• Home
  • 2025
  • December
  • 01

Day: December 1, 2025

Lube Oil Testing in Malaysia

Posted by: Chemist Posted on: December 1, 2025

Enquiry:

We would like to request a quotation for lube oil analysis services. The tests required include:

Mandatory Tests:

  1. Viscosity at 40°C (ASTM D445)
  2. Total Acid Number (ASTM D664)
  3. ISO Particle Count (ISO 4406)
  4. MPC (ASTM D7843)
  5. Moisture (ASTM D6304 / D7546)
  6. Metals (ASTM D5185)
  7. RULER (ASTM D6971)
  8. RPVOT (ASTM D2272)
  9. FT-IR (ASTM E2412)
  10. Flash Point (ASTM D92)

Optional / Additional Tests:

  • Appearance (Clean and Bright)
  • Rust Test – for ST and GT (ASTM D664)
  • Foaming (ASTM D892)
  • Air Release (ASTM D3427)
  • Demulsibility (ASTM D1401)
  • Insolubles (ASTM D2273)

Please provide quotation and sample submission requirements as soon as possible

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Container Loading Inspection in Vietnam, Thailand

Posted by: Chemist Posted on: December 1, 2025

Enquiry:

We are currently preparing our export plan for freeze-dried fruit products, specifically red-fleshed dragon fruit, and would like to request a detailed quotation for the following services in both Vietnam and Thailand:

Service Scope Required:

  • Inspection (Pre-shipment / Generic)
  • Container loading supervision
  • OT charges (after 6 PM; applicable before 8:00 and after 17:00, Monday–Saturday)
  • Travelling fee
  • Hotel fee
  • Cost sampling
  • Seal control at Cat Lai/ BKK Port – supervision
  • Seal control at Cat Lai/ BKK Port – travelling fee

Testing Categories Required:

  • Physical
  • Microbiology
  • Heavy metals (As, Cd, Hg, Pb)
  • Nutrition facts
  • Allergen
  • Pesticides

To help us evaluate and plan effectively, please include in your quotation:

  1. Unit price for each service
  2. Turnaround time
  3. Any surcharge or additional applicable fees
  4. Validity period of the quotation

We would appreciate receiving the quotation at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Performance Validation Testing in Sharjah, UAE

Posted by: Chemist Posted on: December 1, 2025

Enquiry:

we would like to have the performance of our system validated by an ISO 17025 accredited laboratory.

Our goal is to carry out a comprehensive analysis comparing untreated inlet water with treated outlet water. The parameters include microbiological, chemical, and physico-chemical testing in accordance with drinking water regulations and international standards.

I am currently located in Sharjah, UAE, until December 7, 2025, with the system to be tested, and I can arrange for samples to be taken on-site according to your specifications or provide them as needed.

Could you please send us a detailed quotation for such an analysis, including costs, timeframe, and the exact procedure?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Mold Growth Test IEC 60068-2-10 in Sweden, Europe

Posted by: Chemist Posted on: December 1, 2025

Enquiry:

Our team is preparing for a 28-day mold growth test according to IEC 60068-2-10 (Test J) for electronic assemblies used in High Voltage Direct Current (HVDC) converter valve systems.

The test objects include our cell electronics and gate units. These contain a combination of the following material categories:

  • Ceramic materials (capacitors)
  • Metal materials (resistor films, component leads, connectors, PCB copper layers)
  • Plastic / polymer materials (IC packages, connector housings, optical components)
  • Glass fiber reinforced epoxy (FR-4 PCB substrate)
  • Optical components (plastic lenses, metal housings)
  • Other materials (labels, wooden mounting plate)

For our planning, could you please provide the following information:

  1. Capability – Can your laboratory perform IEC 60068-2-10 mold growth tests, and do you hold relevant accreditation?
  2. Quotation – Pricing for the test.
  3. Lead Time – Required preparation time before the test can start.
  4. Availability – The next available test slot.
  5. Lab Details – Laboratory address and contact information preferably in EU/UK.
  6. Product Compatibility – Whether the test can be performed directly on our cell electronics and gate units.
  7. Experience – Previous testing experience with electronic assemblies or power-electronics modules.
  8. Other Standards – In addition to IEC 60068-2-10, do you also offer mold/fungal tests according to GJB 150A.10 or MIL-STD-810?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Lahore, Pakistan

Posted by: Chemist Posted on: December 1, 2025

Enquiry:

please share the quotation for lube oil analysis for below parameters.

1. Acid number

2. Viscosity at 40 degC

3. Viscosity index

5. Water content (ppm)

6. Metal analysis (ppm) (ZN, Cu, Fe, Ca, Si, Al, Pb) 7. Density at 15 degC

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].