• Home
  • Author: Chemist

Author: Chemist

GRE Pipe Quality Testing NDT in KSA

Posted by: Chemist Posted on: January 18, 2025

Enquiry:

As per the information on your website, I believe you have the expertise of GRP pipe quality testing, hence the below is the scope of works required for the GRP pipe tests. Please can you fill in the information XX in the table as quick as its possible, as this is very urgent and we are looking for your quality team to be on the Red Sea Global site on 27-Jan-2025, appreciated for your cooperation on this. We do also have a potential of works coming in future on a large scale.

These tests are to be performed on a GRP pipe with diameters of 300 mm, 400 mm and 500 mm on the site. Nearest airport Red Sea International Airport (20 kms from site) and Yanbu Airport (250 Kms from site)

Non-destructive Tests:

·       Ultrasonic Testing (UT): to measure and verify the wall thickness and check for delamination.

·       Infrared Thermography: to detect variations in the thermal profile which may indicate areas of delamination or voids.

·       CCTV and/or Endoscopic Testing: to check the internal condition of the pipe.

Destructive Testing:

·       Hoop tensile testing (HTS)

·       Axial tensile testing (ATS)

·       Pipe Stiffness testing (STIS)

·       Interlaminar shear strength testing (ILSS).

·       Flexural testing

·       Compression testing

·       Thermogravimetric Analysis

 If the above is met by your services, please can you provide your quotation for items listed below no later than ___________ 2025.

ItemDescriptionsUnitRate (SAR)
1Non-destructive Tests (indicative 20 locations):
1.aUltrasonic Testing (UT): to measure and verify the wall thickness and check for delamination.  TestXX
1.bInfrared Thermography: to detect variations in the thermal profile which may indicate areas of delamination or voids.  TestXX
1.cCCTV and/or Endoscopic Testing: to check the internal condition of the pipe.  TestXX
2Destructive Tests (indicative 5 samples locations):
2.aHoop tensile testing (HTS)  TestXX
2.bAxial tensile testing (ATS)TestXX
2.cPipe Stiffness testing (STIS)TestXX
2.dInterlaminar shear strength testing (ILSS)TestXX
2.eFlexural testingTestXX
2.fCompression testingTestXX
2.gThermogravimetric AnalysisTestXX

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chiller and Freezer Calibration in Doha, Qatar

Posted by: Chemist Posted on: January 18, 2025

Enquiry:

I would like to take this opportunity to brief about our company. We are based in Qatar. Our main business is dealing in commercial Kitchen & Laundry equipment. We supply Equipment as per the customer’s need and provide them complete maintenance services along with the supply of spare parts too.

Currently we are looking for kitchen equipment calibration as per below mentioned. Kindly provide the best price for the below items along with lead time.

  • CHILLER – 2Nos.
  • FREEZER – 2NOS.

Looking forward to get your response at soonest.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Residential Water Testing Services in Singapore

Posted by: Chemist Posted on: January 18, 2025

Enquiry:

Wondering if you have water testing services for residential/ houses.

I suspect an issue with the water flowing into my house but the condo management isn’t doing much to help. My family broke out in hives and we think the cause is the water.

Do you do such testing?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel, Lube Oil, and Coolant Analysis in Malaysia

Posted by: Chemist Posted on: January 17, 2025

Enquiry:

We are seeking quotations for laboratory testing services for Diesel Fuel, Lube Oil, and Coolant samples, as per the specifications outlined in the attached document. The testing will be conducted periodically over the next few years. We prefer the laboratory to be locally available in Malaysia to ensure efficient sample handling and timely results.

SCOPE OF WORK:

1. Lube Oil Analysis

a.  Required Tests: Viscosity at 100°C, Flash Point (COC & PM), Soot Content, Total Base Number (TBN), Water Content, Oxidation, Ethylene Glycol.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

2. Coolant Analysis

a. Required Tests: Sum of Alkaline Metals (as CaCO₃), pH Value, Chloride Ions, Sulfate Ions, Anions Total (Cl, SO4), Bacteria, Yeast (Fungi and Mold), Silicon.

b. Methods: ICP, IC, and other relevant standards as specified.

3. Diesel Fuel Analysis

a. Required Tests: Total Contamination, Density at 15°C, API Gravity, Viscosity at 40°C, Flashpoint, Boiling Curve, Water Content, Carbon Residue, Oxide Ash, Sulfur Content, Cetane Number, Cetane Index, Copper Corrosion, Oxidation Stability, Lubricity, Neutralization Number.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

SAMPLE DETAILS:

1. Frequency: Testing will be conducted every four months.

2. Sample Volume:

a. Diesel Oil: 6 samples x 1 liter each.

b. Coolant: 12 samples x 1 liter each (HT and LT lines).

c. Lube Oil: 6 samples x 1 liter each.

3. Additional Samples: A one-time sample of fresh coolant and lube oil for baseline parameter establishment.

KEY REQUIREMENTS:

a. Results must be provided in the units and measurement scale specified in the attached document.

b. Results must clearly indicate whether the readings fall within the allowed limit values.

c. Confirmation of lead time for receiving results after sample submission.

QUOTATION SUBMISSION:

Please provide your quotation, including:

a. Cost per test or package.

b. Total cost for the initial batch of samples.

c. Lead time for results.

d. Any additional terms or conditions.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Perfume Oil Testing in Singapore n Melbourne

Posted by: Chemist Posted on: January 16, 2025

Enquiry:

I’d like to enquire if you are able to test the contents/ ingredients and the amount of each ingredient in perfume oils?

If yes, could you kindly give me details on the test and the rough cost involved?

. I will be sending the samples from Singapore. If possible, could you send me quotes from Singapore as well as Melbourne, Victoria?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Pump Testing as per EN809 in UAE

Posted by: Chemist Posted on: January 16, 2025

Enquiry:

I represent a leading company specializing in advanced engineering solutions. Based in the UAE, we focus on providing innovative services for the oil, gas, and energy industries.

We are currently looking for laboratory in UAE, which able to implement the pump test under EN 809 ( parameters enclosed)

In case of confirmation from your side to implement this test, I will send you more detailed information about our pump.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Mineral Testing in Mae Sot, Thailand

Posted by: Chemist Posted on: January 16, 2025

Enquiry:

I am looking for mineral testing company in Mae Sot Thailand.

my colleagues in Thailand have samples of antimony around, that we wish to test for the % of the elements in this ore samples.

please if you have mineral testing lab, let me know the cost and how many days are needed for the testing results.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].