• Home
  • Archive by category "Environmental Testing"

Category: Environmental Testing

Effluent Seawater, Boiler Stack Gas Analysis Contract in Kuwait

Posted by: Chemist Posted on: October 25, 2026

Enquiry:

Please send me a quotation for the services listed in the table below. 

SrItem #DescriptionQTYUoM
1—Monthly third-party analysis of main effluent seawater, with a total of 12 samples collected annually.12Nos
2—Monthly boiler stack gas analysis conducted by a third-party laboratory for three boilers, totaling 36 analyses per year.36Nos

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Generator Set Emission Testing in Singapore

Posted by: Chemist Posted on: October 20, 2026

Enquiry:

Please quote us for: Generator Smoke Emission Testing

  1. Generator set emission testing – 1 units

Parameters:

  • Particulates
  • Oxides of Nitrogen
  • Carbon Monoxide
  • Sulphur Dioxide
  • Smoke

Location: Kaki Bukit View

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ceiling Tiles Asbestos Testing in Riyadh, KSA

Posted by: Chemist Posted on: October 14, 2026

Enquiry:

We would like to get a sample of our building´s ceiling tiles tested for asbestos.


Please send an info about how to send a sample and quote for the testing.

The lab- testing should show the amount of Asbestos, not just presence yes/no.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

DCD Certification of Fuel Tank, Emission Testing, Dubai, UAE

Posted by: Chemist Posted on: October 12, 2026

Enquiry:

Please share your quotation for the following:

  • DCD Certification for 50 kVA Generator Fuel Tank – Qty: 1 No.
  • Generator Emission Certificate – Qty: 1 No.

Location: Dubai

We will arrange the passes. Kindly provide employee visa details, Trade License, and vehicle documents required for pass processing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

VOC Emission Test for Parquet

Posted by: Chemist Posted on: October 6, 2026

Enquiry:

We would like to make the VOC tests for our engineered wood florring. We did it in Germany for Oil and now we would like to make it for lacquered product but it takes there more than 3 months.

Could you please provide you offer, samples request and timeling from receiving of samples?  

Emission test according to DIN EN 16516 / AgBB-Scheme 2024

“Engineered parquet floorings”, 2-layer (4 mm oak top layer; Substrate layer: birch plywood) Surface treatments: UV-lacquered,

Total thicknesses: 13mm –  15,5 mm -19,5 mm (3 options but we sent only max size 19.5).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality Testing at Beirut, Lebanon

Posted by: Chemist Posted on: October 2, 2026

Enquiry:

We are based at Beirut Digital District (BDD) and would like to request a quotation for an indoor air quality assessment at our office premises.

We have concerns regarding the quality of the air within the office and would like to evaluate whether the HVAC/air conditioning system, particularly the AC fans and air circulation, may be affecting the indoor environment. We would appreciate your recommendation on the appropriate testing and inspections required, as well as a professional report outlining the findings and any recommendations.

Could you please confirm whether you can provide this service and send us a quotation detailing the proposed scope of work, methodology, deliverables, and any site requirements?

Given the urgency of this matter, we would appreciate receiving your quotation by Tuesday, 6 October 2026.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Asbestos, Mold, and Indoor Air Quality Testing in Jeddah, KSA

Posted by: Chemist Posted on: October 1, 2026

Enquiry:

We are writing to request a formal price quotation for laboratory analysis and sampling services for Asbestos and Mold / Indoor Air Quality (IAQ) for our upcoming project in [Project Location / City].

We would appreciate it if you could provide us with itemized pricing for the following two sampling options:

1. Sampling Option Pricing Breakdown:

  • Option A (On-Site Sampling by Laboratory Technicians): Total cost for sending certified technicians from your team to perform on-site sampling (bulk materials and air cassettes) following standard QA/QC protocols and safety regulations.
  • Option B (Laboratory Testing Only / Client-Delivered Samples): Total cost for laboratory testing and analysis when samples are collected by our team and delivered directly to your laboratory along with a completed Chain of Custody (COC) form.

2. Required Analytical Tests & Methods:

Please provide unit prices for the following specific analyses:

  • Asbestos Testing:
    • Bulk Material Samples: Identification via Polarized Light Microscopy (PLM) (please also indicate TEM pricing if required for confirmation).
    • Air Samples: Airborne fiber concentration analysis via Phase Contrast Microscopy (PCM).
  • Mold & Indoor Air Quality (IAQ) Testing:
    • Airborne Mold Spore Traps: Total spore count and genus identification.
    • Surface / Bulk Samples: Tape lift, swab, or bulk analysis for mold identification.

3. Additional Required Information:

  1. Turnaround Time (TAT): Standard report delivery timeframe and rush/expedited surcharges (e.g., 24-hour / 48-hour TAT).
  2. Accreditation: Confirmation of ISO/IEC 17025 accreditation (and/or National Center for Environmental Compliance – NCEC approval in KSA) for the requested testing methods.
  3. Sampling Supplies: Confirmation whether sampling cassettes, media, and Chain of Custody forms are provided free of charge for Option B.

Please send your formal quotation at your earliest convenience. Feel free to reach out if you require any additional project details to prepare your offer.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ambient Air Quality Testing for Industrial Workshop in Oman

Posted by: Chemist Posted on: September 23, 2026

Enquiry:

I am reaching out on behalf of our factory, a fabrication workshop located in Misfah Industrial Estate, Muscat.

We are looking to conduct Ambient Air Quality Testing at our facility. The approximate dimension of our workshop is 13 metres (W) × 40 metres (L).

Kindly confirm whether you provide this type of testing service and, if so, please provide us with your Quotation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Building Flat Air Quality Testing in Qatar

Posted by: Chemist Posted on: September 21, 2026

Enquiry:

We would like to invite you to submit your best competitive techno-commercial offer for the below requirement:

Location/ Property: Flat – Floresta Garden, The Pearl Qatar

Scope of Work: Air sampling test for Tower Flat .

Please find attached files for your reference and visit the site for more information/ exact measurement.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Flue Gas Testing and Generator Emission Monitoring in Sri Lanka

Posted by: Chemist Posted on: September 7, 2026

Enquiry:

Could you please provide a formal quotation for Stack Emissions and Flue Gas Monitoring at our facility?

Emission Sources:

  – Boilers: 3 units
  – Generator: 1 unit

Required Testing Parameters:

  – O2, CO2, CO, SO2, NO, NO2, NOx, PM
  – Flue Gas Temperature, Excess Air, Combustion Efficiency

The final testing reports are required for CEA/EPL compliance and international audits. Please ensure that standard limit comparisons are included in the report and that all transport costs are factored into the quotation.

For reference, our facility location is:

Due to our audit schedule, the testing must be conducted and the final certified report issued on or before September 17, 2026. Please send your quotation and estimated turnaround time at your earliest convenience.

If you require any additional technical details, please let me know.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].