• Home
  • Archive by category "Oman"

Category: Oman

Oman

Firefighting Foam Testing in Oman

Posted by: Chemist Posted on: October 14, 2026

Enquiry:

You are invited to participate in the above RFQ subject. Please acknowledge the receipt of this mail and submit your quotation before or on the due date.

Thanks in anticipation of your immediate response.

Firefighting system Foam sample testing

Timeline is as below:

1RFQ issue date14.10.2026
2Site visitN/A
3Proposal and offer submission date22.10.2026

Remarks :

Please provide two offers one for technical and one for commrecail

Notes

  • Any offers or clarification received after the deadline, will NOT be acceptable neither entertained.
  • ______ Salalah has the right to split the requirements as needed.
  • Vendor to attach datasheet or catalog of items for evaluation purpose.
  • Vendor to attach represent litter if he is the agent for any manufacture

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Oil Sample Testing in Oman

Posted by: Chemist Posted on: October 8, 2026

Enquiry:

  • Kindly provide your best offer for Transformer Oil Composition Analysis as per ISO/ IEC-17025 accreditation.
  •  
  • The following analysis and tests shall be conducted in an accredited laboratory, and the corresponding test reports shall be submitted along with observations and recommendations, if any.
  •  

1.Water Content

2.Break Down Voltage,

3.Color

4.Neutralization Value

5.Dissolved gas Analysis

  1. Hydrogen
  1. Methane
  2. Ethane
  3. Ethylene
  4. Acetylene
  5. Carbon monoxide
  6. Carbon Dioxide
  7. Nitrogen
  8. Oxygen
  9. Total diss.gas
  10. Total comb.gas

Note: The oil sample will be delivered to your office by our team.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ambient Air Quality Testing for Industrial Workshop in Oman

Posted by: Chemist Posted on: September 23, 2026

Enquiry:

I am reaching out on behalf of our factory, a fabrication workshop located in Misfah Industrial Estate, Muscat.

We are looking to conduct Ambient Air Quality Testing at our facility. The approximate dimension of our workshop is 13 metres (W) × 40 metres (L).

Kindly confirm whether you provide this type of testing service and, if so, please provide us with your Quotation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

LPG Cylinder Calibration and Testing in Muscat, Oman

Posted by: Chemist Posted on: September 13, 2026

Enquiry:

Please provide your best quotation for conducting inspection and testing of our 22kg LPG cylinder in accordance with ISO 22991:2004 requirements.

The required tests are as follows:

  • Visual Examination
  • Hydrostatic Test
  • Pneumatic Test
  • Burst Test
  • Mechanical Test
  • Bend Test
  • Radiography Examination

Please let us know if you require any additional information or supporting documents.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water, Oil, and Foam Testing Contract in Oman

Posted by: Chemist Posted on: September 7, 2026

Enquiry:

Established in 1964, we are a Saudi listed joint stock company engaged in land and offshore drilling activities and operates land rigs as well as offshore jack-up rigs in the Kingdom of Saudi Arabia and in the Partitioned Neutral Zone with Kuwait.

We provide a variety of top-quality drilling services to extract oil and gas safely and efficiently for our clients and we are well positioned to handle the most challenging drilling programs, Training and developing our own people, with an emphasis on Saudi Nationals.

We are committed to be a leader in the drilling contracting business, best in class Customer service, Technology & Quality, to be second to none in QHSE performance, to the optimum protection of the environment in which its operations are conducted,

to make an excellent return for shareholders’ wealth.

We are hereby asking all bidders to provide the prices for RFP- sewage water /Oil sample analysis and foam analysis in Oman DUQUM

Kindly follow below schedule for the subject bid submission without fail:

No.EventDate/TimeResponsible Party
1RFP Release07-09-2026
2Confirmation email for participation in the bid08-09-2026
3Last date to submit inquiries/Clarifications09-09-2026
4Proposal submission/ RFI closing date13-09-2026

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Wastewater, Desalination Water Samples Testing in Oman

Posted by: Chemist Posted on: September 1, 2026

Enquiry:

I work for a Spanish company specialized in Water Treatment. We are currently preparing an offer for some Tenders which include the O&M of multiple water and wastewater facilities.

For this matter, we would like contact laboratories operating in Oman and to receive quotations. Could you, please, share with us your prices for water testing (both wastewater and desalination samples)?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Design Validation Testing of Valves in Oman

Posted by: Chemist Posted on: August 31, 2026

Enquiry:

we are a Valve manufacturing facility in Oman and are looking for vendors who can conduct Design Validation Testing of Valves as MESC 77/300.

We have a requirement of testing for 2 valves. (valves will be free issued to FITECH).

  1. 8” x 2500# Trunnion Mounted Ball Valve, RB, Soft Seated, gear operated, Raised Face – 01 Valve
  2. 1 ½” x 2500# Floating Ball, Soft Seated – 01 Valve

The sequence as per MESC 77/300 will be 8. Bi-dir.≥-29°C<0°C>80°C≤200°C

Design Temperature of both valves are:  Minimum: -29 Deg C and Maximum: + 120 Deg C.

Do you have testing tool for torque measurement at various stages which is part of DVT.

Do you have Mechanical Cycling fixture/set up which is also part of DVT at various stages.

Requesting you for your best offer and the timeline required to successfully complete the DVT. Also please share the PTR for any previous jobs executed wherein TAT was performed at your facility.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Testing Laboratories Serving Middle East

Posted by: Chemist Posted on: August 17, 2026

ISO CERTIFIED LABS SERVING MIDDLE EAST & WORLDWIDE!
We are here to serve you with all accreditations across entire globe!
Email: [email protected]
Web: www.accreditedtestlabs.com
Oil & Gas Testing, Food & Water Testing, Material and Metals Testing, Environmental Testing, Agri Products Testing & More…
Middle East – Far East – Africa – Europe – America – Australia – Asia
Saudi Arabia | UAE | Bahrain | Kuwait | Qatar | Sudan | Egypt | Turkey | Lebanon | India | Pakistan | Sri Lanka and more..
#oiltesting #gastesting #foodtesting #watertesting #ballastwater #saudiarabia #fujairah #ISO17025 #labsinmiddleeast #uae #usa #europe #KSAlife #oman #qatar #bahrain #Kuwait #Houston #rotterdam

ISO Certified labs in Middle East

Anemometer Thermometer Sound Level Meter Calibration in Oman

Posted by: Chemist Posted on: August 4, 2026

Enquiry:

I would like to enquire about the calibration of the following instruments. Kindly provide your best quotation for the calibration services.

  1. Anemometer – 1 No.
  2. Mini Thermometer – 1 No.
  3. Sound Level Meter – 1 No.

Please include the calibration charges, turnaround time, and validity of the quotation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Equipment Calibration in Oman

Posted by: Chemist Posted on: July 29, 2026

Enquiry:

Could you please send the calibration certificates for the following equipment at your earliest convenience:

  • Blood Pressure Monitor
  • Pulse Oximeter
  • Ear Thermometer
  • BGM (Blood Glucose Monitor)

Your prompt response would be appreciated.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].