• Home
  • Archive by category "Material Testing Enquiries"

Category: Material Testing Enquiries

Material Testing Enquiries

Material Testing in Pakistan

Posted by: Chemist Posted on: September 22, 2025

Enquiry:

I am conducting research on natural fiber–reinforced composites and am interested in evaluating their impact energy absorption characteristics in accordance with ISO 6603-2 (Low-Velocity Puncture/Impact Test). I would like to confirm whether your facility has the capability to perform this test and to request a quotation.

Specifically, I would appreciate information on the following:

1.      Testing Capability

o    Availability of ISO 6603-2 testing 

o    Impact testing machine specifications and mass options.

o    Fixture/support dimensions (internal and external diameters).

o    Impact energy and velocity ranges achievable.

o    Data acquisition rate and availability of force–displacement curves in both graphical and raw (CSV) formats.

o    Possibility of high-speed imaging (frame rate, cost if additional).

2.      Specimen Requirements

o    Recommended geometry and dimensions for flat composite laminates 

o    Number of specimens required per condition.

o    Conditioning requirements (temperature, relative humidity).

3.      Quotation Details

o    Cost per specimen (and any bulk discount if testing multiple samples).

o    Turnaround time for testing and reporting.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Bottled Nest Products Testing in Singapore

Posted by: Chemist Posted on: September 19, 2025

Enquiry:

Writing to inquire whether your laboratory offers analysis services for bottled bird’s nest products. I’m looking to determine the percentage content of actual bird’s nest in samples that may also contain ingredients such as fungus, gum, and water.

Could you kindly confirm if this type of analysis is within your capabilities? 

Additionally, I would appreciate it if you could provide details on the following:
• Estimated cost of the analysis
• Typical turnaround time
• Required sample size
• Whether your lab holds ISO/IEC 17025 accreditation

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Door Bell Material Testing Certificate in Rahima, KSA

Posted by: Chemist Posted on: September 18, 2025

Enquiry:

We would like to have a test for DOORBELL EBG 888, in our current project, as mandatory requirement material test certificate is required.

Kindly we seek your support if you can arrange Material Test Certificate for us.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

PV Panel Anti-slip, Pullout Testing in Riyadh, KSA

Posted by: Chemist Posted on: September 17, 2025

Enquiry:

Following our review of the installed PV panels with a total surface area of 9,769 m², we request your proposal for carrying out the following tests:

  1. Pull-out Test
  2. Slip Resistance Test (Anti-slip Test)
  1. Details of roof’s structural integrity, roof membrane, and substrate material : The roof is a steel structure roof, with external roof panels installed using a 360-degree standing seam locking system to ensure waterproofing. The substrate is aluzinc color steel sheet with insulation layer, thickness 0.6 mm. The roof’s structural strength and load-bearing capacity have been verified to meet the requirements for PV system installation.
  2. Standard specification required by client for these tests : At present, our client has not specified any particular standard. We would like to know which specific codes or standards are generally applied in Saudi Arabia for these tests, so that we can align with your professional recommendations.
  3. Attached specified installation of steel frames and fittings used for PV panel, which includes detailed parameters of the clamps as well as the installation method.

Project Location : Riyadh, KSA

We kindly request you to provide your best quotation for the above tests, including the required quantity of each test and the estimated time schedule for completion.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Rubber Gasket Testing in Egypt

Posted by: Chemist Posted on: September 17, 2025

Enquiry:

We have a sample of a rubber gasket that used usually in a glass handrail that located outdoor (external use) and marine weather (north coast – Egypt).

We need to test this sample to figure out the base material if it is EPDM base, silicone base, PVC base, etc.

Please advise if you’re capable for doing such a test and the most fast timing can be offered as well as the price, noting that the sample is about 100mm length.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gypsum Rock and Fire Resistance Test in Kuwait

Posted by: Chemist Posted on: September 9, 2025

Enquiry:

Please quote us your best price for following test to the gypsum rock :

  1. Sieve residue curve of the particles is required.
  2. Hardness value. Mohs Hardness will be the unit.
  3. Chemical test parameter, pls follow the below table.
GYPSUM
 blockpanel
CaSO4>   
CaSO4·H2O>   
MgO≤ 
Chloride<  
Particle size
(befor grinfing)		≤ 
Residue: 90μm (ground)≤ 
Humidity≤ 
SO3≥ 

Furthermore, we would like to know if you perform Fire Resistance Test for AAC Blocks.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Mosaic Tiles Testing in Dubai, UAE

Posted by: Chemist Posted on: September 1, 2025

Enquiry:

I’m writing to ask whether your lab conducts testing of mosaic tiles in accordance with the following standards:

  1. ISO 10545-13
  2. ISO 10545-9
  3. ISO 10545-3
  4. ISO 10545 12
  5. DIN 51094
  6. ASTM C 424

If so, please provide the quotation, estimated turnaround time and sample submission requirements

Mosaic tiles are of dimension 20 x20mm Square & Triangular mosaics base-33mm, height 30mm

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Marble Floor Slip Resistance Test in Al Khobar, KSA

Posted by: Chemist Posted on: August 19, 2025

Enquiry:

May we request you to please send us your offer and earliest delivery time as per below requirements.

Project Location: Dhahran

Please indicate the following terms in your offer:

  1. Discount:
  2. Payment Term:
  3. Delivery Term:
  4. Delivery Period:
  5. Warranty:
  6. Validity:
LINE ITEM # DESCRIPTION ORDERED QUANTITY UNIT 1 To do Slip Test of Marble Floor Tile for 3 Areas in Dhahran

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

GRE Pipes Compatibility Evaluation with Oilfield, UAE

Posted by: Chemist Posted on: July 24, 2025

Enquiry:

Please provide your most competitive price for the item in the inquiry below.

  1. EVALUATING THE COMPATABILTY GRE PIPE WITH OILFILED ENVIRONMENTS AS PER NACE INTERNATIONAL STANDARD- Ø100 MM- 1 Set

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].