Enquiry:

We would like to ask if you are analyzing the following parameters with norms and methods, on product crude oil (petroleum category):

Kinematic Viscosity at 40 °C [cSt] – 2≤V≤100 – ISO 3104:1994  

Density at 15 °C [kg/m³] – max 991 – ISO 12185:1996

Sulphur [% mass] – max 0.05 – ISO 8754:03

Total Sediment Existent [% mass] – max 0.05 – ISO 10307-1:09

Water by Distillation [% vol] – max 0.20 – 3733:99

Micro Carbon Residue [% mass] – max 0.30 – ISO 10370:14

Ash [% mass] – max 0.02 – ISO 6245:01

Flash Point [°C] – min 100 – ISO 2719:16

Cooper Corrosion at 50 °C for 3 hrs – max 1b – ASTM D 130:18

Acid Number [mgKOH/g] – max 12.0 – ASTM D 664:17a

Strong Acid Number [mgKOH/g] – 0 – ASTM D 974:14a2

Iodine Number – <140 – ISO 3961:13

Chloride [mg/kg] – <10 – UOP 779:08

Total Mercury [mg/kg] – <0.2 – with reference to AOCS Ca 17-01

Arsenic [mg/kg] – <0.1 – with reference to AOCS Ca 17-01

Silicon (as Si) [mg/kg] – max 10 – with reference to AOCS Ca 17-01

Phosphorus (as P) [mg/kg] – max 80 – with reference to AOCS Ca 17-01

Calcium (as Ca) [mg/kg] – max 50 – with reference to AOCS Ca 17-01

Alkaline Content (Na+K) [mg/kg] – max 30 – with reference to AOCS Ca 17-01

Vanadium (as V) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Chromium (as Cr) [mg/kg] – <1 – with reference to AOCS Ca 17-01

Nickel (as Ni) [mg/kg] – <0.5 – with reference to AOCS Ca 17-01

Lead (as Pb) [mg/kg] – <0.1 – with reference to AOCS Ca 17-01

Cupper (as Cu) [mg/kg] – <0.4 – with reference to AOCS Ca 17-01

Antimony (as Sb) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Selenium (as Se) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Tellurium (as Te) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Thallium (as Tl) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Tin (as Sn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Manganese (as Mn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01

Cadmium (as Cd) [mg/kg] – <0.2 – with reference to AOCS Ca 17-01

We would be waiting for your reply and comments.

Please note that if you are using different methods, it would be acceptable for us.

---

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].