• Home
  • Archive by category "Aviation Fuels Analysis"

Category: Aviation Fuels Analysis

Jet A1 Soak Testing as per JIG4 at Tanajib, KSA

Posted by: Chemist Posted on: October 14, 2024

Enquiry:

Kindly provide your best price to conduct the soak test on the __ spool as per the attached drawings. The test should be performed using Jet-A1 fuel to verify the laboratory results indicated in JIG.4 and ensure the compatibility of the RTR pipe material for use in jet fuel systems.

Project name: Construction of Tanajib Expansion ____

Project status: Awarded and activities are ongoing

RFQ Brief: JET FUEL TYPE A1, SOAK Test according to JIG4 Requirements.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Oil and Gas Testing in Khartoum, Sudan

Posted by: Chemist Posted on: September 8, 2024

Enquiry:

My name is ----, Downstream manager at Petroleum research and studies Sudan.
Regarding the subject, first allow me to introduce my company. 
we are research and studies is located at Khartoum, it is a technical arm of the oil and energy in Sudan that provides technical data helping carry out supervisory role, by performing the service of analyzing petroleum and petroleum products samples, conducting research and studies, and also providing consultancy services. Unfortunately, the outbreak of war in our country, Sudan, resulted in lack of these services.
I am particularly writing to you asking about the possibility of analyzing petroleum products samples-gasoil, gasoline fuel oil, LPG, JetA-1 for the attached packaged tests at your labs and issuing a certificate.  If this service is available, I would greatly appreciate your action to provide us with more information about: 
-Your accreditation. 
-Minimum time for the process from receiving samples until reporting results. 
-Services fees.
-your terms and conditions if any.
----------
One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Aviation Fuels Testing in Fujairah, UAE

Posted by: Chemist Posted on: July 27, 2024

Enquiry:

We are into the operation of an aviation fuel depot at Fujairah International Airport UAE.

We have a requirement of complete quality tests of JET A-1 as below.

1.Test A (DEF STAN 091-091)

2.Test B

3.Millipore test with cartridge.

4.Microbiological test.

Thank you for your attention to this inquiry. We look forward to your prompt response and hope to establish a mutually beneficial working relationship. For any clarification and further detail requirements please feel free to reach out to the undersigned.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Jet Fuel Analysis Tender in Belize, USA

Posted by: Chemist Posted on: July 27, 2024

Enquiry:

We have a tender for above said equipment.

We are interested to participate in the tender with your equipment.

The requirements are attached.

Therefore, we request you to let us know the possibility. Last date of submission is 7th of August.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Jet Fuel Soak Testing in KSA

Posted by: Chemist Posted on: July 4, 2024

Enquiry:

I would like to request a quotation for the Soak Test, as per the specifications provided below.

1.            Appearance – ASTM D4176

2.            Existent gum – ASTM D381

3.            Water Separation Characteristics (previously known as MSEP) –

ASTM D7224 or D8073 or D3948

4.            Conductivity – ASTM D2624

5.            Saybolt colour – ASTM D156

6.            Thermal stability (JFTOT) – ASTM D3241

7.            Distillation – ASTM D86

8.            Flash point – ASTM D56

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Debris and Filter Analysis, Aviation Oil Test in Cambodia

Posted by: Chemist Posted on: May 29, 2024

Enquiry:

We are looking for new suppliers who can assists us with the following lab analysis services:

  • Oil Analysis
  • Debris and Filter Analysis
  • Fuel Analysis
  • Hydraulic Fluid Analysis

It is important to let you know we operate three type of aircrafts and four different type of engines:

  • Airbus 320 – Engines CFM56-5B & LEAP-1A (Both from CFM a GE company)
  • Airbus 332F – Engine Trent 700 (From Rolls Royce)
  • Boeing 788 – Engine Trent 1000 (From Rolls Royce)

We have strong operation in the USA especially in California, Florida, Washington DC and New York. We are looking for a strategic partner who can assist us in the USA near to any of these locations. We usually require support under AOG basis (Aircraft on Ground) so express service is highly appreciated. I have couple questions for you:

  1. Are you able to perform any/all the analysis?
  2. How can we start stablishing commercial business? Are you able to offer credit terms?
  3. What are your location and nearest airport?
  4. Are you able to offer AOG-24/7 service?
  5. Can you please provide your price list?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Fuel Oil Testing in New York, USA

Posted by: Chemist Posted on: May 23, 2023

Enquiry:

Can we have a laboratory get back to us for #6 Fuel Oil Testing?

Our needs are somewhat specific.

There are many ways to analyze number 6 fuel oil.

Below are the parameters we need to fulfil for our client

Below is our requirements:

Bunker Fuel Adultrant Testing    ISO 8217
SulphurASTM D4294-21 ASTM D4294-21ASTM D5453ISO 8754 XRF
Sulphur    ISO 14596 XRD
API GravityASTM D0287-22 ASTM D2827ASTM D287 
Specific Gravity   ASTM D1298 
Viscosity   ASTM D445 
Viscosity Index   ASTM 2270 
Kinematic Viscosity    ISO 3401
Density Hydrometer   ISO 3675ISO 3675
Density  Oscillating U-Tube   ISO 12185ISO 12185
% Water Karl Fischer   ASTMD6304CISO 12937
Water Content    ISO 3733
Pour Deg FASTM D97-17b (2022) ASTM D5950ASTM D97ISO 3016
% WeightASTM D4870A    
% WeightASTM D4870B    
Ash % WeightASTM D482 ASTM D482ASTN D874ISO 6245
Carbon Residue    ISO 10370
VanadiumIP-501EPA 6010C  IP-501
SodiumIP-501EPA 6010C  IP-501
CalciumIP-501EPA 6010C  IP-501
PhosphorousIP-501EPA 6010C  IP-501
ZincIP-501EPA 6010C  IP-501
AluminumIP-501EPA 6010C  IP-501
SiliconIP-501EPA 6010C  IP-501
LeadIP-501EPA 6010C  No
Nickel    IP-501
Iron    IP-501
FlashpointEPA 1010  ASTM D92 
Flashpoint(Pensky)   ASTM D93ISO 2719
Flashpoint-Rapid Equilibrium    ISO 3679
PAH ContentASTM D5186EPA 8270D   
Fuel FingerprintEPA 8015M    
TCLP Metals1311/6010C/7470A1311/Total EPA 200 series   
PCBsEPA 8082EPA 608.3   
ReactivitySW-846, Sec 7.3    
Paint Filter TestEPA 9095B    
Bottom Water&Sediment   ASTM D2709ISO 10307 – 1&2
Acid Number    ASTN D664-09
pHEPA 9040  ASTMD1287 

When you have a chance can you send us a referred laboratory for the below?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].