• Home
  • Author: Chemist

Cementing Chemical Material Testing in UAE

Enquiry:

As discussed, we have received an Expression of Interest from ADNOC Drilling and are in the process of submitting our response through the following three principal manufacturers:

  1. Energy Consulting Services SAS
  2. SILICA HILL MIDDLE EAST L.L.C
  3. Drilling Fluid Technologies (DFT Trading FZE)

ADNOC has requested the following requirements from the chemical lab:

  1. The bidder must have lab testing facilities in Abu Dhabi for all QA/QC tests. The bidder must submit lab testing capabilities, including detailed equipment readiness to perform API cementing lab testing, along with the bid. ADNOC will audit the bidder’s lab facility prior to the award.
  2. The bidder must be capable of conducting all the required lab testing as per the COA. ADNOC representatives will visit and audit the lab to witness the testing.
  3. For green products, the carbon footprint of each individual product must be analyzed and tested by an approved analytical laboratory, with a full analysis report submitted. The bidder must provide a list of approved analytical laboratories.

Please find attached the basic lab test requirements, a list of chemicals, and the mandatory questionnaire for your careful review.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

BWTS Testing at Browsville & Zeebrugge US, EU

Enquiry:

Please note that we currently have a request for ballast water VGP sampling and analysis at the location mentioned below. Could you check your local team’s availability and provide us with a quotation?

Vessel 1: Calling to Brownsville, Texas with ETA (Arrival) ___- ETS (Departure) ___.

Below parameters needs to be tested for 1 unit.

Vessel 2: Calling to Zeebrugge , BELGIUM with ETA (Arrival) _____ .

Below parameters needs to be tested for 1 unit.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Air Quality and Noise Monitoring at Yas Island, UAE

Enquiry:

Kindly quote us for the below.

Location 1:

  1. Noise Monitoring – Spot Monitoring

-Dry Stack Area – while Fork Lift is in operation.

-Workshop Area – while using the cutter and grinding machine

-Electrical Room – LV Room

  1. Air Monitoring

-Security Office – 8hrs

-Reception – 8 hrs

-Dry Stack Office – 8 hrs

-Workshop Area – Spot Monitoring

-LV Room – Spot Monitoring

-Pump Room – Spot Monitoring

-Dry Stack Area – 8 hrs

-Hazardous Chemical Room – Spot Monitoring

Location 2:

Air Monitoring

-Admin Office – 8 hrs

-Marina Office – 8 hrs


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Asbestos Sample Testing in Riyadh, KSA

Enquiry:

I am writing to check the possibility of testing a possible asbestos sample.

It is located in Riyadh, Saudi Arabia. inside of an empty residential building, we also would like to know the time period and the cost of this operation. 


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gear Box Oil Analysis in Riyadh, KSA

Enquir:

Our company in KSA is looking for a local supplier for regular gear box oil analysis to monitor the wear and tear of our Metro Riyadh traction gearboxes.

The volume is approximately 700 oil samples per year.

If your company is providing such a service, I would be happy to receive some detail information about it and a point of contact within your organization.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ethylene Gas Testing in Yanbu, KSA

Enquiry:

Please confirm if you can provide an impurities analysis for an ethylene gas sample, and ensure that the sample is not allowed to be taken outside Saudi Arabia.

Note: The gas Sample for analysis should be collected by the service provider and the pickup location is Yanbu, KSA


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Glass Cullet Dust Sample Testing in Dubai, UAE

Enquiry:

We have received a shipment which includes some glass cullet (broken glass that can be melted again). However, there appears to be some dust on the piece that we would like to analyse further.

To proceed, we need to send a sample to your lab in Dubai to determine the materials and their chemical composition. Could you please provide us with information on the pricing and the estimated time required to complete the analysis urgently.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Minerals Testing in Thailand

Enquiry:

I am looking for mineral testing company in Thailand.

my colleagues in Thailand have samples of antimony around, that we wish to test for the % of the elements in this ore samples.

please if you have mineral testing lab, let me know the cost and how many days are needed for the testing results.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Vessel Steel Plate Testing in UAE, India

Enquiry:

Enquiry:

Kindly advise your best price to carry out composition and standard test of steel plate 05 no from our vessel.

Grade- ABS Grade A

Thickness – Various (8mm to 14 mm).

Type – Plates

Location  –    Main deck – 1 pcs.

  • Transverse bulkhead – 1 pcs.
  • Bottom Plating –  3 pcs.

Note: Service provider should have approval from IRS (Indian Registry of Shipping) Class.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].