• Home
  • Archive by category "Malaysia"

Category: Malaysia

Malaysia

Foam Testing in Sarawak, Malaysia

Posted by: Chemist Posted on: January 20, 2023

Enquiry:

We would like to get a quote to perform a foam concentrate test for one sample. Refer below details for your reference.

Foam sample quantity : 1 sample

Brand : Foamgard

Foam concentration : 3%

Foam location : Bintulu, Sarawak.

Appreciate to advise the address for us to deliver the sample and requirement to perform the test. (foam concentrates & produce foam testing)

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Clay Material Testing in Malaysia

Posted by: Chemist Posted on: November 1, 2022

Enquiry:

Greetings and we would like to enquire whether your lab got conduct these testing as below or not:

No.Name of testingType of sampleAvailable (Yes/No)ISO/IEC 17025 accredited (yes/no)
1Particle size distribution test by particle size analyzer        Clay      
2Dilatometric analysis up to 1100 deg  (coefficient of expansion)  
3Fired shrinkage and weight loss  
4Water absorption  
5Specific gravity  
6Moisture content  
7Fired color (L, a, b, whiteness index)  
8Residual content in clayey material  

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Fuel Sample Testing in Malaysia

Posted by: Chemist Posted on: July 31, 2022

Enquiry:

Our ship had to take onboard an unfamiliar brand of marine diesel fuel, & we require a Fuel Oil Lubricity Wear Scar Diameter test to Standard ASTM D 6079-18? 

Does your lab undertake such testing & if so what is the turn-around time & cost?

The fuel is type Petronas Diesel Euro 2M (B0), ultra-low Sulphur fuel oil 2.9 mg/kg, & the representative sample size is 1 litre – is this large enough for your purposes?

Our ship will be landing the sample in Malaysia.  Can you suggest the best way to get the sample to your lab?  Thanks.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Artic Foam Testing in Malaysia

Posted by: Chemist Posted on: July 18, 2022

Enquiry:

We would like to enquire testing of 1 bottle of Artic Foam 603EF ATC3%-3% Qty: 500ml.

Sample is located in Selangor, Malaysia.

Appreciate if you can direct us to the Lab in Malaysia, thank you.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Firefighting Foam Test, Control Valves Inspection in Malaysia

Posted by: Chemist Posted on: January 18, 2022

Enquiry:

Kindly quote us with your best price, availability, validity terms & condition for performing 5 year produced foam test accordingly to below requirement:

  • 5-Year Maintenance Test of Fixed Foam Extinguishing System covering Deck (Maker: NK/ Distribution Lines: 1/ Foam Monitors: 9)

·         five-Year Maintenance (according to last MSC.1/ Circ. 1432) including internal inspection of all control valves

·         all foam proportioners or other foam mixing devices to confirm that the mixing ratio tolerance is within +30 to -10% of the nominal mixing ratio defined by the system approval  à Produced Foam Sample to be taken. Do you have an approved lab for performing the 5-year produced foam test?

·         flush all high expansion foam system piping with fresh water, drain and purge with air

·         check all nozzles to prove they are clear of debris

One of our highly competent and certified lab would be taking over this project.

Glove and Metals Testing Malaysia

Posted by: Chemist Posted on: September 8, 2021

Enquiry:

I would like to ask do your company provide a service on: 

1) analyzing glove using chemo test, ASTM D6978

2) heavy metal test on glove – inside the glove; and how much it would penetrate into skin.

3) percentage of vinyl in nitrile (l)

If you do, kindly advise for the procedure and quotation. 

One of our competent lab would be taking over these tests.