• Home
  • Archive by category "Lube Oil Analysis"

Category: Lube Oil Analysis

Fire Resistant Hydraulic, Turbine, Lube Oil Testing in Salalah, Oman

Posted by: Chemist Posted on: February 4, 2025

Enquiry:

You are invited to participate in the above RFQ subject. Please acknowledge the receipt of this mail and submit your quotation before or on the due date.

Thanks in anticipation of your immediate response.

Timeline is as below:

1RFQ issue date4.02.2025
2Site visitN/A
3Proposal and offer submission date10.02.2025

Remarks :

Please provide two offers one for technical and one for commercial

Turbine Oil Parameters list
S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point (COC) D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Demulsibility, min D-1401
12 Air release D – 3427
13 RPVOT D – 2272
14 Viscosity Index (VI) D – 2270
15 Particle count ISO-4406
16 Membrane Patch Colorimetry (MPC) D – 7843
17 LSV Antioxidant (%) D – 7590
18 Wear metals & Contaminants D – 5185
——————-

Fire Resistance Hydraulic Oil Parameters list

S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Resistivity D-1169
12 Air release D – 3427
13 RPVOT D – 2272
14 Chlorine content ISO 15597
15 Particle count ISO-4406
16 Wear metals & Contaminants D – 5185
17 Density D7042
18 Auto Ignition Temperature E-659
19 Mineral oil content D6971

Notes

  • Any offers or clarification received after the deadline, will NOT be acceptable neither entertained.
  • We at Salalah have the right to split the requirements as needed.
  • Vendor to attach datasheet or catalog of items for evaluation purpose.
  • Vendor to attach represent litter if he is the agent for any manufacture

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel, Lube Oil, and Coolant Analysis in Malaysia

Posted by: Chemist Posted on: January 17, 2025

Enquiry:

We are seeking quotations for laboratory testing services for Diesel Fuel, Lube Oil, and Coolant samples, as per the specifications outlined in the attached document. The testing will be conducted periodically over the next few years. We prefer the laboratory to be locally available in Malaysia to ensure efficient sample handling and timely results.

SCOPE OF WORK:

1. Lube Oil Analysis

a.  Required Tests: Viscosity at 100°C, Flash Point (COC & PM), Soot Content, Total Base Number (TBN), Water Content, Oxidation, Ethylene Glycol.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

2. Coolant Analysis

a. Required Tests: Sum of Alkaline Metals (as CaCO₃), pH Value, Chloride Ions, Sulfate Ions, Anions Total (Cl, SO4), Bacteria, Yeast (Fungi and Mold), Silicon.

b. Methods: ICP, IC, and other relevant standards as specified.

3. Diesel Fuel Analysis

a. Required Tests: Total Contamination, Density at 15°C, API Gravity, Viscosity at 40°C, Flashpoint, Boiling Curve, Water Content, Carbon Residue, Oxide Ash, Sulfur Content, Cetane Number, Cetane Index, Copper Corrosion, Oxidation Stability, Lubricity, Neutralization Number.

b. Methods: ASTM/DIN/ISO standards as specified in the attached document.

SAMPLE DETAILS:

1. Frequency: Testing will be conducted every four months.

2. Sample Volume:

a. Diesel Oil: 6 samples x 1 liter each.

b. Coolant: 12 samples x 1 liter each (HT and LT lines).

c. Lube Oil: 6 samples x 1 liter each.

3. Additional Samples: A one-time sample of fresh coolant and lube oil for baseline parameter establishment.

KEY REQUIREMENTS:

a. Results must be provided in the units and measurement scale specified in the attached document.

b. Results must clearly indicate whether the readings fall within the allowed limit values.

c. Confirmation of lead time for receiving results after sample submission.

QUOTATION SUBMISSION:

Please provide your quotation, including:

a. Cost per test or package.

b. Total cost for the initial batch of samples.

c. Lead time for results.

d. Any additional terms or conditions.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lab Testing Contract for ADNOC Projects, UAE

Posted by: Chemist Posted on: December 11, 2024

Enquiry:

I am reaching out to discuss the possibility of collaboration with your esteemed organization as an ADNOC Certified Lab. We are an oilfield services company based in Abu Dhabi, specializing in well intervention services for ADNOC.

To facilitate our operations, we would need an approval letter from your side to designate you as our official lab for future requirements, including scale analysis, oil sample tests, and other related services requested by ADNOC.

We believe this partnership will ensure the highest standards of service and compliance with ADNOC’s requirements. Please let us know the process or any further information needed to proceed.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Turbine Oil Testing ISO VG46 in Dhahran, KSA

Posted by: Chemist Posted on: November 26, 2024

Enquiry:

We have an ongoing job of Lube oil filtration at Gas plant-Saudi Aramco and need Particle count analysis for the Lube oil sample after flushing. The contract is for 3 years and number of samples will vary from 3 to 4 for each cycle of lubrication/ flushing.

Oil: Turbine Oil ISO VG 46

Minimum test requirements:

  1. Particle count test
  2. Moisture count.
  3. NAS value
  4. Other parameters as applicable.

Kindly submit the proposal at the earliest.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Engine Oil Testing in Jordan

Posted by: Chemist Posted on: November 24, 2024

Enquiry:

I am from Jordan i am working as chemical supervisor in a power plant generated the electricity by diesel engines ,actually we would like to perform lubricant oil test for the some parameters could you please send to us best offer for testing the all parameters in attached file .

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

MAN HFO Engine Oil Testing in Lebanon

Posted by: Chemist Posted on: November 21, 2024

Enquiry:

I am reaching out to you as we have questions regarding oil testing for one of our customers. Our client is installing a power plant at their factory and have purchased two MAN HFO Engines V28/32S. Can you please support on:

  • What is the right test for those HFO engines?
  • Can you send us a quotation regarding the price of the recommended test?
  • What would be the appropriate frequency for necessary oil testing?
    • For info, as per the engine manual, regular oil additions are expected, with an initial fill of approximately 3000 L and a daily top-up of 40 to 60 L.

If you have any insights based on past experience regarding the typical oil lifespan for these engines, that would be very helpful. Our primary goal with oil testing is to monitor the engine’s condition, determine how long the oil will last, and estimate the interval (in hours) after which the client should plan for an oil sump change. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Oil and Gas Testing in Khartoum, Sudan

Posted by: Chemist Posted on: September 8, 2024

Enquiry:

My name is ----, Downstream manager at Petroleum research and studies Sudan.
Regarding the subject, first allow me to introduce my company. 
we are research and studies is located at Khartoum, it is a technical arm of the oil and energy in Sudan that provides technical data helping carry out supervisory role, by performing the service of analyzing petroleum and petroleum products samples, conducting research and studies, and also providing consultancy services. Unfortunately, the outbreak of war in our country, Sudan, resulted in lack of these services.
I am particularly writing to you asking about the possibility of analyzing petroleum products samples-gasoil, gasoline fuel oil, LPG, JetA-1 for the attached packaged tests at your labs and issuing a certificate.  If this service is available, I would greatly appreciate your action to provide us with more information about: 
-Your accreditation. 
-Minimum time for the process from receiving samples until reporting results. 
-Services fees.
-your terms and conditions if any.
----------
One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Testing Trainer, Oil Testing in Sudan

Posted by: Chemist Posted on: August 8, 2024

Enquiry:

I am looking for the quotation for testing sample oils and a technician to train my employees here in the field.

1. Compressor oil

2. Transformer oil

3. Thermal Oil.

For any further clarification you may call me on the below given number. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].