• Home
  • Archive by category "Air Quality Test"

Category: Air Quality Test

Environment, Atmospheric Gases Testing in Sudan

Posted by: Chemist Posted on: March 24, 2023

Enquiry:

We are working in oil and gas field supply and services.

We are kindly requesting for Environmental lab testing (wastewater, soils, and atmospheric gases) business opportunity with you for one of our clients in Sudan.

 Please find the SCOPE OF WORK in attachment and revert to us if you are interested and willing to provide your services and prices regarding this TENDER. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Air Quality Testing in Ajman, UAE

Posted by: Chemist Posted on: February 1, 2023

Enquiry:

We have new Air Quality Requirements and would appreciate your support to provide quotation for the analysis of Formaldehyde in air with the below details:

• Parameters: Temperature, O2, CO, CO2, O3, PM2.5, PM10, VOC, Formaldehyde.
• Number of points : 3 samples (2 samples indoor and 1 ambient)
• Location : Factory inside FZE , Ajman Freezone (2 samples indoor and 1 ambient)
• Duration of testing: 8 Hours
• All samples shall be done at the same time

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality Monitoring in Abu Dhabi

Posted by: Chemist Posted on: December 6, 2022

Enquiry:

I would like to inquire how much it would cost for MicroBiological Analysis of Indoor Air –  Total Bacteria Count, Total Mould Count. For one location – one sample?

We are based in Abu Dhabi.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Environmental Testing in Malta, Europe

Posted by: Chemist Posted on: October 12, 2022

Enquiry:

We often have jobs requiring monitoring of land, waste, groundwater and air, where we take the samples and send them to an ISO 17025-certified lab for analysis.  A list of a typical analytical suit is detailed on the below tables:

Bulk testing:

AnalyteAnalytical methodologyReference standardLimit of detectionTest-specific accreditation
Total petroleum hydrocarbons: C10-C40GC-FIDIn-house method0.1 – 10 mg/kgYes (soil)
Total Organic CarbonTitrationIn-house method based on BS 1377<0.1%Yes (Soil)
BTEXGC-MS (Headspace)In-house method based on EPA Method 8260, Revision B<1 μg/kgYes (Soil)
PAHsGC-MSIn-house method based on EPA Method 8270, Revision C0.01 ug/kgYes (Soil)
PCBsGC-MSIn-house method based on EPA Method 8082;
EPA Method 1668		7 μg/kgYes (Soil)
MetalsICP-OESIn-house method based on BS 1377All <1 mg/kg    Yes (Soil)
TBTGC-MSIn-house method0.01 mg/kgNo
AsbestosPolarised light microscopyHSG248Presence / absence; if asbestos is detected the quantification test has a LoD of 0.001%Yes
MoistureGravimetryn/a0.1%No

Waste characterisation testing

AnalyteAnalytical methodologyReference standardLimit of detectionTest-specific accreditation
Acid neutralising capacity
(pH 4, pH 7)		TitrationEA NEN 7371:2004(+/-) mol/kgNo
Loss on ignitionGravimetryIn-house method based on BS 1377:19900.01%No
pHProbeBS 1377–No

Leachability testing

AnalyteAnalytical methodologyReference standardLimit of detectionTest-specific accreditation
As (dissolved)ICP-OES (Filtered)In-house method based on BS 1377<1.0 µg/kgYes
Ba (dissolved)<0.05 µg/kg
Cd (dissolved)<0.1 µg/kg
Cr (dissolved)<0.4 µg/kg
Cu (dissolved)<0.3 µg/kg
Hg (dissolved)<0.5 µg/kg
Mo (dissolved)<0.4 µg/kg
Ni (dissolved)<0.3 µg/kg
Pb (dissolved)<1 µg/kg
Sb (dissolved)<1.7 µg/kg
Se (dissolved)<4 µg/kg
Zn (dissolved)<0.4 µg/kg
Total dissolved solidsGravimetryIn house method based on PN-EN 27888:19994 mg/LYes
Phenols (total-mono)ColorimetryIn house method10 µg/LYes
Dissolved organic carbonTOC Analysern/a0.1 mg/LNo
ChlorideDiscrete analyserIn house method0.15 mg/LYes
FluorideDiscrete analyserIn house method0.05 mg/LYes
SulphateDiscrete analyserIn-house method0.03 mg/LYes

Could you kindly let us know if you are able to provide some or all of the attached analytical services, and send us a copy of your ISO 17025 / test-specific certification if so?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Swab Test, AAQM, Water Analysis in KSA

Posted by: Chemist Posted on: October 3, 2022

Enquiry:

We are local manufacturer producing Tin cans and Plastic bottles for packaging.

Could you please advise whether you can perform the following tests which required to meet our BRC Standard for packaging:

Micro Biological Tests:

  1. Swab Collection and Microbiological Testing From Workers Uniform and Finished products. (Tests: Salmonella, Coliforms, Aerobic Plate Count, Escherichia Coli, Yeast & Mould).
  2. Bacteriological Tests for Municipal and Process water ( Total Coli form, Total Bacterial Count).

Chemical Tests:

  1. Analysis of Process water (pH, TDS, Fe, NO2,)
  2. Migration test for plastic bottle.
  3. Compressor air quality (Tests: Cabon Dioxide, Hydrocarbon, Moisture, Oxygen, Carbon Monoxide and Oduor).
  4.  

Environmental Tests:

Air quality  (Suspended Particulates Matter in Ambiant Air at production area, PM10). This should include respirable (inhalable) and non-respirable particulates matters (PM10) as well as total suspended particulates matters (SPM) calculated for 8 and 24 hours.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality Testing in Fujairah

Posted by: Chemist Posted on: August 15, 2022

Enquiry:

We are looking to get an indoor air quality test done for our place in Fujairah.

Can you send me the requirements to do a quotation for this.

If a site visit is required a 7-day negative PCR test is required for access.

Please let me know so I can make the necessary arrangements.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].