Month: August 2021

Water Sampling Bottles in Dubai

Posted by: Chemist Posted on: August 31, 2021

Enquiry:

Please send us your best price for the following item.

1: WATER SAMPLING CONTAINER 500ML PS/PP UNDOSED IR STERILITY – 1,000 EA
2: WATER SAMPLING CONTAINER 1000ML PET/HDPE DOSED WITH SODIUM THIOSULPHATE – 1,000 EA

1: SAMPLING WATER BOTTLE CAPACITY 500 ML FOR MICROBIOLOGY TEST, HIGH DENSITY, STERILIZED, WIDE MOUTH. PLASTIC WITH CAP – 250 BTL

One of our quality lab equipment supply company in UAE would be providing all requested items.

Oil Quality Test for Petroleum Company, Doha

Posted by: Chemist Posted on: August 31, 2021

Enquiry:

Please note that we would like to know if the analysis facility for Oil Quality is available in your laboratory for the below listed parameters, as we need to know the price of each test as under :

  1. Membrane Patch Colorimetry ( MPC Varnish ).
  2. Oil Cleanliness.
  3. Ruler test.

One of our ISO certified and accredited lab in Qatar would be taking over this job.

Different Types of Sludge Testing, Abu Dhabi

Posted by: Chemist Posted on: August 30, 2021

Enquiry:

We wish to request a formal quotation from your Laboratory for the relevant testing of the different types of used and Lubricant oil.

 We would like to know the chemical particles contained and whether is hazardous or reusable etc.

You may also suggest which industry it may suit to use, please let us know the fee and duration for releasing the result also by reply email.

One of our highly competent and ISO certified lab would be performing oil testing and different kinds of sludge analysis

STP MBR Water Testing in Saudi Arabia

Posted by: Chemist Posted on: August 30, 2021

Enquiry:

Water Analysis for STP and MBR in KSA on a three years contract.

3.6 CONTRACTOR shall conduct required analysis for final produced water
from PS-3 MBR, PS-6 MBR, and PS-10 STP. The required analysis and
their frequencies are shown in the below table. CONTRACTOR shall
conduct the analyses in SAUDI approved labs using the
approved method for each analysis as specified in SAES-A-104:

Required Analysis Frequency
(PS-3 & 6
MBR)
Frequency
(PS-10 STP)
Flow rate Daily N/A
pH Weekly Weekly
Total Suspended Solids (TSS) Weekly Weekly
Total Dissolved Solids (TDS) Weekly N/A
Turbidity Weekly Annually
Biological Oxygen Demand (BOD) Weekly Weekly
Chemical Oxygen Demand (COD) Weekly Weekly
Oil & Grease Annually Annually
Phenols Annually Annually
Aluminum (Al) Annually Annually
Ammonia as Nitrogen Annually Annually
Arsenic (As) Annually Annually
Beryllium (Be) Annually Annually
Boron (B) Annually Annually
Cadmium (Cd) Annually Annually
Chlorine (residual) Weekly Annually
Chromium (total) Annually Annually
Cobalt (Co) Annually Annually
Copper (Cu) Annually Annually
Cyanide (total) Annually Annually
Fluorine (F) Annually Annually
Iron (Fe) Annually Annually
Lead (Pb) Annually Annually
Lithium (Li) Annually Annually
Manganese (Mn) Annually Annually
Mercury (Hg) Annually Annually
Molybdenum (Mo) Annually Annually
Nickel (Ni) Annually Annually
Nitrate (as Nitrogen) Monthly Monthly
Selenium (Se) Annually Annually
Vanadium (V) Annually Annually
Zinc (Zn) Annually Annually
Total Chloroform Weekly Weekly
Intestinal Eggs Weekly N/A

One of our Certified and SAC approved lab in KSA would be bidding for this project.

Bulk Quantity Sampling Cylinders Required in Libya

Posted by: Chemist Posted on: August 27, 2021

Enquiry:

Please provide us with technical and commercial offers for the attached/below items ASAP but not later than the 1st of Sep. You are kindly requested to immediately confirm the interest to submit your offer.

DescriptionQuantityUnit PriceTotal Price
1 Cylinder sample304L stainless steel sulfinert treated. Length 10.9″, volume:1000cc, max pressure:1800 psig, Thk: 0.18″, weight: 6.5 lb, Dia:3.50″5  
2 Cylinder sample304L stainless steel sulfinert treated. Length 13.8″,volume:500cc, max pressure:1800 psig, Thk: 0.093″, weight: 2.6 lb, Dia:2.00″20  
3 Sample cylindervalve, 1/4″ male NPT x1/4″ male NPT fitting,3500 psig pressure rating, treated. heigth:1.0″ , weight: 1.0 lb , Length: 1.0″ , material: sulfinert treated.40  
4 Round narrow mouthcrude oil sample bottle1 liter.100  
Shipment fee 
Total 

The proposal should include (Preferred):–

❶Country of origin for each proposed material?

❷All materials must be genuine (originals).

❸Weight and dimensions of the goods?

❹Lead Time?

❺Current location of the materials?

❻ To include the best possible discount to secure this opportunity. The preferred currency is USD, Euro or GBP.

❼Technical Data Sheets, drawings , images of the required materials.

❽ To propose the best alternative (the upgraded part ), in case the required materials are obsolete or not available anymore.

❾All of the materials needed to be delivered to Libya ( if Possible), therefore, please include the shipment fee.

❿To keep our below Reference Number ( Ref) in all of our communications.

ü Apart from this opportunity, to increase your market share in Libyan Market we offer to be your partner/agent .. in case of interest, please confirm.

One of our nearest branch would be arranging and delivering required items

Fuel Testing Contract in Kuwait

Posted by: Chemist Posted on: August 27, 2021

Enquiry:

We hereby invites you to provide a quotation for Fuel Effectiveness, Laboratory Testing for Kuwait in accordance with the below and attached requirements:

  • Appendix A – Statement of Work Requirements
  • Appendix B_ Cover Letter/Instructions to Bidder
  • Appendix C- Our Prime Contract Flow down Clauses

Please Note:

  • Quote shall be provided in United States Dollars

One of our competent lab in Kuwait would be taking over this project.