• Home
  • Archive by category "Diesel Analysis"

Diesel Fuel Testing for import Purpose, Kuwait

Enquiry:

The manufacturer requests us a diesel fuel sample test, they are likely seeking to evaluate the quality, composition, and performance characteristics of the diesel fuel being used. This testing can help ensure that the fuel meets the required specifications and standards set by the manufacturer for optimal performance and efficiency in their engines. The manufacturer is interested in tests such as cetane number, sulfur content, density, cloud point, pour point, flash point, and other relevant parameters to assess the fuel’s suitability for their engines. Conducting these tests can help maintain engine efficiency, reduce emissions, and prolong engine life.

I would like to know that your company provide such services for the local distributors in Kuwait sector.

If yes, please see the below requirements and provide me the quote for the same.

2.9.1. Diesel fuel analysis – Comparison with EN 590Volume (ml)TAT (days)
Kinematic viscosity at 40 °C70010
Density at 15°C      
Water content by coulometric titration (KF)
Flash point Pensky-Martens closed cup
Total contamination (membrane)
Distillation characteristics at atmospheric pressure
CFPP
Carbon residue (remaining 10% from distillation)
Sulphur content
Cetane index
Ash
FAME
Copper strip test

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Fuel Testing in Riyadh, KSA

Enquiry:

Please provide a quote for testing of diesel fuel for following parameters:

  • Distillation (ASTM D86)
  • Density at 20°C (ASTM D7042)
  • Viscosity at 40°C (ASTM D7042)
  • Flashpoint (ASTM D93)
  • Total contamination (IP440)
  • Water content (ASTM D6304)
  • Sulphur content (ASTM D4294)
  • Cetane index (ASTM D976)

We will have regular samples on weekly basis for testing. Confirm quantity of diesel required for above test and sampling procedure, if any, along with your quote.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Quality Analysis in Umluj, KSA

Enquiry:

Would you please provide me a quotation to check the attached parameters in diesel.

The sample should be collected from Red Sea Project or please provide us the details of your nearby lab to Umluj where I can deliver the sample.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Fuel Testing at Fujairah and Hamriyah Port

Enquiry:

We are looking for testing for diesel fuel in Fujairah port and Hamriya port .

Qnty = 14000MT ( 10 ppm ) as per attached spec.

Please advise us your very best and lowest offer for the same .

Awaiting you reply in anticipation .


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Drilling Oil, Gas, Water, Coolant Testing in Houston, TX

Enquiry:

I would appreciate it if you can answer my following questions:

As one of the most elite Drilling companies in the world and oil & gas companies, our maintenance routine has to align with our international maintenance standards program, which requires following an OIL ANALYSIS system requirement.

Currently we are working on a new big project for oil and gas company, due to our intensive maintenance program, we are required to have constant equipment monitoring system, which help us a lot to expect equipment failure and lower our down time / unproductive time.

our oil analysis requirements are for different types of Oil / Fluid Analysis (e.g. Hydraulic 32, 46, 68 – Transmission 160, 220 – Engine 15W40, Diesel Fuel, Radiator Coolant, Water…. etc.) so your service is highly required to proceed forward with our program, so upon all what had been mentioned above.

Kindly, reply accordingly to the following questions:

  1. Do you have an oil analysis system that we can use?
  2. If so, how can we start using your services immediately?
  3. If we got an agreement for your services, would we be responsible for delivering the samples for you, or you will collect it?
  4. Are you going to provide us the oil sample bottles and labels to be filled?  or we will have to provide all?
  5. If we have to provide it, do you recommend a specific brand, or color (e.g. Black to protect the sample from direct light)?
  6. How long would you recommend for oil sample from the time the sample is drawn to the time of delivery to your labs / facility?
  7. How long does it take to receive the oil analysis report from the time we deliver the sample?
  8. How much would it cost for your oil analysis service? is it per one oil analysis samples or it is per month or flat rate ?
  9. If we bought also the oil drums from your company, would we have a discount or free oil analysis? if so, please let us know the full details with some examples?
  10. Are your labs accrediting from any oil analysis organization / Quality organization bodies?
  11. Do you have a portable oil analysis machine (small oil lab analysis benchmark ) that we can purchase it and keep it permanently in our location?
  12. If so, how much would it cost to purchase it? And what is the Manufacture/ brand and the model? How long it will take to deliver it? How long it will to train one of our employees on it? is user friendly?
  13. Do you have a constant monitoring oil analysis device that can continuously monitor the oil condition? If so, what is the cost of it? And what is the Manufacture / brand, model?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Testing in Mozambique, Africa

Enquiry:

May you please send me a quotation and advise on the lead time.

1lt Diesel Sample Analysis for the below parameters:

DENSITY @ 15ºC (ASTM D4052-11)

-CETANE INDEX(ASTM D613)

-FLASH POINT (ASTM D56)

-COLD FILTER PLUG POINT-CFPP (ASTM D6371)

-KINEMATIC VISCOSITY @40ºC (ASTM D445-12)

-WATER CONTENT (ASTM D95)

-COLOUR (ASTM 1500-12)


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].