Month: August 2022

Water Testing from Ship on hold, Sri Lanka

Posted by: Chemist Posted on: August 16, 2022

Enquiry:

We intend to test some water sample collected from ship’s cargo hold. Please advise your capability to test as per relevant Marpol/MEPA requirements.

Sample/Custody detail

  • Sampling and current location: Sri Lanka
  • Source of sample: Collected from ship’s cargo hold
  • Volume of sample: 5 Litre of sample packed in 3 plastic bottles
  • Purpose: For laboratory testing

Testing Requirements

We list our some of the key parameters for this sample as listed below.

  • pH
  • COD
  • Total Suspended Solids
  • Total Residue Chlorine
  • Ammonical Nitrogen

Some additional tests,

  • Phosphate
  • Inorganic materials (including heavy metals such as Pb, Ni etc)
  • Total & dissolve oil/grease
  • Density and specific gravity
  • VOC / GCMS
  • BOD (5 days)

Apart from our proposed tests, any additional test for investigative analysis of contaminants (chemical/inorganics) please advise us.

Query

If you are capable to test these samples, please advise on the followings,

  • Standard test for the proposed tests,
  • Sample volume requirements,
  • Cost
  • TAT
  • Accreditation level of the laboratory

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality Testing in Fujairah

Posted by: Chemist Posted on: August 15, 2022

Enquiry:

We are looking to get an indoor air quality test done for our place in Fujairah.

Can you send me the requirements to do a quotation for this.

If a site visit is required a 7-day negative PCR test is required for access.

Please let me know so I can make the necessary arrangements.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

BWTS D2 Commissioning Sample Test, Egypt

Posted by: Chemist Posted on: August 14, 2022

Enquiry:

Kindly note that we have intention to perform pre-commissioning and commissioning

PureBallast 3.2 system on our Vessel

The commissioning is planned during her call at Damietta, Egypt.

Therefore we would need laboratory testing of the sample as per IMO D2 and USA EPA/VGP regulations.

Please advise about SE availability and all-inclusive price.

Sampling should be performed on—— about August.

Please advise availability.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Wood Sample Testing, MDF Testing, Kuwait

Posted by: Chemist Posted on: August 10, 2022

Enquiry:

We requested need to do the following test on our wood sample in our Kuwait branch.do you have any testing lab facility for the wood if yes please send the quotation?  For other assistance please contact us.

  • Measure the thickness of the front fibers layers to see if they have an equal thickness or not.

We have two types of fronts attached to their data sheets:

  1. MDF base board coated with decorative paper on both sides and lacquered with UV treatment on its front face.
  2. Wood particle base board coated with decorative paper on both sides.

We are requesting these tests and we are facing a bending issue, especially in the MDF material that we are receiving from the supplier although we used to receive the same material from the same supplier with no bending.

So we doubt that the material composition has been changed somehow.

The supplier justifications the following:

After cutting a section from the front they found the below:

The front covering is 0,347 mm thick and the back covering is 0,547 mm. 

This means that there is one kraft paper under the decorative paper on the front side and two kraft papers on the backside. So, this asymmetrical configuration has produced bending over time.

This malfunctioning of the press occurs in a very isolated way affecting one or two boards and it is the reason for those 8 bent pieces.

This explains why you have found 8 bent pieces despite the new packing system.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Petroleum and Chemical Products Testing in KSA

Posted by: Chemist Posted on: August 10, 2022

Enquiry:

This is Senior Analyst from the Saudi Arabia.

We are interested to test samples of petroleum and chemical product at your service sites within the Kingdom of Saudi Arabia.

Therefore, we kindly request you to the share a list of product and test methods that your capable to test and perform.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Certification for Water-proofing Paint, UAE

Posted by: Chemist Posted on: August 10, 2022

Enquiry:

Certification for a sunlight reflective and waterproof coated paint

We need to know, what all certifications you provide for our paint product which reflects sunlight and water proof, these are the main purpose of the coating. We are mainly looking for DCIL approval and international test certificate. What will be the cost of each certifications.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Third Party Inspection in England

Posted by: Chemist Posted on: August 10, 2022

Enquiry:

We have E-scooter as our product, and we want to do third party testing for this product.

Model: Techtron 5000.

This above model we want to do testing.

So, could you please tell me what all details will be required by your side?

The stock is in our office in UK.

One of our highly proficient and ISO/IFIA certified company would be taking over this inspection.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].