• Home
  • Archive by category "Pakistan"

Secure Your Engines and Machines, Lubricant Testing

Secure your engines and machines from big damages through our state of the art ISO certified testing of Lube Oil, Engine Oil, Hydraulic, Chiller Oil.
OCM | FTIR | Particle Count – ISO 17025 Certified
WORLDWIDE SERVING LABORATORIES.
Email: [email protected] Web: www.accreditedtestlabs.com
Oil Condition Monitoring
Fourier Transform Infrared Spectroscopy
MIDDLE EAST | FAR EAST | SUB-CONTINENT | EUROPE | AMERICA

ISO certified testing of Lube Oil, Engine Oil, Hydraulic, Chiller Oil.

Major Enquiries Processed in May, 2026

Here is list of major enquiries that we have processed in the month of May, 2026.

Write us today should you have similar requisites: [email protected]

  • Water Samples Testing in Dubai, UAE       
  • Water and Microbiological Testing in Riyadh, KSA       
  • Metal Strips Testing SEM/EBSD in Europe       
  • Repair, Calibration of Pressure Calibrator in UAE       
  • DGA Inhouse Training in Europe and UAE       
  • Gas Purity Testing in UAQ, Dubai, Port Khalifa, UAE       
  • BBQ Charcoal and Vinegar Testing in UAE       
  • Mercedese Used Engine Oil Testing in Kuwait       
  • Vessel Fuel Oil and Fresh Water Testing as per ADNOC, UAE       
  • Water Testing for Water Treatment Plant in Al Safaniya, KSA       
  • Machine Hydraulic Oil Testing in KSA       
  • Seawater Testing in Riyadh, KSA       
  • Base Oil Saturates Testing in Egypt       
  • Marine Diesel Oil Testing in Turkey       
  • BWTS System Annual Inspection in Abu Dhabi, UAE       
  • Indoor and Outdoor Air Quality Testing in Muscat, Oman       
  • Spectrophotometric Lab Testing in Kuwait       
  • Crude Oil Testing in Yanbu, KSA       
  • Re-Labelling Inspection in Dammam, KSA       
  • Emission, Water, Environmental Testing in Pakistan       
  • Drinking Water Quality Testing in Riyadh, KSA       
  • Molten Zinc Analysis in Jubail, KSA       
  • Liquid Fertilizers Testing as per SEWA in KSA       
  • VISCO Elastic Coating Testing in Iraq       
  • Diesel Quality Testing as per ADNOC, Dubai, UAE       
  • Water Testing in Rotterdam, Europe       
  • Air Quality, Noise, Water Testing in Sharjah, UAE       
  • Diesel Tank Inspection in Ras Al Khaimah, UAE       
  • Ballast Water Sampling and Testing in Port Said, Egypt       
  • Waste Water Testing in Al Malaz Riyadh, KSA       
  • Deflection Test of GRP Pipes in Mussafah, UAE       
  • Bunker Remaining Onboard BROB Survey at El Dekheila, Egypt       
  • Chiller Oil Testing in Abu Dhabi, UAE       
  • Asbestos Testing in Hilla, Karbala, Iraq       
  • Frying Oil Testing in Malta, Europe       
  • GCIR Emulsifier Performance Test in Dammam, KSA       
  • Calibration of Equipment in Yanbu, KSA       
  • Underground Water Tank Inspection in Dammam, KSA       
  • Microbiological Testing Annual Contract in Riyadh, KSA
get a quote

Get a Quote Today
Instant response!
[email protected]
Middle East – Far East – Africa – Europe – America – Australia – Asia

contact today

Natural Gas Compositional Analysis C11+, BTX in Pakistan

Enquiry:

We would like to request a quotation for the following laboratory analysis services for a natural gas sample (Sale Gas),

  1. Natural Gas Compositional Analysis up to C11+, including BTX.
  2. Moisture Content Analysis.

Kindly provide the following information in your quotation,

  • Testing method/standard to be used.
  • Turnaround time for analysis and reporting.
  • Commercial quotation, including all applicable charges.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

FP70, AR AFFF Foam Testing in Karachi, Pakistan

Enquiry:

FP 70 and AR AFFF Foam Testing

With reference to the subject matter, we intend to share RFQ for Annual Contract for FP 70 & AR AFFF Foam Testing.

In this regard, please find attached scope of work for your review. If you provide the required services, then kindly fill out the attached form so we can onboard you on our SAP ARIBA for bidding purposes,


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

PCB, Oil Level Sensor Transformer Oil Test in Pakistan

Enquiry:

I wanted to formally document the specific testing scope required for the Smart Controller PCB and the Oil Level Sensor.

As agreed, all procedures, criteria, and environmental parameters will strictly comply with IEC 60076-22-1 (Power transformers – Part 22-1: Electrical equipment – Standard accessories).

To ensure full compliance and regulatory safety for these transformer accessories, we will be conducting the following tests within the agreed 3-to-4-day window:

1. Dielectric & Insulation Testing

  • Insulation Resistance Test: To verify the integrity of the isolation between active electronic circuits and the chassis/ground.
  • Dielectric Test (Withstand Voltage): High-voltage stress test to ensure no electrical breakdown or flashover occurs under standard-defined test voltage levels.

2. Electromagnetic Compatibility (EMC) Immunity Testing

  • ESD (Electrostatic Discharge) Immunity Test: To evaluate the sensor and PCB’s resilience against direct and indirect static discharges.
  • EFT/Burst (Electrical Fast Transient) Test: To ensure the controller’s electronics remain stable and unaffected by rapid transient spikes on power or signal/telemetry lines.
  • Surge Immunity Test: To verify heavy-duty surge protection against high-energy overvoltage events (such as switching transients or simulated lightning surges).

3. Additional Specific Verification (per IEC 60076-22-1)

  • Ingress Protection & Environmental Performance: Ensuring the physical enclosures of the sensor/controller maintain their required IP ratings (typically IP66) and operation tolerances under specified transformer ambient and oil temperatures.
  • Contact Performance Verification: Ensuring the signal/alarm contacts reliably actuate without chatter or latching failures under normal and high-stress conditions.

IEC Document and product picture are attached above for your further assistance.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Emission, Water, Environmental Testing in Pakistan

Enquiry:

Kindly quote your best rates for the following test at Gulshan-e-Iqbal, Karachi on Urgent basis.

1. Gaseous Emission Tesing of Hovel Boiler1 Particulate Matter (By using 0.45 u filter paper)2 Sulphur Dioxide (SOz)3 Oxides of Nitrogen (NOx)Carbon Monoxide (CO)
2. Gaseous Emission Test (Chiller)Particulate Matter (By using 0.45 u filter paper)Sulphur Dioxide (SOz)Oxides of Nitrogen (NOx)Carbon Monoxide (CO)  
3. Noise Level Testing of Blow Molding MachinesNoise Level Testing per point
4. Waste Water TestingEffluent FlowTemperature Free of Cost pHBiochemical Oxygen Demand (BODs) 2,500Chemical Oxygen Demand (COD) 2,5O0Total Suspended Solids (TSS) 700Total Dissolved Solids (TDS) 700Grease & Oil 800Chloride (Cl) 700Phenolic Compound
5. Vehicle Emission Testing (Diesel Fork Lifters)Carbon Monoxide (CO)Smoke PointNoise
6. Vehicle Emission Testing (Toyota Hilux)Carbon Monoxide (CO)Smoke PointNoise
7. Vehicle Emission Testing (Toyota Vigo)Carbon Monoxide (CO)Smoke PointNoise
8. Granulator Room Noise TestNoise Level per point
9. Drinking Water Test.Bacteriological Analysis1 Total Coliform, Fecal Coliform, Escherichia Coli (E-Coli)2 Physical(i) Color(ii) Taste(iii) Adour(iv) Turbidity, NTU(v) Total Hardness as CaCO 3(vi) Total Dissolved Solids (TDS)(vii) pH3 Chemical
10. Soil Sample Testing1. pH Value L,70A2. Grease & Oil 2,5003. Arsenic (As) 6,6004. Barium (Ba) 4,8005. Cadmium (Cd) 4,8006. Chromium (Cr) 4,8007. Lead (Pb) 4,8008. Zinc (Zn) 4,8009. Silver (Ag) 4,80010.Selenium (Se) 4,80011. Mercury (Hg) 6,50012
11. Noise Testing of Diesel Fire Engine
12. Noise Testing of Boiler Room
13. Gaseous Emission of Diesel Fire Engine


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Pressure Gauges Calibration in Islamabad, Pakistan

Enquiry:

Please Quote for the following:-

  1. Calibration of Pressure Gauges (4000 & 6000 PSI)     Qty: 74
  2. Calibration of Pressure Gauges (100 & 150 PSI)         Qty: 22
  3. Calibration of Temperature Gauges (60 – 160 C)        Qty: 21
  4. RPM Gauges (upto 3000 RPM)                                    Qty: 21

Calibration certificates, reports and sticker/tags to be issued.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Stack Emission, Water Testing in Rawalpindi, Pakistan

Enquiry:

Please provide your quotation for the following testing and monitoring requirements:

Test AnalysisParameters
Wastewater water analysis31 parameters as per PEQS
Drinking Water Analysis30 parameters as PEQS
Ash AnalysisUnburnt Carbon
Stack Gaseous Emission monitoringCO2, Nox, SO2, Smoke NO. as per PEQS
Stack Gaseous Emission monitoringCO & O2

Kindly include your commercial proposal, lead time, and any specific requirements from our side to proceed.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].