Month: June 2026

Flush Water Testing in Dubai, UAE

Posted by: Chemist Posted on: June 23, 2026

Enquiry:

We are currently carrying out the chemical cleaning and flushing of a chilled water piping system associated with a Carrier Chiller installation and require third-party laboratory testing of the flushing water sample to verify satisfactory completion of the chemical cleaning process.

The cleaning process was performed using the following chemicals:

• TIG Group 104L – Acidic Cleaning Chemical
• TIG Group 112L – Alkaline Cleaning / Neutralizing Chemical

In this regard, kindly provide your quotation for laboratory testing and analysis of the submitted water sample covering the following parameters:

ParameterAcceptance Criteria
AppearanceClear, Colorless, Odorless
pH7.0 – 8.5
Conductivity< 450 µS/cm
Suspended Solids (TSS)< 5 mg/L
Turbidity< 10 NTU
Total Iron (Fe)< 0.5 mg/L (ppm)
Total Hardness50 – 100 ppm
Chloride (Cl-)Report Value
Sulphate (SO₄²⁻)Report Value
Total Dissolved Solids (TDS)Report Value
Residual Acidity / AlkalinityReport Value
Copper (Cu)Report Value
Biological Activity / Bacteria Count (if available)Report Value

Additionally, we request that the test report include a clear statement indicating that:

  • The sample meets the requirements for satisfactory completion of chemical cleaning and flushing.
  • The system has been adequately neutralized following acidic and alkaline cleaning.

Kindly provide your quotation, sample volume requirements, turnaround time for testing, and any specific sample collection or preservation requirements.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Fuel Testing in Iraq

Posted by: Chemist Posted on: June 23, 2026

Enquiry:

We are contacting your laboratory to inquire about your testing services and to explore the possibility of future cooperation.

Specifically, we are seeking an ISO/IEC 17025 accredited laboratory capable of performing testing on diesel fuel samples.

We would appreciate it if you could kindly confirm whether your laboratory is accredited in accordance with ISO/IEC 17025.

If so, please provide the following information:

  1. A copy of your valid ISO/IEC 17025 accreditation certificate.
  2. Your current scope of accreditation, including accredited test methods and parameters.
  3. Details of the testing services available for diesel fuel, particularly:
    • Flash Point
    • Density
    • Kinematic Viscosity / Dynamic Viscosity
    • Any other petroleum product testing services available.
  4. A quotation or price list for each test.
  5. The required sample quantity for each test.
  6. The expected turnaround time for reporting results.
  7. Information regarding any opportunities for long-term cooperation, subcontracting arrangements, or technical collaboration.
  8. Details of any discounts or special commercial terms available for multiple samples, multiple test requests, long-term agreements, or regular testing volumes.

We are interested in establishing cooperation with reliable ISO/IEC 17025 accredited laboratories for testing services, subcontracting activities, and potential future collaboration.

Kindly provide your best technical and commercial offer, including any available volume-based discounts and relevant information regarding your laboratory capabilities and services.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Bacterial Swab Testing in Jeddah, KSA

Posted by: Chemist Posted on: June 22, 2026

Enquiry:

We would like to inquire whether your laboratory can perform a Bacterial Swab Test for our factory.

Our factory is specialized in manufacturing plastic packaging containers for food factories and medical solution industries, located in 3rd industrial city, Jeddah, Saudi Arabia.

As part of our quality assurance and hygiene monitoring requirements, we are looking to conduct microbiological swab testing within our facility.

Kindly advise if this service is available from your side, and if so, please share your quotation along with any relevant details regarding the testing procedure, requirements, and lead time.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Detergent Foam Performance Testing in Selangor, Malaysia

Posted by: Chemist Posted on: June 22, 2026

Enquiry:

We are manufacturer of specialty detergents for the semiconductor, electronics, and precision cleaning industries. Our facility is located at Berjaya Park, Shah Alam, Selangor, Malaysia.

We are currently looking for a laboratory or testing service provider that offers detergent foaming performance testing. We would appreciate it if you could provide information regarding:

  1. The foaming test methods available for detergent products.
  2. The testing standards or procedures used (e.g., ASTM, ISO, or other recognized methods).
  3. The sample quantity required for testing.
  4. The testing lead time.
  5. The applicable testing charges.

Kindly let us know the testing methodology that would be used to evaluate detergent foaming characteristics.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Purchase of Lab Items in Kuwait

Posted by: Chemist Posted on: June 21, 2026

Enquiry:

Please provide your best price quote for the below items, request to share picture and specification with your quote.

  • 3l Goel reactor = 5
  • 5l Goel reactor = 2
  • Goel Reactor head =3
  • Conical Flask 250 ML =12
  • Dean Stark Trap =3

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Third Party Type Testing of HDPE DWC Pipe in Dubai, UAE

Posted by: Chemist Posted on: June 19, 2026

Enquiry:

We require a quotation for conducting Third-Party Type Testing of HDPE Double Wall Corrugated (DWC) Pipe, Size 40 mm OD / 32 mm ID, in accordance with IEC 61386-24.

Please provide your quotation for the following tests:

  1. Dimensional Verification (OD, ID, Wall Thickness)
  2. Compression Test
  3. Impact Resistance Test
  4. Bending Test at Room Temperature
  5. Bending Test at -5°C
  6. Resistance to Flame Propagation Test
  7. Glow Wire Test (750°C)
  8. IP67 Dust Ingress Test
  9. IP67 Water Ingress Test
  10. Anti-Rodent Test
  11. UV Resistance / UV Protection Test
  12. Raw Material Verification (Density & MFR/MFI)

Kindly provide:

  • Test charges
  • Sample quantity requirement
  • Lead time for testing
  • Accreditation details of the laboratory
  • Format of the Type Test Report

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

FP70, AR AFFF Foam Testing in Karachi, Pakistan

Posted by: Chemist Posted on: June 19, 2026

Enquiry:

FP 70 and AR AFFF Foam Testing

With reference to the subject matter, we intend to share RFQ for Annual Contract for FP 70 & AR AFFF Foam Testing.

In this regard, please find attached scope of work for your review. If you provide the required services, then kindly fill out the attached form so we can onboard you on our SAP ARIBA for bidding purposes,

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Malaysia

Posted by: Chemist Posted on: June 19, 2026

Enquiry:

Please quote your Best Price as per below details by today.

Description
The Provision of Lube Oil Analysis for  Scope of Works:   1.Provide sample bottle with label   2.Provide Shipping courier or logistic for sample collection from ___  3.Test Package TP5TA-Ruler   a) Oil properties: Oil Condition, oxidation, nitration (FTIR) – Viscosity @ 40 #C or 100 #C (ASTM D445) – TAN (Total Acid Number) (ASTM D974)   b) Contamination Oil – Contamination; dirt & dust FTIR % – Moisture & Water by T-H20 Check (ASTM D6304) – Particle Count (Oil Cleanliness) (ISO 4406)   c) Metal Elements – RDE Fine Wear Metals – 18 elements – RFS Course Wear Metals # 11 elements (ASTM D6595)   4. Membrane patch calorimetry (MPC) test for soluble or insoluble to detect varnish in lube oil (ASTM D7843)   5. Additional test – Flash Point   Quantity: 7 pcs
The Provision of Lube Oil Analysis for Scope of Works:   1. Provide sample bottle with label   2. Provide Shipping courier or logistic for sample collection from ____   3. Test Package TP5TA   a) Oil properties: Oil Condition, oxidation, nitration (FTIR) – Viscosity @ 40 #C or 100 #C (ASTM D445) – TAN (Total Acid Number) (ASTM D974)   b) Contamination Oil – Contamination; dirt & dust FTIR % – Moisture & Water by T-H20 Check (ASTM D6304) – Particle Count (Oil Cleanliness) (ISO 4406)   c) Metal Elements – RDE Fine Wear Metals – 18 elements – RFS Course Wear Metals # 11 elements (ASTM D6595)   Quantity: 5 pcs

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].