• Home
  • Archive by category "Environmental Testing"

Category: Environmental Testing

Wooden Door Paint Testing in Dammam, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

We are reaching out on behalf of our company ( Al Othman Wood Industries Based in KSA – Dammam )  regarding an upcoming project that requires compliance with CDPH Standard Method v1.2 (California Department of Public Health)

We would like to request your support and quotation for conducting VOC emissions testing for wooden doors paints in accordance with the CDPH v1.2 standard.

Kindly provide us with the following details:

  • Quotation for testing services
  • Sample size and preparation requirements
  • Lead time for testing and reporting
  • Any specific documentation required prior to testing

We are keen to proceed at the earliest and would appreciate your guidance on the next steps.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Environmental Monitoring in Al Ain, UAE

Posted by: Chemist Posted on: February 24, 2026

Enquiry:

We would like to request a quotation for conducting the Indoor Air, Indoor Noise, Lux & Ambient Air Quality Monitoring services at our facility.

Kindly provide your detailed proposal, including scope of work, methodology, timeline, and commercial terms at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

VOC Emission Testing in Jeddah, KSA

Posted by: Chemist Posted on: September 25, 2025

Enquiry:

Please find below details of the item required against the subject inquiry and submit your offer within 48 hours.

You are requested to kindly quote with your least bottom price & minimum delivery time for items in respective quantities.

Kindly acknowledge receipt of this inquiry and do let us know if you require any further information by replying all to this mail.

We would like to conduct VOC emission testing for Futura classic ,a two component chemically curing aliphatic acrylic polyurethane . Please find the attached Technical Data Sheet (TDS) for your reference.

We kindly request the following information’s:

  • The procedure to initiate testing.
  • The estimated cost of the test.
  • The expected duration to receive the results.
  • The testing standards you follow.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Microbiological Testing in Ajman, UAE

Posted by: Chemist Posted on: September 24, 2025

Enquiry:

We kindly request your quotation and service details for microbiological testing, as required for our facility. The scope of work includes:

  1. Surface and hand swab tests for employees and food-contact surfaces in compliance with food safety standards.
  2. Water tank microbiological analysis, covering parameters such as Total Plate Count, Coliforms, E. coli, and other standard microbiological indicators.

We would appreciate if you could provide us with the following information:

  • Quotation with detailed cost breakdown.
  • Sampling procedures and requirements (swabs, water sample volumes, containers, etc.).
  • Accreditation details of your laboratory (ISO/IEC 17025 or equivalent).
  • Turnaround time for testing and reporting.
  • Availability of on-site sample collection, if applicable.

Please send your official quotation and service proposal at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ambient Air, Stack Emission Testing in RAK, UAE

Posted by: Chemist Posted on: September 20, 2025

Enquiry:

We would also like to incorporate the following detailed testing and documentation for our submission to the RAK Government:

1. **Stack Emission Testing**

We require testing to be conducted on the main exhaust stacks, specifically before and after the filtration system. The parameters to be measured, using accredited laboratory methods (such as USEPA/EN standards), should include:

* Total Volatile Organic Compounds (TVOCs)

* Formaldehyde, Acetaldehyde

* SO₂, NOx, HCl, Cl₂

* Particulate Matter (PM₁₀ / PM₂.₅)

* Odor Concentration (OU/m³) – utilizing Dynamic Olfactometry (EN 13725)

The expected outcome for this testing is to demonstrate a clear reduction (≥ 80%) in odor-causing gases and particulates after the filtration system.

2. **Ambient Air Monitoring (Fenceline Study)**

For this, we request the placement of monitoring stations both upwind and downwind of our facility boundary. The monitoring period should be for 72 continuous hours, and the parameters to be measured include:

* TVOCs

* SO₂, NOx

* PM₂.₅ / PM₁₀

* Odor concentration

The expected outcome is to show no significant difference between downwind and upwind concentrations, thereby confirming effective odor control.

3. **Filtration System Performance Test**

We require measurements of pollutant concentrations at both the filter inlet and filter outlet to calculate the filtration efficiency (%) for each pollutant. The expected outcome is to document an efficiency of > 85% across key pollutants.

4. **Root Cause and Corrective Action Documentation**

We need documentation that addresses the root cause of odor emissions, which we’ve identified as being linked to VOCs and particulates during specific production stages. The corrective action taken is the installation of a multi-stage purification system (comprising pre-filters, ultraSORB chemical filters, and final filters). Additionally, preventive measures such as a scheduled maintenance and filter replacement plan, along with routine stack and ambient monitoring every 6 months, should be included.

5. **Deliverables for EPDA**

The final deliverables for submission to EPDA should include:

* Laboratory reports with before/after results.

* Graphs and tables clearly showing emission reductions.

* Photographs of the installed system and the monitoring setup.

* A comprehensive monitoring and compliance plan for ongoing reporting.

Could you please confirm if your company is recognized by the Ras Al Khaimah government/Municipality for these additional tests and provide an updated quote that incorporates these expanded requirements, including details on the cost and any other formalities? We are still aiming to schedule this as immediately as possible.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Acoustic Testing MDF Panels Theatre Riyadh, KSA

Posted by: Chemist Posted on: September 4, 2025

Enquiry:

I am reaching out on behalf of [Construction Tech], as we are currently working on a theatre project in Riyadh. The theatre design includes a circular ceiling and concrete walls, both clad with MDF-based wood panels.

For this project, we are sourcing materials from two different suppliers, and our client has requested that we conduct acoustic testing to evaluate and compare the performance of the products provided by both suppliers. In total, there are three main MDF-based panel products to be tested.

We would appreciate it if you could provide us with the following information:

      •     The scope of acoustic tests you can offer for MDF panels (e.g., sound absorption, sound transmission loss, etc.)

      •     Sample size and preparation requirements

      •     Lead time for testing and reporting

      •     Cost quotation for testing all three products from both suppliers

      •     Any standards or methodologies you follow (e.g., ISO, ASTM)

Please let us know if you require further details about the products or project specifications to prepare your proposal.

We look forward to your response and hope to collaborate with you on this project.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Soil Samples Testing in Riyadh, KSA

Posted by: Chemist Posted on: August 19, 2025

Enquiry:

We are interested in obtaining soil testing services for the following parameters: NPK, pH, organic matter, and electrical conductivity (EC).

Could you please:

  • Provide a quotation for testing 2–3 soil samples?
  • Confirm your available turnaround times and any sample submission requirements.
  • Share your company’s address in Riyadh, Saudi Arabia, or the appropriate contact details for service coordination.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].