Enquiry:

Could you please provide a quotation for the following analyses? We would also appreciate it if you could specify the analytical methods that will be used for each test.

1. Total Metals – Elemental Composition (mg/kg)

Purpose: Quantify all valuable and hazardous metals present in the solid slag.

Preferred Methods:

•              Sample Preparation: Acid digestion using USEPA 3050B, 3051A, or

3052 (or an equivalent ISO method).

•              Instrumental Analysis: ICP-OES or ICP-MS.

•              Reporting Units: mg/kg (ppm).

Elements to be analyzed:

•              Valuable metals: Copper (Cu), Nickel (Ni), Cobalt (Co), Manganese

(Mn), Zinc (Zn)

•              Hazardous metals: Lead (Pb), Mercury (Hg), Antimony (Sb), Arsenic

(As)

•              Matrix elements: Iron (Fe), Aluminum (Al), Silicon (Si), Calcium

(Ca), Magnesium (Mg), Chromium (Cr)

2. Bulk Matrix Composition

Purpose: Determine the oxide and mineral composition of the slag for processing and recovery assessment.

Preferred Methods:

•              X-ray Fluorescence (XRF): Full oxide composition (e.g., SiO₂,

Fe₂O₃, Al₂O₃, CaO, MgO, etc.)

•              Loss on Ignition (LOI): Determination of volatile content

3. Environmental Hazard Characterization – Leachability

Purpose: Assess the potential for metal leaching into the environment.

Preferred Methods:

•              TCLP Leaching Test: USEPA Method 1311 (or equivalent)

•              Leachate Analysis: ICP-OES or ICP-MS

•              Reporting Units: mg/L

Elements to be analyzed in the leachate:

Lead (Pb), Mercury (Hg), Arsenic (As), Antimony (Sb), Copper (Cu), Nickel (Ni), Zinc (Zn), Manganese (Mn), Cobalt (Co), Chromium (Cr), and Cadmium (Cd).

4. Reporting Requirements

Please include the following with the analytical report:

•              Certificates of Analysis (COA)

•              Detection limits for each analyte

•              Full analytical method references

•              QA/QC documentation

•              Estimated turnaround time

•              Confirmation that all methods are accredited under ISO/IEC 17025

(or an equivalent accreditation)

We would appreciate it if you could also indicate whether all of the above analyses can be performed in your laboratory. If any tests are unavailable, kindly specify which ones.

Thank you for your assistance. I look forward to your reply.

---

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].