• Home
  • Archive by category "Iraq"

Category: Iraq

Iraq

Lifting and HSE Training in Iraq, Kuwait

Posted by: Chemist Posted on: February 9, 2026

Enquiry:

We would like to inquire whether your company can provide lifting-related training services, as we have an upcoming requirement with a tight timeline.

Kindly confirm if you are able to support with the following:

– Certified lifting trainers

– Relevant lifting / HSE training courses

– Training facilities (classroom setup)

– Training materials and trainee assessment methods

If available, please share your company profile, details of the training programs you offer, and any relevant certifications or experience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lube Oil Testing in Umm Qasr, Iraq

Posted by: Chemist Posted on: September 10, 2025

Enquiry:

We would like to request a comprehensive lube oil analysis in accordance with ASTM standards. Kindly provide your official quotation for the following tests:

  • Viscosity Index
  • Total Base Number (TBN)
  • Total Solids
  • Water Content
  • Viscosity @ 40°C & 100°C
  • Wear Metals (Fe, Pb, Cu, Cr, Al, Ni, Ag, Sn, Ti, Cd, V)
  • Contamination (Na, Si)
  • Additives (P, Ca, Mg, Zn, B, Ba, Mo)

For more detailed information regarding the samples and requirements, please refer to the attached file.

Additionally, please confirm the following:

  1. Your testing charges (per sample).
  2. The exact sample quantity required to perform all of the above tests.
  3. The expected turnaround time for test results after sample receipt.

As this information is urgently required for our internal planning, we would greatly appreciate your prompt response.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Fountain Material and Testing in Erbil, Iraq

Posted by: Chemist Posted on: May 2, 2025

Enquiry:

I would be grateful if you could provide me your offer for Lab analysis procedures and materials for one month for the water fountain system, the SOW and datasheets are attached for more of your reference.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chocolate Testing in Basra, Iraq

Posted by: Chemist Posted on: April 30, 2025

Enquiry:

I have a warehouse in Khor Al Zubair Free Zone and would like to conduct a steel analysis on its structure. 

Please provide me with the deliverables you offer regarding the steel analysis and what are the information required from our side.

We can schedule a call to discuss further.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Cement Samples Testing in Iraq

Posted by: Chemist Posted on: February 20, 2025

Enquiry:

We required a testing of cement sample as per below list of  chemical & physical analysis. Kindly send us quotation.

Chemical Analysis
LOI
SiO2
Al2O3
Fe2O3
CaO
MgO
SO3
Na2O
K2O
Cl
LSF
SM
AM
C3S
C2S
C3A
C4AF
Physical Tests
Blaine (cm2/gm)
Residue (45 µ )
Expansion(mm)
Consistency (%)
Setting Time (min)
Initial
Final
Strength (Mpa)
2 Days Strength
7 Days Strength
28 Days Strength

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Didecyl Dimethyl Ammonium Chloride in Iraq

Posted by: Chemist Posted on: February 18, 2025

Enquiry:

We would like to request your assistance in conducting a thorough analysis of the chemical substance DIDECYL DIMETHYL AMMONIUM CHLORIDE, which is currently located in the Jurf Al-Nadaf area of Baghdad,IRAQ.

Enclosed with this email, you will find the results of the previous material  conducted by our company, as well as the testing report from the Chinese supplier. In order to proceed with our obligations to the supplier, we kindly ask you to perform the necessary testing on the aforementioned substance and provide us with a detailed report of your findings. This will be indicate the difference in  the specification of subject material especially in PH meter that should be in  the range (6-9) .

This report will be essential for us to send to the Chinese company as per their request. Once we receive your analysis, we will be able to return the material to them accordingly.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Domestic Plastic Tank Water Testing in Iraq

Posted by: Chemist Posted on: February 16, 2025

Enquiry:

I have recently heard about your test quality regarding the plastic reservoirs for drinkable water especially (toxicity tests), and i want to know more about you guys, I am a mechanical engineer at the general directorate of investment in garmyian district in Kurdistan region- Iraq which holds more than 30 residential projects. There are a great potential for coorporation and sending sample tests to your center in the future. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metallic Parts Testing in Basra, Iraq

Posted by: Chemist Posted on: February 6, 2025

Enquiry:

Could you please confirm whether you are able to conduct the chemical analysis of the metallic parts of the New PRODUCED WATER TANK (body, bottom, roof, nozzles)?

The objectives of the analysis are as follows:

Determining the sulfur and phosphorus content to confirm that the carbon steel grade complies with the NACE MR-0175 requirements for materials intended for use in environments containing H₂S.

Performing the analysis using one of the following methods, whichever can be completed more quickly, including the report:

  1. Conducting a detailed chemical analysis with the use of a mobile metal analyzer with argon purging.
  2. Collecting metal shavings from drilled holes made directly on the equipment in areas with identified corrosion damage, followed by laboratory testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].