• Home
  • Archive by category "Enquiries"

Category: Enquiries

Enquiries about inspection, testing, calibration and product purchases.

Hydraulic Oil Testing in Dubai, UAE

Posted by: Chemist Posted on: October 12, 2026

Enquiry:

Kindly advise with attached your itemized firm price and delivery time basis for the following item.

DescriptionRemarksUnit of MeasurementUoMQuantity
00080OIL HYD;ZTCARTEREP320;CARTER EP 320,208LOIL, HYDRAULIC; BRAND NAME: CARTER EP 320, CONTAINER CAPACITY: 208 L; MANUFACTURER PART NO: l(Liter)2

NOTE: Kindly reply to the same e-mail & don’t remove who are in CC. You can Add but please do not change the subject while replying.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Annual Food Testing Contract in Abu Dhabi, UAE

Posted by: Chemist Posted on: October 10, 2026

Enquiry:

Kindly provide a quotation for an annual food testing contract; with sampling conducted once per month, regarding the following scope:

CategoryTest DescriptionNo. of Samples
Microbiological Analysis of Hot FoodAerobic Plate Count2
Bacillus cereus
Campylobacter spp.
Clostridium perfringens
E. coli O157
Enterobacteriaceae
Escherichia coli
Listeria monocytogenes
Salmonella spp.
Staphylococcus aureus
Yeast and Moulds
Aerobic Plate Count
Bacillus cereus
Microbiological Analysis of Cold FoodCampylobacter spp.2
Clostridium perfringens
E. coli O157
Enterobacteriaceae
Escherichia coli
Listeria monocytogenes
Salmonella spp.
Staphylococcus aureus
Yeast and Moulds
Hand SwabTotal Coliforms1
Total Plate Count
Surface SwabTotal Plate Count1
Total Coliforms
Microbiological Analysis of WaterE. coli1
Fecal Coliforms
Heterotrophic Plate Count
Pseudomonas aeruginosa
Total Coliforms
Total No. of Samples/ Month7 Nos.

Please include the pricing details, testing reference, and turnaround time in your quotation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing as per RCJ Compliance in Jubail, KSA

Posted by: Chemist Posted on: October 10, 2026

Enquiry:

I am reaching out to inquire about your analytical testing capabilities for water and wastewater samples. We need to conduct testing for a specific suite of parameters, and it is critical that the methods and reporting fully comply with the Royal Commission of Jubail (RCJ) requirements.

Below are the parameters required in the test report:

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Regasified Liquified Natural Gas Testing in Lahore, Pakistan

Posted by: Chemist Posted on: October 9, 2026

Enquiry:
Kindly provide your quotation for RLNG (Regasified Liquefied Natural Gas) testing, with sample collection to be arranged at our Industries plant site.

The required testing parameters are as follows:

  1. Hydrocarbon Composition: Methane, Ethane, Propane, and other hydrocarbons.
  2. Nitrogen (N₂) Content
  3. Carbon Dioxide (CO₂) Content
  4. Total Sulphur Content

Please also confirm the following details:

Whether the report will include the individual gas composition percentages and total sulphur concentration.

Sample collection arrangements at the site, Thatta, Sindh.

Applicable testing methods and standards.

Sampling charges and total testing cost, including applicable taxes.

Required sampling conditions and any arrangements needed at the site.

Expected turnaround time (TAT).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Floor and Wall Tiles Testing in Dubai, UAE

Posted by: Chemist Posted on: October 9, 2026

Enquiry:

We would like to inquiry for the laboratory testing of floor and wall tiles intended for our residential development project in Dubai, UAE. Kindly review the below list of required tests and provide your quotation for each test separately, along with the total testing cost.

1. Required Laboratory Tests

Sl. No.Test DescriptionApplicable Standard
1Determination of Water AbsorptionISO 10545-3
2Determination of Dimensions and Surface QualityISO 10545-2
3Determination of Resistance to Deep AbrasionISO 10545-6
4Determination of Coefficient of Linear Thermal ExpansionISO 10545-8
5Determination of Resistance to Thermal ShockISO 10545-9
6Determination of Chemical ResistanceISO 10545-13
7Determination of Stain ResistanceISO 10545-14
8Determination of Slip ResistanceApplicable ISO / EN test standard, depending on the intended application
9Determination of Brightness / Gloss Level for Polished TilesApplicable test method to be confirmed
10Colour Stability / Resistance to LightApplicable test method to be confirmed

2. Laboratory & Reporting Requirements

Please confirm the following:

  1. Individual testing charges and total cost for all tests.
  2. Sample quantity and dimensions required for each test.
  3. Estimated testing duration and report submission timeline.
  4. Applicable taxes and any additional charges.
  5. Confirmation that the laboratory is ISO/IEC 17025 accredited for the relevant test methods.
  6. Confirmation that signed laboratory test reports will be provided, indicating the actual test results and applicable standards.
  7. Sample submission procedure and laboratory address.

Please also advise if any of the above tests are not available at your laboratory and recommend suitable alternative test methods, where applicable.

We request you to submit your most competitive quotation at the earliest for our review and approval.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Oil Sample Testing in Oman

Posted by: Chemist Posted on: October 8, 2026

Enquiry:

  • Kindly provide your best offer for Transformer Oil Composition Analysis as per ISO/ IEC-17025 accreditation.
  •  
  • The following analysis and tests shall be conducted in an accredited laboratory, and the corresponding test reports shall be submitted along with observations and recommendations, if any.
  •  

1.Water Content

2.Break Down Voltage,

3.Color

4.Neutralization Value

5.Dissolved gas Analysis

  1. Hydrogen
  1. Methane
  2. Ethane
  3. Ethylene
  4. Acetylene
  5. Carbon monoxide
  6. Carbon Dioxide
  7. Nitrogen
  8. Oxygen
  9. Total diss.gas
  10. Total comb.gas

Note: The oil sample will be delivered to your office by our team.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Oil Testing in Southern Province, KSA

Posted by: Chemist Posted on: October 8, 2026

Enquiry:

Please find attached the Request for Quotation (RFQ) for your review.

We kindly request you to submit your quotation with the highest possible discount.

Please be sure that your submitted offer complies with the following instructions to ensure proper consideration:

  1. Deadline Compliance: No offers will be considered after the closing date, which is ____________.

Thank you for your attention to these details. We look forward to receiving your submission.

Details of item requirement :
SPB For Line-2 Transformers oil analysis
S. No. Item No. Item Description Quantity UOM
00010 SPB For Line-2 Transformers oil analysis
10 1.000 %
Important Instructions: Be sure that your submitted offer is complying with the following instructions

  1. No offers will be considered after the closing date.
  2. If your offer is equivalent to/or above SAR 50,001.00, please make sure that:
    a. Your offer must be split into two parts i.e., Technical & commercial.
    b. Technical offer can be submitted to this email positively by closing date.
    c. Commercial offer must be submitted ONLY to our dedicated email ID ____________ by
    closing date.
  3. Please contact the undersigned for any clarifications and other queries before the RFQ deadline.
  4. Freight cost need to be included in Commercial offer.
  5. Correspondence, Quotations and All Questions: for this RFQ shall be addressed to the following emails:
    1. RFQ Creator Mail :
  6. Copy To:
    1)Manager Supply Chain Engr.
    2)Head of Procurement. Engr.
    Terms & Conditions: Terms & Conditions: This RFQ is subject to our standard Terms & Conditions of Purchase
    available upon request.
    Alternative Offer: Please provide full technical specifications when offering alternative materials.
    RFQ Acknowledgement: Please acknowledge this RFQ upon receipt Also, please advise if you are unable to
    meet the closing date or if you are declining to bid

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Crane Gear Oil Samples Testing in Maharashtra, India

Posted by: Chemist Posted on: October 8, 2026

Enquiry:

Kindly check the below gearbox oil testing job and submit your best price/ quote.

PR No: 10198858.

Job description: EOT CRANE GEARBOX OIL ANALYSIS & HEALTH ASSEEEMENT FOR APPROX NOS EOT CRANES.  

Scope of Work – EOT Crane Gearbox Oil Analysis & Health Assessment

• Collect oil samples from designated EOT crane gearboxes using standard contamination-free procedures.

• Record gearbox details, lubricant type, operating condition, and sampling information.

• Conduct laboratory testing of oil samples to evaluate viscosity, contamination, moisture content, wear metals, oxidation, and lubricant health.

• Assess gearbox condition based on oil analysis results and identify signs of gear wear, bearing wear, contamination, or lubricant degradation.

• Perform visual inspection of gearboxes for leakage, abnormal noise, overheating, and general condition.

• Submit a detailed report indicating gearbox health status, oil condition, risk assessment, and recommendations for corrective actions such as oil replacement, filtration, inspection, or overhaul planning.

• Classify each gearbox condition as Healthy, Monitor, Attention Required, or Critical based on analysis findings.

Please submit your techno-commercial quotation at the earliest along with company credentials and relevant experience in industrial gearbox oil analysis and condition monitoring.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

VOC Emission Test for Parquet

Posted by: Chemist Posted on: October 6, 2026

Enquiry:

We would like to make the VOC tests for our engineered wood florring. We did it in Germany for Oil and now we would like to make it for lacquered product but it takes there more than 3 months.

Could you please provide you offer, samples request and timeling from receiving of samples?  

Emission test according to DIN EN 16516 / AgBB-Scheme 2024

“Engineered parquet floorings”, 2-layer (4 mm oak top layer; Substrate layer: birch plywood) Surface treatments: UV-lacquered,

Total thicknesses: 13mm –  15,5 mm -19,5 mm (3 options but we sent only max size 19.5).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].