• Home
  • Archive by category "AFFF Foam Analysis"

Firefighting System Inspection and Foam Testing in KSA

Enquiry:

We are currently looking for an ISO/IEC 17025 accredited laboratory to perform professional testing, analysis, and performance verification for our firefighting foam system inventory located in Riyadh, Saudi Arabia.

To ensure complete compliance with Saudi Civil Defense regulations, international standards, we require the following parameters to be analyzed:

• Testing Standards Required: Compliance with NFPA 11 (Standard for Low-, Medium-, and High-Expansion Foam) and/or UL 162 (Standard for Foam Equipment and Liquid Concentrates).

• Core Parameters to Check: Foam expansion ratio, drainage time, physical-chemical properties (viscosity, pH, specific gravity), and refractive index/induction verification if applicable.

• Foam Specification: [Foam Type, AFFF 3%]

• Number of Samples: [2 samples]

Could you please provide us with a formal quotation and clarify the following:

1. What is your standard turnaround time (TAT) for the official test reports?

2. What sample volume/quantity do you require per test?

3. Do you provide sample collection services within Riyadh, or should the samples be delivered directly to your facility?

Please share your latest accreditation certificates (such as SAC or international equivalents recognized by the Civil Defense). We look with interest to your prompt proposal.



One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Firefighting Foam Testing Periodic Contract in Qatar

Enquiry:

Please provide your best price for below samples testing and report submission,

Firefighting Foam Concentrate Testing and Evaluation, applicable physical/chemical and foam-property testing, evaluation and final laboratory report – 75 QTY

Expected Samples :- 

  • AFFF
  • AR-AFFF
  • FFFP
  • SFFF
  • Other firefighting foam concentrates used by COMPANY during the Contract period.

Commercial Note :-

1. Unit rates shall be firm and fixed for the Contract period unless otherwise specified in the Contract.

2. Laboratory testing shall be carried out through a COMPANY-approved, appropriately qualified/accredited laboratory.

3. Retesting required due to laboratory error, invalid testing, sample loss or handling error attributable to the laboratory shall be at no additional cost to COMPANY.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

AFFF Foam Concentrate Testing in Malaysia

Enquiry:

Sehubungan dengan adanya kebutuhan untuk pengetesan foam concentrate type AFFF 3% di tempat kami dengan 2 sample brand yang berbeda, maka mohon dapat dikirimkan penawaran harga untuk pengetesan foam concentrate sesuai dengan parameter MSC.1/Circ.1312. Demikian disampaikan, atas perhatian dan kerjasamanya kami ucapkan terimakasih.

We require testing for 3% AFFF foam concentrate—involving samples from two different brands—at our facility. We would appreciate it if you could provide a price quotation for testing the foam concentrate in accordance with the parameters set out in MSC.1/Circ.1312. Thank you for your attention and cooperation.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Aqueous Film Forming Foam AFFF concentrate Testing in UAE

Enquiry:

We would like to request your quotation for testing of Aqueous Film Forming Foam (AFFF) firefighting foam concentrate.

The purpose of the testing is to verify the quality, compliance, and performance of the AFFF against the applicable UAE requirements and internationally recognized standards.

Kindly provide your quotation based on the applicable AFFF standard specification and test methods.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

FP70, AR AFFF Foam Testing in Karachi, Pakistan

Enquiry:

FP 70 and AR AFFF Foam Testing

With reference to the subject matter, we intend to share RFQ for Annual Contract for FP 70 & AR AFFF Foam Testing.

In this regard, please find attached scope of work for your review. If you provide the required services, then kindly fill out the attached form so we can onboard you on our SAP ARIBA for bidding purposes,


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Foam Samples Testing Offload at Gijón, Spain

Enquiry:

Vessel Name: ___________

ETA GIJON Spain: 03 June 2026

ETB Gijon : ________

ETD Gijon: 6th June 2026

We intend to offload the following foam samples at Gijón for testing. Kindly advise the testing charges for each sample and provide the required procedure for offloading and submitting the samples for analysis.

Samples to be tested:

  1. Fixed Foam System Sample
  2. Yamato Foam Sample – 9 Ltrs (one bottle)
  3. Longbao AFFF Foam Sample – 9 Ltrs (one bottle)

Additionally, please provide the delivery address and any specific documentation requirements for sending the samples to your laboratory.

As the vessel schedule is tight, your urgent response and support will be highly appreciated.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Firefighting Foam Testing in KSA

Enquiry:

Kindly provide your quotation for laboratory testing of a firefighting foam sample. The foam is stored outdoors and is considered old/expired; therefore, evaluation is required.

The type of foam is AFFF 3% but it needs to be confirmed from the lab.

Scope of testing:

  • PFAS analysis
  • Acute toxicity & irritation (skin/eye)
  • Environmental toxicity & biodegradability
  • Chemical properties (pH, corrosivity)
  • Foam performance (expansion ratio, 25% drainage time, stability)

Please include in your offer:

  • Price breakdown
  • Required sample quantity
  • Turnaround time
  • Test methods/standards

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Foam Concentrate Testing in Malaysia

Enquiry:

We would like to request a quotation from your side for the following testing service:

Service Required: Laboratory Foam Concentrate Testing (NFPA 11 – Low Expansion Foam)
Sample: 1L Foam Concentrate (1 sample)
Scope of Testing:
The foam testing report shall include analysis for the following parameters:

  • Appearance
  • pH
  • Viscosity
  • Surface Tension
  • Sediment
  • Specific Gravity
  • Expansion Rates
  • Quarter Drainage
  • Fire Extinguishment Properties

Note: Kindly include in your quotation the cost for sampling and collection as well. 

Should you require further details or documents, please do not hesitate to contact us. We look forward to your prompt response.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].