Month: February 2026

Produced Water and Crude Oil Testing in Iraq

Posted by: Chemist Posted on: February 27, 2026

Enquiry:
We would like to request dielectric constant testing for produced water and oil samples from our facility.

-Sample: Produced water and crude oil

-Test Required: Dielectric constant values for both phases

-Purpose: For configuring an interface level transmitter

Please let us know if you offer this service, and provide:

-Cost and turnaround time

-Sample volume needed

-Shipping instructions

-Samples can be sent upon confirmation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Firefighting Foam Testing in KSA

Posted by: Chemist Posted on: February 26, 2026

Enquiry:

Kindly provide your quotation for laboratory testing of a firefighting foam sample. The foam is stored outdoors and is considered old/expired; therefore, evaluation is required.

The type of foam is AFFF 3% but it needs to be confirmed from the lab.

Scope of testing:

  • PFAS analysis
  • Acute toxicity & irritation (skin/eye)
  • Environmental toxicity & biodegradability
  • Chemical properties (pH, corrosivity)
  • Foam performance (expansion ratio, 25% drainage time, stability)

Please include in your offer:

  • Price breakdown
  • Required sample quantity
  • Turnaround time
  • Test methods/standards

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

EVA Foam Roll Testing in Dubai, UAE

Posted by: Chemist Posted on: February 25, 2026

Enquiry:

Please advise and give us your best offer from below request:

Product Name: EVA Foam Roll
Application: Underlay for parquet and laminate flooring.

  • Type of EVA Foam: High-density
  • Operating Conditions: Temperature range -20°C to +80°C
  • Environment: Suitable for moist or dry conditions
  • Raw Materials Include: Calcium carbonate, Low-Density Polyethylene (LDPE), Dicumyl
    peroxide 99%, Azodicarbonamide 99%, Stearic acid, and Zinc oxide
    ■ Required Tests:
  1. Water Vapor Transmission (ASTM E96)
  • Purpose: To evaluate the resistance of EVA foam to water vapor transmission.
  • Test Method: ASTM E96 (Desiccant Method) and Water Method.
  • Acceptable Limit: Less than 0.1 perm.
  • Importance: Prevents damage to flooring and mold growth in humid areas.
  1. Critical Radiant Flux (ASTM E648)
  • Purpose: To evaluate the resistance of EVA foam to flame spread and fire.
  • Test Method: ASTM E648.
  • Acceptable Limits:
  • Public spaces (Class I): ≥ 0.45 W/cm²
  • Residential spaces (Class II): ≥ 0.22 W/cm²
  • Importance: Compliance with building fire safety regulations.
  1. Impact Insulation Class (IIC) – ASTM E492
  • Purpose: To evaluate the reduction of impact sound (e.g., footsteps) transmitted to lower
    floors.
  • Test Method: ASTM E492.
  • Acceptable Limit: Minimum 60 dB or higher.
  • Importance: Reduces sound transmission in multi-story buildings.
  1. Formaldehyde Emission (ASTM D6007-14)
  • Purpose: To evaluate the amount of formaldehyde gas emitted from the EVA foam.
  • Test Method: ASTM D6007-14 (Small Scale Environmental Chamber).
  • Acceptable Limit: Less than 0.05 ppm.
  • Importance: Compliance with environmental regulations and indoor air safety.
  1. Volatile Organic Compounds (VOC) – California Section 01350
  • Purpose: To evaluate the emission of harmful chemical gases (VOCs).
  • Test Method: California Section 01350 (Low-VOC Testing).
  • Acceptable Limit: Product must be certified as Low-VOC.
  • Importance: Compliance with indoor air quality standards.
  1. Mold and Mildew Resistance (ASTM G21)
  • Purpose: To evaluate the resistance of EVA foam to mold and mildew growth.
  • Test Method: ASTM G21.
  • Acceptable Limit: No visible signs of mold or mildew growth.
  • Importance: Prevents health issues and damage to flooring in humid areas.
  1. Density (ASTM D792 or ISO 1183)
  • Purpose: To evaluate quality and strength.
  • Test Method: ASTM D792 or ISO 1183.
  • Acceptable Limit: 80–100 kg/m³.
  • Importance: Provides flexibility and sound absorption.
  1. Hardness (Shore A)
  • Purpose: To evaluate the foam’s resistance to surface pressure.
  • Test Method: ASTM D2240 or ISO 7619.
  • Acceptable Limit: Shore A 25–50.
  • Importance: Resistance to surface pressure and deformation.

Hoping for your immediate response to arrange accordingly.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Stack Emission, Water Testing in Rawalpindi, Pakistan

Posted by: Chemist Posted on: February 25, 2026

Enquiry:

Please provide your quotation for the following testing and monitoring requirements:

Test AnalysisParameters
Wastewater water analysis31 parameters as per PEQS
Drinking Water Analysis30 parameters as PEQS
Ash AnalysisUnburnt Carbon
Stack Gaseous Emission monitoringCO2, Nox, SO2, Smoke NO. as per PEQS
Stack Gaseous Emission monitoringCO & O2

Kindly include your commercial proposal, lead time, and any specific requirements from our side to proceed.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Pump Gauges Calibration in Karachi, Pakistan

Posted by: Chemist Posted on: February 25, 2026

Enquiry:

We deal in Automated Syringe pumps & Infusion Pumps, which have specific gauges to be used for yearly calibration of these units.

But these Gauges itself need to be calibrated, for which I need input from your firm.

Attached herewith are the data sheets of these calibration gauges, out of which 02 are just length-based gauges & only one is spring based syringe gauge.

Please share your stance at earliest if your firm can perform this calibration & provide relevant certificate !

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Weathershield Paint Testing in Pakistan

Posted by: Chemist Posted on: February 25, 2026

Enquiry:

I would like to get a local manufacturer of weathersield paint tested for composition and technical details along with it’s potential duredness.

Please confirm the quantity of paint that you require along with the cost?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Environmental Monitoring in Al Ain, UAE

Posted by: Chemist Posted on: February 24, 2026

Enquiry:

We would like to request a quotation for conducting the Indoor Air, Indoor Noise, Lux & Ambient Air Quality Monitoring services at our facility.

Kindly provide your detailed proposal, including scope of work, methodology, timeline, and commercial terms at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gray Water Testing for VGP in Houston, USA

Posted by: Chemist Posted on: February 24, 2026

Enquiry:

Ref our subj. vsl @ Houston on/abt 26-27/Feb, kindly revert with quote/availability in order to proceed with annual subj. analysis.

Attached last service reports, certificates for your perusal. NO BWTS analysis would be necessary.

AGENT DETAILS:

+++++++++++++++++++

_______ Shipping Agencies, Inc.

Commerce Street, Suite

Houston, TX 77002

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].