and Chromium (CrVI). We also need levels for Selenium (Se), Sodium (Na), Chloride (Cl), and pH.

2. Radioactive Elements:
As per image attached, we require testing for Uranium-238 (U-238), Radium-226 (Ra-226), Potassium-40 (40-K), and Thorium-232 (Th-232).

Please share your price list for these specific parameters and let us know the typical turnaround time for the results. If there are any specific sample volume requirements for liquid fertilizers, just let me know.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

VISCO Elastic Coating Testing in Iraq

Posted by: Chemist Posted on: May 9, 2026

Enquiry:

Further to our discussion, please kindly confirm the possibility and quote us the costs for carrying out below tests on VISCO Elastic Coating as per ISO-21089-3 -2016. We need itemized costs and prices for each so we negotiate with our client and get final approval.

itemTestStandard
1Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 28 days, Temperature: 23 °CISO-21809-3
2Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 28 days, Temperature: 80 °CISO-21809-3
3Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 48 hours , Temperature: 65 °CISO-21809-3
4Indentation Resistance ISO 21809-3 Annx E @ 23°CISO-21809-3
5Peel Adhesion ISO 21809-3, Annex H @ 23°C to steel and plant coatingISO-21809-3
6Indentation Resistance ISO 21809-3 Annx E @ 80°CISO-21809-3
7Peel Adhesion ISO 21809-3, Annex H @ 80°C to steel and plant coatingISO-21809-3

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing in Rotterdam, Europe

Posted by: Chemist Posted on: May 8, 2026

Enquiry:
We would like to request your support for testing a water sample intended for use in mixing refractory castable material for our Project, at Botlek, theemsweg Rotterdam.

The following tests are required for the water sample as per API 936 requirement.

  1. Chloride Content
  2. pH Value

Kindly confirm:

  • Applicable testing standards
  • Sample quantity required
  • Turnaround time for test results
  • Cost and any additional requirements

Once confirmed, we will arrange for submission of the water sample at the earliest.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Air Quality, Noise, Water Testing in Sharjah, UAE

Posted by: Chemist Posted on: May 8, 2026

Enquiry:

Could you please let me know the process and testing cost for minimum the following items to make sure those are in compliance with environmental regulations and safety standards settled by Sharjah Municipality. Consider top priority and contact the undersigned for any further queries / site visit.   

  • Air Quality at our factory premises (may be in and out) 
  • Water Quality (Line Water & Drinking Water) 
  • Noice Level  (In reference to industrial area standard decibel)

The purpose of the testing is to renew the company license & apply ISO. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Tank Inspection in Ras Al Khaimah, UAE

Posted by: Chemist Posted on: May 7, 2026

Enquiry:
Please send us your best quotation for diesel tank inspection at our below-mentioned branches.

Location details are as follows:

Jazeera Location:

Nakheel Location:

For more details you may contact with Mr. ___________. Kindly provide your best price and earliest availability for the inspection.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ballast Water Sampling and Testing in Port Said, Egypt

Posted by: Chemist Posted on: May 7, 2026

Enquiry:

We work with Korea’s shipowner regarding BWTS VGP SAMPLING.

Could you give us a quotation for VGP Sampling(on board testing and Laboratory Analysis) as below conditions? (Incl. travel expenses);
1. Vessel name: ____________
2. Port of collection / Date: Port Said, Egypt / ETA 11-May-2026(LT)
3. BWMS Model / Type: GloEn-Patrol (Maker: PANASIA CO., LTD.) / Filter+UV
4. BWMS Q’ty / Sampling point: One system / one sampling point
5. REMARK: BIOLOGICAL

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Waste Water Testing in Al Malaz Riyadh, KSA

Posted by: Chemist Posted on: May 7, 2026

Enquiry:

We are currently looking for a company that can provide wastewater test analysis services. Kindly share your contact details, including your name, email address, and other relevant information, so we can send our official communication.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].