• Home
  • Archive by category "Enquiries"

Category: Enquiries

Enquiries about inspection, testing, calibration and product purchases.

Water Testing for School in Riyadh, KSA

Posted by: Chemist Posted on: October 6, 2026

Enquiry:

We are currently looking for a company/laboratory to conduct water quality testing for our facility.

Kindly advise us on the procedure for collecting and submitting the water samples for testing, including whether the samples will be collected by your team or need to be provided by us.

Please also share the following information:

  • Available water testing packages and parameters
  • Sampling and testing procedure
  • Cost of the testing services
  • Estimated time required to receive the test results
  • Laboratory accreditation/certification details
  • Format of the final water quality test report

Kindly share your quotation along with the relevant details so that we can review and proceed accordingly. We look forward to your prompt response.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Multiple Instruments Calibration Contract in Baghdad, Iraq

Posted by: Chemist Posted on: October 5, 2026

Enquiry:

Our company at Iraq is seeking qualified subcontractors for the provision of Instrumentation Calibration Services.

Please find attached the following documents for your review and submission:

SCOP OF WORK 1.docx

Technical Data.docx

Technical Questions (Calibration).xlsx

Pricing Table.xlsx

Kindly submit the following:

Technical proposal addressing the scope and technical requirements.

Completed Technical Questions (Calibration).xlsx.

Completed Pricing Table.xlsx with your commercial offer.

Copy of ISO/IEC 17025 accreditation certificate.

Copy of ISO 9001 certificate (if available).

Company profile and relevant Oil & Gas calibration experience.

–              Our Terms and Conditions of Payment:

–              Payment will be made via bank transfer only (through business bank account not personal).

–              No cash payments will be processed under any circumstances.

–              Our payment term is 30 net days from the invoice date

Kindly submit your comprehensive proposal by Thursday, __________.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Onsite Calibration, Certification of Flowmeters in Abu Dhabi, UAE

Posted by: Chemist Posted on: October 5, 2026

Enquiry:

We invite your quotation for the on-site calibration of two flow meters and the issuance of third-party inspection or calibration certificates.

Kindly provide your quotation, including the calibration scope and standard, accreditation details, certificate issuance period, site attendance date, service duration, and all applicable charges.

Working location: Saadiyat Island, Abu Dhabi, UAE.

Please submit your quotation on or before 12:00 PM,_____________.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

LPG Storage Tank Calibration in Ajman, UAE

Posted by: Chemist Posted on: October 5, 2026

Enquiry:

I would like to request a quotation for Inspection and Certification for Nitrogen Testing of an LPG storage tank with the following details:

Tank Capacity: 5000 Litres

Tank Type: Horizontal , Underground , Manufactured in 2009

Brand: Antonio Merloni

Maximum Working Pressure: 17.65 Bar

Kindly provide your quotation along with your earliest availability for conducting the test.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

HFO Fuel Complete Analysis COA in Al Jouf, KSA

Posted by: Chemist Posted on: October 5, 2026

Enquiry:

We intend to procure the items and quantities specified in the attached inquiry (Ref. No. ________).

HFO fuel complete analysis With Certificate

In this regard, you are kindly requested to submit your best competitive quotation along with the shortest possible delivery time.

For tracking purposes, please ensure that your quotation clearly states ________in the subject line. Quotations received without the reference number may not be considered.

Kindly include and clarify the following terms and conditions in your offer:

Price Basis: Ex-Works, CFR, CPT, or DDP.

Please note that our preferred basis is DDP to our warehouse, although other options will also be considered.

Payment Terms: Credit, Advance Payment, Cash Against Documents (CAD), or After Delivery.

Please note that our preferred payment term is After Delivery, although other options may also be considered.

Delivery Time: Please specify the earliest delivery schedule.

Please note that delays in delivery may be subject to penalty.

Offer Validity: Preferably a minimum of 30 days.

A shorter validity period may be accepted only for goods subject to unstable market prices.

Country of Origin, Gross Weight, Proper Packing Method, Warranty Period, and Product Type / Brand must be clearly stated in your quotation.

Any deviations from the requested specifications must be clearly highlighted and explained in your offer.

Warranty Terms and Conditions should be clearly specified, including coverage period and scope.

The closing date for this inquiry is on or before 11 Oct 2026.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Contract for 15 Vessels Fleet Oil, Foam, Water Testing in Jubail, KSA

Posted by: Chemist Posted on: October 4, 2026

Enquiry:

Periodic Lab Contract for Lube Oil, MGO, Fuel Oil, FF Foam, Fresh Water, Ballast Water Testing

As we are currently reviewing our laboratory service requirements and inviting selected vendors to submit their commercial proposals, we would like to initiate a formal rate contract with your Lab for the approximately 14-15 vessels we currently manage in KSA .

Kindly provide us with your best and most competitive rate proposal for the below requirements so that we can review the same and proceed towards establishing a formal agreement with your Lab.

For products having Sulphur content less than 500 ppm then the standard recommends to do “lubricity” test according to ISO 12156 method & the cost related to this to be provoided seperately in addition to the above-mentioned charges.

Kindly also provide your quote basis the below :

  • Fuel Oil Analysis as per RMG/ RME –ISO 8217: 2017 Spec
  • Foam Analysis -Basic Test/Parameters ref below
  • Foam Analysis (With Fire test and Chemical Stability) ref below

– Foam Concentration Test ref below

Please note the following PO arrangements:

  • Pos will be issued from our Shipworkz Dubai office . 15% VAT to be added as well during invoicing

For each analysis/service included in your proposal, kindly clearly specify:

  • Sample quantity required for each analysis.
  • Turnaround time – number of days required to complete the analysis and issue the report after receipt of the sample at your laboratory. Samples to be collected from our office located at Jubail.
  • Free sampling bottles to be provided, including secure lids/caps and appropriate labels.

Expected Sampling Frequency

Please consider the anticipated volume of samples based on the following frequency:

  • Main engine and auxiliary engine lube oil: Analysis every 3 months.
  • Other equipment: Analysis every 6 months.

We would appreciate your best commercial rates, taking into consideration the anticipated volume of samples and our intention to establish a long-term business relationship with us.

Please treat the proposed rates and commercial information as strictly confidential and kindly refrain from forwarding or copying this communication to any internal or external stakeholder without our prior consent.

Should you have any questions or require further clarification regarding the scope, please feel free to contact me directly.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Contract for Mineral Oil Analysis for Transformers in Qatar

Posted by: Chemist Posted on: October 4, 2026

Enquiry:

Transformer Mineral Oil Testing 03 Years Contract

QPMC is looking for qualified Contractor who have the capability to Supply/ provide the Services as per the attached Scope of work.

Please find attached RFE Document with Scope of Work for your reference.

Kindly submit your estimate proposal prior the closing date.

Note: Bidders are required to submit all technical and commercial documents in searchable PDF format to facilitate efficient review and evaluation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Filter Plan Drinking Water Testing in Jubail, KSA

Posted by: Chemist Posted on: October 3, 2026

Enquiry:

We would like to enquire about third-party laboratory testing and approval of drinking water produced from our newly installed water treatment plant at Plant.

The water treatment plant is ready for use; however, prior to using the treated water for drinking purposes, we understand that the water should be tested by an approved/accredited third-party laboratory to verify that it meets the applicable drinking-water quality standards.

Kindly provide us with your quotation and details for the required testing, including:

  • Required water quality tests and parameters
  • Applicable drinking-water standards/specifications
  • Sampling procedure and number of samples required
  • Laboratory accreditation/approval details
  • Testing charges
  • Expected turnaround time for the test report
  • Validity or renewal requirements, if applicable
  • Any certificates or documents required from our side
  •  

Please also advise whether your team can arrange on-site water sampling at Abu Hadriya Camp and issue an official laboratory test report/certificate confirming the suitability of the treated water for drinking purposes.

Kindly submit your commercial offer along with the scope of testing at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality Testing at Beirut, Lebanon

Posted by: Chemist Posted on: October 2, 2026

Enquiry:

We are based at Beirut Digital District (BDD) and would like to request a quotation for an indoor air quality assessment at our office premises.

We have concerns regarding the quality of the air within the office and would like to evaluate whether the HVAC/air conditioning system, particularly the AC fans and air circulation, may be affecting the indoor environment. We would appreciate your recommendation on the appropriate testing and inspections required, as well as a professional report outlining the findings and any recommendations.

Could you please confirm whether you can provide this service and send us a quotation detailing the proposed scope of work, methodology, deliverables, and any site requirements?

Given the urgency of this matter, we would appreciate receiving your quotation by Tuesday, 6 October 2026.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gas Analysis for Smoke Filtration Product in Sharjah, UAE

Posted by: Chemist Posted on: October 1, 2026

Enquiry:

We are a manufacturing company developing an innovative, eco-friendly gas-absorbent mineral powder designed to filter and neutralize toxic emissions from Shisha (Hookah) smoke.

We are looking for an accredited testing partner to conduct a practical “before and after” comparative analysis of the smoke to officially verify our product’s filtration efficacy.

Specifically, we require a complete compositional gas analysis of the raw smoke compared to the smoke after it passes through our absorbent material. The real-time monitoring and analysis must include the following parameters:

  • Carbon Monoxide (CO) (Highest priority)
  • Benzo(a)pyrene (Carcinogenic compound)
  • Hydrogen Sulfide (H2S) & other Sulfur Compounds (RHS)
  • Ammonia (NH3) & Nitrogen Compounds (NOx)

Could you please confirm if your laboratory has the equipment and capability to perform this full spectrum analysis? If so, kindly provide your commercial quotation and outline your testing requirements (e.g., sample size, setup).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].