• Home
  • Archive by category "Basra"

Category: Basra

Glass Transition Temp Tg Testing by DSC in Iraq

Posted by: Chemist Posted on: September 7, 2026

Enquiry:

I would like to inquire whether your laboratory provides Glass Transition Temperature (Tg) testing by Differential Scanning Calorimetry (DSC) in accordance with ISO 11357-2 or an equivalent method.

As per our project specification, the Tg test is required to determine the degree of curing of the resin. The specification requires that the measured Tg shall be more than 30°C above the maximum design temperature. Our maximum design temperature is less than 100°C.

Could you please confirm whether your laboratory is capable of performing this test as per the above requirement?

Additionally, kindly provide your technical datasheet for the DSC equipment, including the applicable testing range, sample requirements, and other relevant technical details.

Looking forward to your response.

Note: If your laboratory is not capable of conducting this testing, please let us know if you can recommend or provide the contact details of another laboratory in Iraq, preferably in Basra or elsewhere in Iraq, that is capable of performing the required testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chocolate Testing in Basra, Iraq

Posted by: Chemist Posted on: April 30, 2025

Enquiry:

I have a warehouse in Khor Al Zubair Free Zone and would like to conduct a steel analysis on its structure. 

Please provide me with the deliverables you offer regarding the steel analysis and what are the information required from our side.

We can schedule a call to discuss further.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metallic Parts Testing in Basra, Iraq

Posted by: Chemist Posted on: February 6, 2025

Enquiry:

Could you please confirm whether you are able to conduct the chemical analysis of the metallic parts of the New PRODUCED WATER TANK (body, bottom, roof, nozzles)?

The objectives of the analysis are as follows:

Determining the sulfur and phosphorus content to confirm that the carbon steel grade complies with the NACE MR-0175 requirements for materials intended for use in environments containing H₂S.

Performing the analysis using one of the following methods, whichever can be completed more quickly, including the report:

  1. Conducting a detailed chemical analysis with the use of a mobile metal analyzer with argon purging.
  2. Collecting metal shavings from drilled holes made directly on the equipment in areas with identified corrosion damage, followed by laboratory testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Al Basra Dielectric Oil Testing, Iraq

Posted by: Chemist Posted on: August 13, 2024

Enquiry:

We’re an oil and gas services company based in Basra, Iraq, with our back office located in Dubai.

I urgently need your best price for Dielectric Oil Test Equipment with a capacity of up to 100KV. The delivery location is Al Basra, Iraq.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing Contract in Basrah, Iraq

Posted by: Chemist Posted on: March 19, 2024

Enquiry:

Please be inform that we are in need to conduct water testing on daily basis for our project requirement.

In line with that please submit your quotation comply with our following concerns.

** Test report shall contain all the parameters mentioned in the attachment.

**How many days needed to submit the test report upon receipt of sample.

**Collecting sample from our office or CP-35 date is included in vendor scope.

**Water bottle sample shall be supply by vendor for collecting sample from our end.

**Please consider daily one or two samples for continuous one month (Estimated number of samples is 50 sample).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].