• Home
  • Archive by category "Enquiries"

Rubber Gasket Testing in Egypt

Enquiry:

We have a sample of a rubber gasket that used usually in a glass handrail that located outdoor (external use) and marine weather (north coast – Egypt).

We need to test this sample to figure out the base material if it is EPDM base, silicone base, PVC base, etc.

Please advise if you’re capable for doing such a test and the most fast timing can be offered as well as the price, noting that the sample is about 100mm length.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing Contract in Doha, Qatar

Enquiry:

Please provide us with your most competitive quotation for the following parameters. Please ensure that your offer includes complete details, such as test method, pricing, terms and conditions, validity period, and any other relevant information, so that we can evaluate it thoroughly.

DescriptionNo of Samples
E. coli 
Total Bacterial Count216
Pseudomonas aeruginosa 
Legionella 
Legionella Pneumophila Serogroup 1216
Legionella Pneumophila Serogroup 2-14 
Magnesium24
Total Coliform60
E. coli
Pseudomonas aeruginosa 
Calcium 
Total Coliform3
Magnesium 
Total Coliform8
Chemical Oxygen Demand8
Biochemical Oxygen Demand 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Umm Qasr, Iraq

Enquiry:

We would like to request a comprehensive lube oil analysis in accordance with ASTM standards. Kindly provide your official quotation for the following tests:

  • Viscosity Index
  • Total Base Number (TBN)
  • Total Solids
  • Water Content
  • Viscosity @ 40°C & 100°C
  • Wear Metals (Fe, Pb, Cu, Cr, Al, Ni, Ag, Sn, Ti, Cd, V)
  • Contamination (Na, Si)
  • Additives (P, Ca, Mg, Zn, B, Ba, Mo)

For more detailed information regarding the samples and requirements, please refer to the attached file.

Additionally, please confirm the following:

  1. Your testing charges (per sample).
  2. The exact sample quantity required to perform all of the above tests.
  3. The expected turnaround time for test results after sample receipt.

As this information is urgently required for our internal planning, we would greatly appreciate your prompt response.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Al Khobar, KSA

Enquiry:

Herewith we kindly request submission, without any commitment, of your most favorable price and availability for the goods and/or services detailed below. 

Lube Oil Analysis 9 UNITS

If you will offer an alternative item, please send us technical specification and/or sample photo.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gypsum Rock and Fire Resistance Test in Kuwait

Enquiry:

Please quote us your best price for following test to the gypsum rock :

  1. Sieve residue curve of the particles is required.
  2. Hardness value. Mohs Hardness will be the unit.
  3. Chemical test parameter, pls follow the below table.
GYPSUM
 blockpanel
CaSO4  
CaSO4·H2O  
MgO 
Chloride 
Particle size
(befor grinfing)
 
Residue: 90μm (ground) 
Humidity 
SO3 

Furthermore, we would like to know if you perform Fire Resistance Test for AAC Blocks.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Insulating Oil Testing in Tabuk, KSA

Enquiry:

please provide your favorable quotation for the TRANSFORMER OIL SAMPLE TEST.

1. Laboratory Testing of Insulating oil for 1 40MVA Auxiliary Transformers, including the attached requirements – 7 Samples.

2. Laboratory Testing of Insulating oil for station service transformer, including the attached requirements – 8 samples. 


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Purchase of Complete Lab Equipment in Kuwait

Enquiry:

We request your quotation for the Purchase of Laboratory equipment that complies with the following quantities and requirements as mentioned below: 

1 Ion Chromatography (IC) System UNIT 1 Description:As per the technical specifications attached in Appendix 1.1 Connections & Wiring Set 1 Description:As per the technical specifications attached in Appendix 1.2 Reservoir tray Unit 1 Description:As per the technical specifications attached in Appendix 1.3 Washing glass bottles Units 2 Description:As per the technical specifications attached in Appendix 1.4 Flow Channel selection Valve Unit 1 Description:As per the technical specifications attached in Appendix 1.5 Vials (for Auto Sampler) Units 100 Description:As per the technical specifications attached in Appendix 1.6 On-site installation Package 1.7 On-site training Package 2 Ultraviolet-Visible (UV-Vis) Spectrophotometer UNIT 1 Description:As per the technical specifications attached in Appendix 2.1 On-site installation Package 2.2 On-site training Package 3 Drop Test Machine UNIT 1 Description:As per the technical specifications attached in Appendix 3.1 On-site installation Package 3.2 On-site training Package 4 Impact Test Machine UNIT 1 Description:As per the technical specifications attached in Appendix 4.1 On-site installation Package 4.2 On-site training Package 5 Inductively Coupled Plasma Mass Spectrometry (ICP-MS) UNIT 1 Description:As per the technical specifications attached in Appendix 5.1 High-Purity Argon Cylinder:-Nominal cylinder water capacity: 40L Purity ≥ 99.999% suitable for ICP-MS use. UNIT 3 5.2 Compatible high-purity pressure regulator (two-stage): Suitable for ≥ 99.999% argon service. UNIT 1 5.3 High-Purity Helium Cylinder:-Nominal cylinder water capacity: 40L-Purity ≥ 99.999% suitable for ICP-MS use. Compatible high-purity pressure regulator (two-stage) suitable for ≥ 99.999% helium service. UNIT 1 5.4 On-site installation Package 5.5 On-site training Package LOT 1 LOT 2 LOT 3 LOT 4 LOT 5 SALMA [email protected] R&E Petroleum Equipments Company Purchase of Laboratory equipment REF# DATE : Attention : Prepared By: Email subject 7892 30/08/2025 6.1 Capillary Column used in Gas Chromatography (GC) system: UNIT 1 Description:As per the technical specifications attached in Appendix 6.2 Certified Internal Standards for GC-MS: •Compatible with existing Gas Chromatography-Mass Spectrometry (GC-MS) system, model Agilent Technologies 6890N. •All internal standards shall be certified reference materials, traceable to internationally recognized sources. •Each standard shall be supplied with a Certificate of Analysis (CoA) stating the concentration or purity, solvent/matrix, lot/batch number, and expiration date. Quantities referred below 6.a) Butyltin (d₉) g 250 6.b) Tributyltin (d₂₇) g 250 6.C) Tetrabutyltin (d₃₆) g 250 6.d) Triphenyltin (d₁₅) g 250 6.3 Reagents for GC-MS: •Compatible with existing Gas Chromatography-Mass Spectrometry (GC-MS) system, model Agilent Technologies 6890N. •All reagents shall be of analytical grade or higher (≥98% purity). •Each reagent shall be supplied with a Certificate of Analysis (CoA) indicating purity, lot/batch number, and expiration date. Quantities referred below 3.a) Sodium tetraethyl borate (NaB(C2H5)4) g 250 3.b) Methyl trichlorotin (CH₃SnCl₃) Liter 1 3.c) Dimethyltin(II) chloride ((CH₃)₂SnCl₂) Liter 1 3.d) Tri-n-butyltin(IV) chloride (C₄H₉SnCl₃) g 250 3.e) Di-n-butyltin(II) chloride ((C₄H₉)₂SnCl₂) g 250 3.f) Tri-n-butylstannane chloride ((C₄H₉)₃SnCl) Liter 1 3.g) Tetra-n-butylstannane ((C₄H₉)₄Sn) Liter 1 3.h) Octyltrichlorotin (C₈H₁₇SnCl₃) Liter 1 3.i) Di-n-octyltin(II) chloride ((C₈H₁₇)₂SnCl₂) Liter 1 3.j) Di-n-propyltin(II) chloride ((C₃H₇)₂SnCl₂) Liter 1 3.k) Diphenyltin(II) chloride ((C₆H₅)₂SnCl₂) Liter 1 3.l) Triphenyltin(IV) chloride ((C₆H₅)₃SnCl) Liter 1 3.m) Tri-n-butyltin(IV) chloride ((C₄H₉)₃SnCl) d₂₇ Liter 1 3.n) Tetra-n-butyltin(IV) ((C₄H₉)₄Sn) d₃₆ Liter 1 3.o) Butyltrichlorotin (C₄H₉SnCl₃) d₉ Liter 1 3.p) Triphenyltin(IV) chloride ((C₆H₅)₃SnCl) d₁₅ Liter 1 3.q) Tetrahydrofuran (C₄H₈O) Liter 1 3.r) Sodium chloride (NaCl) Liter 1 3.s) Dichloromethane (CH₂Cl₂) Liter 1 3.t) Tri-n-butyltin(IV) chloride (C₄H₉SnCl₃) Liter 1 6.4 Supplies for installation and operation of Capillary Column •The following supplies shall be provided for installation and operation of the capillary column and associated components of the Agilent Technologies 6890N GC system with mass spectrometry detector. •All parts must be fully compatible with the Agilent Technologies 6890N GC system and its associated MS detector. Quantities referred below 4.a) O-ring compatible with GC inlet system Units 2 4.b) Inlet Nut (upper assembly) compatible with GC inlet Units 2 4.c) Ferrule for Flame Ionization Detector (FID) connection compatible with capillary column Unit 1 4.d) High-vacuum Pump oil compatible with installed GC-MS vacuum pump Units 2 4.e) Column inlet nut compatible with GC inlet fittings Units 2 4.f) Electron Ionization (EI) Filament compatible with installed Mass Selective Detector (MSD) ion source Units 2 Lot 6: Equipment Parts and Consumables for Gas Chromatography & Mass Spectrometer (GC-MS) System – compatible with Agilent Technologies 6890 N Gas Chromatography (GC) and Associated Mass Spectrometer (MS) 6.5 Computer System and Software:-A compatible PC & monitor (or laptop) as well as a printer shall be included.-The PC shall be pre-installed with all necessary software required for instrument control, data acquisition, processing, analysis and report generation.-Software licenses, drivers and any necessary activation keys must be included. Licenses shall be perpetual (non-expiring) where available. If the supplier only offers subscription-based licensing, a minimum subscription duration of three (3) years is required, with all renewal costs clearly indicated in the proposal. All licenses must include software updates and technical support during the license period.-The system shall be fully operational upon delivery, requiring no additional software installation. Unit 1 6.6 On-site installation Package 6.7 On-site training Package 7.1 High Performance Liquid Chromatography (HPLC) Column: •Compatible with the Waters 2695 High Performance Liquid Chromatography (HPLC) system •Material: Stainless steel •Dimensions: 250 mm length and 4.6 mm internal diameter •Packing material: Spherical silica gel coated with octadecylsilane (C18), with particle size 5 µm Unit 1 Description:As per the technical specifications attached in Appendix 7.2 Ultraviolet (UV) Detector Lamp: •Compatible with Waters 2487 UV Detector Unit 1 7.3 Battery for Ultraviolet (UV) Detector: •Compatible with Waters 2487 UV Detector Unit 1 7.4 Analytical Standards for High Performance Liquid Chromatography (HPLC): •All standards shall be of analytical grade, with a purity of ≥ 99% •Each standard shall be supplied with a Certificate of Analysis (CoA), stating the purity, lot/batch number, and expiration Quantities referred below 4.a) · 2,2-Bis(4-hydroxyphenyl)propane (Bisphenol A) g 250 4.b) · 4,4′-(Methylethylidene)bisphenol g 250 7.5 Computer System and Software: •A compatible PC & monitor (or laptop) as well as a printer shall be included. •The PC shall be pre-installed with all necessary software required for instrument control, data acquisition, processing, analysis and report generation. •Software licenses, drivers and any necessary activation keys must be included. Licenses shall be perpetual (non-expiring) where available. If the supplier only offers subscription-based licensing, a minimum subscription duration of three (3) years is required, with all renewal costs clearly indicated in the proposal. All licenses must include software updates and technical support during the license period. •The system shall be fully operational upon delivery, requiring no additional software installation. Unit 1 7.6 On-site installation Package 7.7 On-site training Package Note: – I NEED THE COST OF TRAINING & INSTALLATION -Currency of Quotation: USD- I NEED THE TOTAL WEIGHT OF ITEMS- I NEED the Country of Origin Lot 7: Equipment Parts and Consumables for High-Performance Liquid Chromatography (HPLC) – compatible with Waters 2695 High Performance Liquid Chromatography (HPLC)


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Testing of Polyethylene Film in Qatar

Enquiry:

I want to test 2 samples of Polyethylene film (130 microns) in both in the Machine and Transverse directions for the following tests:

2a) Tensile strength (MPa) and elongation (%) at break, according to the test method standard ISO 527 1-3.

2b) Tensile strength at Yield (MPa), as per the test method standard ISO 527 1-3.

2c) 2% Secant modulus, following the test method standard ASTM D 882 (Method A).

Do you have facility of above mentioned testing?


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].