Calibration Service Enquiries
Enquiry:
Food and water testing
Need quotation for below
1.Food & water testing both Microbiology & chemical.
2.Hand swab & surface swab.
3.Calibration of kitchen equipment
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Project : Calibration Services Multiple Items
Company : Omani
We have a requirement for the below mentioned items request you to send your quotes complete commercial terms & Conditions on or before ____________
| Sl No. | Item Description | Range&Make | UOM | Qty |
| 1 | Steel Tape | 0-30 Mtr, Stanley | No | 1 |
| 2 | steel tape | 0-100Mtr, Fiscp pacer | No | 1 |
| 3 | Steel Rule | 600mm, Lobster | No | 1 |
| 4 | Vernier Caliper | 0-300 mm, Mitutoyo | No | 1 |
| 5 | Vernier Caliper | 0-150 mm, Mitutoyo | No | 1 |
| 6 | Digital Vernier Caliper | 0-300mm, CD-12″PSX / Mitutoyo | No | 1 |
| 7 | Outside Micrometer | 0-25 mm, Mitutoyo | No | 1 |
| 8 | Outside Micrometer | 25-50 mm, Mitutoyo | No | 1 |
| 9 | Outside Micrometer | 50-75mm, Mitutoyo | No | 1 |
| 10 | Inside Micrometer (Stick) | 60-300 mm, Mitutoyo | No | 1 |
| 11 | Sprit Level | 0-300 mm, Stanley | No | 1 |
| 12 | Sprit Level | 1 Meter, Stanley | No | 1 |
| 13 | Sprit Level | 2 Meter, Stanley | No | 1 |
| 14 | Total station (Thedolite) | Distance Range: 1 prism-3,000m, 3 prisms-4,000m, 9 prisms-5,000m, Topcon / GTS-235NLP | No | 1 |
| 15 | Auto level | Working Range : ±15ft., Topcon / | No | 1 |
| 16 | Master level | 0-20mm/m, INSIZE | No | 1 |
| 17 | Bore gauge | 18-35mm, Mitutoyo | No | 1 |
| 18 | Bore gauge | 0.01mm to 0-3mm, Mitutoyo | No | 1 |
| 19 | Bevel Protector | 0-90mm, Mitutoyo | No | 1 |
| 20 | Hight gauge | 0-18inch, Mitutoyo / HS-18 | No | 1 |
| 21 | Ultrasonic Thickness Gauge | 0.63-500 mm, 204 / Elcometer | No | 1 |
| 22 | Weld Purge Monitor (Oxygen Monitor) | 0 to 20.9% of oxygen concentration, 100 SC / Tag | No | 1 |
| 23 | Dew Point Meter | -20°C to 80°C & 0 to 100% RH, G319 / Elcometer | No | 1 |
| 24 | Dial Thickness Gauge | 0-5 mm, 124 / Elcometer | No | 1 |
| 25 | Coating Thickness Gauge | 0-15000 µm, 456 / Elcometer | No | 1 |
| 26 | Surface Profile Gauge | 0-5 mm, E124-3M Elcometer | No | 1 |
| 27 | Roughness Meter | 0.5mm/s – 2.900 µm, Mitutoyo | No | 1 |
| 28 | Coating thickness gauage | 0-1500 µm, Elcometer | No | 1 |
| 29 | Dew point calculator | 0-50mm, Elcometer 114 | No | 1 |
| 30 | Probe | 3.5 X10, GE | No | 1 |
| 31 | Probe | 70°, GE | No | 1 |
| 32 | UT Probes | 70° -1, 60° -2, 45°-2, 4MHZ DIA10-1 , – | No | 6 |
| 33 | UT V1 -Calibration Block | 60°-80°, EECI | No | 1 |
| 34 | UT V2 -Calibration Block | 40°-60°, EECI | No | 1 |
| 35 | UT Machine | , GE USM 35 | No | 1 |
| 36 | Magnetic Yoke | 0-4.5 Kg, GAMMATEC | No | 1 |
| 37 | Magnetic Yoke | 0-18 Kg, – | No | 1 |
| 38 | Laser Thermometer | 0.25m to 2m, Elcometer /214 | No | 1 |
| 39 | Portable welding electrode oven | 50-150°C, TECHWELD | No | 10 |
| 40 | Baking oven for welding electrode | 500°C, WELDRY 500 | No | 1 |
| 41 | Holding oven for welding electrode | 370°C, WELDRY 370 | No | 1 |
| 42 | Weghing machine 300Kg | 300Kg, | No | 1 |
| 43 | Torque wrenge 600-3000 Nm | 600-3000 Nm, BRITOOL | No | 1 |
| 44 | Torque wrenge 480-940 Nm | 480-940 Nm, BRITOOL | No | 1 |
| 45 | Torque wrenge 12-68 Nm | 12-68 Nm, BRITOOL | No | 1 |
| 46 | Torque wrenge 25-135 Nm | 25-135 NM, BRITOOL | No | 1 |
| 47 | Torque wrenge 65-450 Nm | 65-450 Nm, BRITOOL | No | 1 |
| 48 | Stantard Type Digital indicator | 0 to 01mm, Mitutoyo | No | 1 |
| 49 | Welding gauge | 0-20mm, INSIZE | No | 1 |
| 50 | HI LO gauge | 0-25mm, INSIZE | No | 1 |
| 51 | Taper gauge | 0 to 15mm, SRWET | No | 1 |
| 52 | Hygrometer thermo clock | , Terminator | No | 1 |
| 53 | Pressure gauge | 0-21 bar, VIKA | No | 1 |
| 54 | Pressure gauge | 0-25 bar, VIKA | No | 1 |
| 55 | Ac / Dc clamp meter | , Kew Snap 2003A / Kyoritsu | No | 1 |
| 56 | Insulation continuity tester | , 3005A / Kyoritsu | No | 1 |
| 57 | High voltage Insulation tester | , 3125 / Kyoritsu | No | 1 |
| 58 | Digital earth tester | , 4105A / Kyoritsu | No | 1 |
| 59 | Precesion right angle | 12″, Moore wright | No | 1 |
| 60 | Precesion right angle | 12″, Moore wright | No | 1 |
| 61 | Right angle | 24″, Stanley | No | 1 |
| 62 | FEELER GAUGE | 0.05-1MM, Mitutoyo | No | 1 |
| 63 | C-CLAMP | No | 4 |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are looking for a lab that can calibrate mass flow meters (lab shall be ISO certified (ISO 17025))
Please find enclosed datasheet showing range of the mass flow meter.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please quote for the below.
THIRD PARTY INSPECTION AND CERTIFICATION CHARGES-FOR VEHICLE
SPARK ARRESTOR INSPECTION AND
CERTIFICATION CHARGES-FOR VEHICLE
EQUIPMENTS: Diesel bowser No # _______
THIRD PARTY INSPECTION AND CERTIFICATION CHARGES-FOR VEHICLE
HYDRO STATIC TEST INSPECTION AND
CERTIFICATION CHARGES-FOR VEHICLE
EQUIPMENTS: Diesel bowser No # _______
THIRD PARTY INSPECTION AND CERTIFICATION CHARGES-FOR VEHICLE
ELECTRICAL CONTINUTY TEST INSPECTION AND
CERTIFICATION CHARGES-FOR VEHICLE
EQUIPMENTS: Diesel bowser No # _______
THIRD PARTY INSPECTION AND CERTIFICATION CHARGES-FOR VEHICLE
DIPSTICK CALIBRATION CHART INSPECTION AND
CERTIFICATION CHARGES-FOR VEHICLE
EQUIPMENTS:: Diesel bowser No # _______
THIRD PARTY INSPECTION AND CERTIFICATION CHARGES-FOR VEHICLE
CIVIL DEFENCE INSPECTION FOR TANKERS AND
CERTIFICATION CHARGES-FOR VEHICLE
EQUIPMENTS: Diesel bowser No # _______
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are leading Plastic products manufacturing Company operating in Dammam and we are looking for supplier to do calibration for our CMM machine model C 10.7.7 in our plant.
Do you have capability to perform this calibration?
If yes, then contact us with your best prices.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We have an urgent request to calibrate below items, would you be able to let us know your capability and to quote us as soon as possible?
| ASSB number | Sub Name | TOOLS /EQUIPMENT | MANUFACTURER | MODEL/TYPE | SERIAL NO | RANGE | RESOLUTION |
| SCHMETZ | High Vacuum Transducer | Edwards | |||||
| SYSTERM | High Vacuum Transducer | IONIVAC |
| ASSB number | Sub Name | TOOLS /EQUIPMENT | MANUFACTURER | MODEL/TYPE | SERIAL NO | RANGE | RESOLUTION |
| Wheelabrator | Flowmeter | Wheelabrator |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are Jordan Company, respectfully ask you to submit a quotation for attached devices calibration considering the following in your final report:
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Enquiry:
With reference to the above subject, we request you to quote for the Calibration of Storage Diesel Tank at the earliest.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are a small factory for ice cream cone & biscuit in Jeddah, Saudi Arabia.
We would like to have your service of weighing scales calibration for the following scales:
range is 40 g – 15 kg
division 2 g
range is 200 g – 150 kg
division 10 g
We would like to discuss the details of the service and quotation with your sales representative.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Kindly quote for the Oil Process Tank Calibration and revert by ASAP.
Calibration can be scheduled to do on Monday of any calendar week.
Please propose your site visit appointment if found necessity.
Please be reminded MUST indicate our BQ Ref. No. in your quotation.
Is oil process tank. 100% raw materials.
RBD Palm Olien. No mixing process in the tank.
| NO | Tank No. | Tank Design Capacity | 1st Time Calibration by 3rd Party | Expected Calibration Date |
| 1 | RBD Palm Olein Calibration Tank | ~1.5 MT | YES | Can be scheduled to do on Monday of any calendar week |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].