Enquiry:
We would like to ask if you are analyzing the following parameters with norms and methods, on product crude oil (petroleum category):
Kinematic Viscosity at 40 °C [cSt] – 2≤V≤100 – ISO 3104:1994
Density at 15 °C [kg/m³] – max 991 – ISO 12185:1996
Sulphur [% mass] – max 0.05 – ISO 8754:03
Total Sediment Existent [% mass] – max 0.05 – ISO 10307-1:09
Water by Distillation [% vol] – max 0.20 – 3733:99
Micro Carbon Residue [% mass] – max 0.30 – ISO 10370:14
Ash [% mass] – max 0.02 – ISO 6245:01
Flash Point [°C] – min 100 – ISO 2719:16
Cooper Corrosion at 50 °C for 3 hrs – max 1b – ASTM D 130:18
Acid Number [mgKOH/g] – max 12.0 – ASTM D 664:17a
Strong Acid Number [mgKOH/g] – 0 – ASTM D 974:14a2
Iodine Number – <140 – ISO 3961:13
Chloride [mg/kg] – <10 – UOP 779:08
Total Mercury [mg/kg] – <0.2 – with reference to AOCS Ca 17-01
Arsenic [mg/kg] – <0.1 – with reference to AOCS Ca 17-01
Silicon (as Si) [mg/kg] – max 10 – with reference to AOCS Ca 17-01
Phosphorus (as P) [mg/kg] – max 80 – with reference to AOCS Ca 17-01
Calcium (as Ca) [mg/kg] – max 50 – with reference to AOCS Ca 17-01
Alkaline Content (Na+K) [mg/kg] – max 30 – with reference to AOCS Ca 17-01
Vanadium (as V) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Chromium (as Cr) [mg/kg] – <1 – with reference to AOCS Ca 17-01
Nickel (as Ni) [mg/kg] – <0.5 – with reference to AOCS Ca 17-01
Lead (as Pb) [mg/kg] – <0.1 – with reference to AOCS Ca 17-01
Cupper (as Cu) [mg/kg] – <0.4 – with reference to AOCS Ca 17-01
Antimony (as Sb) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Selenium (as Se) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Tellurium (as Te) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Thallium (as Tl) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Tin (as Sn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Manganese (as Mn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Cadmium (as Cd) [mg/kg] – <0.2 – with reference to AOCS Ca 17-01
We would be waiting for your reply and comments.
Please note that if you are using different methods, it would be acceptable for us.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].