• Home
  • Archive by category "Lube Oil Analysis"

Car Engine Oil Testing in Riyadh, KSA

Enquiry:

I have an old sports sedan car and want to send oil sample to lab to check out If copper/lead/bismuth are elevated so I know whether to change the bearings.

i want to know where your location is, what are the costs associated with the above tests and how long would it take. Also how to send you the oil sample if I am based in Riyadh.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Car Engine Oil Testing in Dubai, UAE

Enquiry:

I’m seeking company who test my engine oil as I would like to know if engine is within normal ware and tare range. I have replaced an oil yesterday and I want to build history for my car every time when I will change it to make sure I don’t have any issues there.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Hydraulic, Lube Oil Testing in Abu Dhabi, UAE

Enquiry:

We require do the lube oil analysis as per attached.

Sample available : at our office, warehouse, store, Musaffah, Abu Dhabi.

This is to have 2 samples analysed for metal wear particles in the Hydraulic oil.

Vessel details : ———-


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Malaysia

Enquiry:

We would like to request a quotation for lube oil analysis services. The tests required include:

Mandatory Tests:

  1. Viscosity at 40°C (ASTM D445)
  2. Total Acid Number (ASTM D664)
  3. ISO Particle Count (ISO 4406)
  4. MPC (ASTM D7843)
  5. Moisture (ASTM D6304 / D7546)
  6. Metals (ASTM D5185)
  7. RULER (ASTM D6971)
  8. RPVOT (ASTM D2272)
  9. FT-IR (ASTM E2412)
  10. Flash Point (ASTM D92)

Optional / Additional Tests:

  • Appearance (Clean and Bright)
  • Rust Test – for ST and GT (ASTM D664)
  • Foaming (ASTM D892)
  • Air Release (ASTM D3427)
  • Demulsibility (ASTM D1401)
  • Insolubles (ASTM D2273)

Please provide quotation and sample submission requirements as soon as possible


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Lahore, Pakistan

Enquiry:

please share the quotation for lube oil analysis for below parameters.

1. Acid number

2. Viscosity at 40 degC

3. Viscosity index

5. Water content (ppm)

6. Metal analysis (ppm) (ZN, Cu, Fe, Ca, Si, Al, Pb) 7. Density at 15 degC


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Vessel Equipment Engine Oils Testing in Jeddah, KSA

Enquiry:

i work with a marine engineering company and establishing some facility enquiries for the capabilities of testing marine vessel, oil, coolants, fuel, water, hydraulic oil etc.

We have a client with some engines in poor shape and we have taken 100ml samples from the associated equipment and would like to know the state and condition of the fluids, 

could you please provide your pricing/ quote for testing these depending on what is available, ie test wise.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Umm Qasr, Iraq

Enquiry:

We would like to request a comprehensive lube oil analysis in accordance with ASTM standards. Kindly provide your official quotation for the following tests:

  • Viscosity Index
  • Total Base Number (TBN)
  • Total Solids
  • Water Content
  • Viscosity @ 40°C & 100°C
  • Wear Metals (Fe, Pb, Cu, Cr, Al, Ni, Ag, Sn, Ti, Cd, V)
  • Contamination (Na, Si)
  • Additives (P, Ca, Mg, Zn, B, Ba, Mo)

For more detailed information regarding the samples and requirements, please refer to the attached file.

Additionally, please confirm the following:

  1. Your testing charges (per sample).
  2. The exact sample quantity required to perform all of the above tests.
  3. The expected turnaround time for test results after sample receipt.

As this information is urgently required for our internal planning, we would greatly appreciate your prompt response.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Al Khobar, KSA

Enquiry:

Herewith we kindly request submission, without any commitment, of your most favorable price and availability for the goods and/or services detailed below. 

Lube Oil Analysis 9 UNITS

If you will offer an alternative item, please send us technical specification and/or sample photo.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].