• Home
  • Archive by category "Material Testing Enquiries"

Powdered Bird Nest Testing in Singapore

Enquiry:

I want to inquire about the possibility of conducting laboratory tests on a sample of powdered bird’s nest. Specifically, I would like to test for the following:

1. Authenticity – to verify if the powder is made from genuine bird’s nest.

2. Purity – to detect any additives, adulterants, or contaminants (e.g., starch, sugar, gelatin, etc.).

3. Nutritional Value / Health Benefits – to determine whether the powdered form retains key beneficial components such as sialic acid, protein, and other essential nutrients typically found in natural bird’s nest.

Could you kindly advise:

The types of tests you can offer for this purpose

The sample quantity required.

The testing process and estimated turnaround time The cost for each test Any special instructions for submitting the sample

I would appreciate any additional recommendations based on your expertise in bird’s nest or food-grade powder testing.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Vinyl Sheet Testing as per DNV in Dubai, UAE

Enquiry:

We have Procured Vinyl Sheet , and we wanted to check if this materials resistance values between 1x10E6 to 1x10E9 Ohms and we need reports for the conducted test and result. Also it should comply with DNV requirements.

Kindly let us know below
1. if you can do this ?
2.what is the process/?
3. How much time will it take?
4. What documents do you need?


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Construction Material Testing in Al Ain, UAE

Enquiry:

We would like to request you to provide the best competitive price for third party lab test services for our Upcoming project for construction of Cycle track, Bridges and Underpasses  in AL AIN.

Materials  testing under below mentioned scope of works to be covered :

  • Asphalt works for cycle tracks
  • Structural works –Bridges & Underpasses
  • Concrete Works
  • Earthworks ( Soil Investigation )
  • Hardscape Materials

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Faucet Material Testing in Sharjah, UAE

Enquiry:

We are a sanitaryware supplier and are currently seeking to conduct material testing on one of our faucet models.

We would like to ensure that the material and coating meet the required industry standards for quality, durability, and safety.

Could you please provide us with the following:

  • Details of the tests you offer related to faucet materials (e.g., material composition, coating thickness, salt spray test, lead content, etc.)
  • Turnaround time and cost estimates
  • Any specific sample requirements or documentation needed

We look forward to your response and hope to initiate this process at the earliest convenience.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Material testing for H2S NACE standard in Dammam, KSA

Enquiry:

We are looking for Conducting the below test on our material , please let us know if your company can do this test, then kindly share your firm quote along with best possible lead time.

Requirement: To conduct H2S Testing ( focusing on Material Resistance to Sulfide Stress Cracking (SSC))  on AISI 4145 Grade Forging material (Low Alloy).

Standard required : As per NACE MR 1075 & NACE TM0177

Testing purpose: To find the SSC Susceptibility analyzation ( H2S % Resistance values )  along with other additional relevant information which you can provide.

Material Sample : we will provide you with the Material Sample along with MTC. Let us know what the dimensions of the Sample will be required, so will cut accordingly.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Steel Abrasive Material Testing ISO 11124-3 in KSA

Enquiry:

We manufacture steel abrasives

We have 25 samples to test now in accordance with ISO 11124-3 to submit to aramco,

If you can do then I will send you the details of ISO 11124-3 ( for your reference).

these tests are generally required for the samples

1. hardness 

2. size distribution

3. chemical composition

4. moisture

5 density

6. foreign particle

7. defects


Ceramic Tile Slip Resistance Test DIN51097 B in KSA

Enquiry:

We are writing to inquire about the possibility of conducting slip resistance testing in accordance with  DIN 51097 (Class B) standards, commonly referred to as ‘R10B’.

We kindly request the following information:

1. Test quotation (price, lead time, payment terms)

2. Sample requirements (quantity, dimensions, preparation)

3. Testing procedure and expected duration

4. Certification or test report format issued upon completion

We intend to provide ceramic tile samples for the test. Please advise if any specific documentation or application form is required along with the samples.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Florine, KBF4 Sand Testing in Lowa, USA

Enquiry:

We are an Aluminum and Magnesium sand casting company.

I came across your website and company while searching for sand testing services and was wondering if you could answer some questions/help us out.

We put KBF4 into our sand and from time to time we test it to make sure enough is getting mixed in.

I was wondering if you test for Florine or for and parts of KBF4 at all.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Cement Samples Testing in Iraq

Enquiry:

We required a testing of cement sample as per below list of  chemical & physical analysis. Kindly send us quotation.

Chemical Analysis
LOI
SiO2
Al2O3
Fe2O3
CaO
MgO
SO3
Na2O
K2O
Cl
LSF
SM
AM
C3S
C2S
C3A
C4AF
Physical Tests
Blaine (cm2/gm)
Residue (45 µ )
Expansion(mm)
Consistency (%)
Setting Time (min)
Initial
Final
Strength (Mpa)
2 Days Strength
7 Days Strength
28 Days Strength


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].