• Home
  • Archive by category "Saudi Arabia"

Category: Saudi Arabia

Saudi Arabia

Underground Water Tank Inspection in Dammam, KSA

Posted by: Chemist Posted on: May 3, 2026

Enquiry:

We at Dammam Plant, would like to get your best offer for the following:

We kindly request your quotation for inspection of an underground water tank at our facility.

Scope of Work:

  • Visual and structural inspection of the underground water tank
  • Check for leaks, cracks, corrosion, and overall condition
  • Inspection of inlet/outlet piping and access covers
  • Assessment of cleanliness and suitability for water storage
  • Submission of an inspection report with findings, photos, and recommendations

Requirements:

  • Experienced and qualified inspection people
  • Compliance with applicable standards and safety requirements

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Microbiological Testing Annual Contract in Riyadh, KSA

Posted by: Chemist Posted on: May 3, 2026

Enquiry:

Kindly provide your best offer for Annual Microbiological Analysis Test, please take a note that:

  • Certification body must be accredited.

Please find the below table only for 20 tests/samples

GroupTest NameNo. of Test/ Sample
Surface Swab TestTPC2
M & Y2
Col.2
Hand Swab TestSalmonnella1
E.Coli Sp.1
Air TestTPC1
M & Y1
Water Micro TestE.Coli2
Total Coliforms2
Pseudomonas Aeruginosa2
Faecal Streptococci2
Suphic-Reducing Clostridia2
AreasMicrobilogical TestsSurface Swab TestHand Swab TestAir TestWater Micro TestTotal Tests (per year)
TPCM & YCol.SalmonnellaE.Coli Sp.TPCM & YE.ColiTotal ColiformsPseudomonas AeruginosaFaecal StreptococciSuphic-Reducing Clostridia
Test Technique / Method ReferenceAOAC990.12ISO21527-1AOAC991.14ISO6579-1 APHA-Compendium Chapter3APHA-Compendium Chapter3ISO7899AS 4276.5AS4276.13 ISO15213
Printing & Sheeting             
WIP Material (after printing /sheeting)            0
Part of the Machine touching the material            0
Operator / Line Crew / QC Technician            0
Near the machine       xxxxX5
Die Cutting & Lamination             
WIP Material (after die cutting & lamination)     XX     2
Part of the Machine touching the product            0
Operator / Line Crew / QC Technician            0
Near the machine       xxxxX5
Finishing & Molding             
Final Product (from the box/conveyor)XXX         3
Part of the Machine touching the productXXX         3
Operator / Line Crew   XX       2
Operator / Line Crew / QC Technician            0
Near the machine            0
Total Tests20

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metal Detector Validation Certificate in Al Khobar, KSA

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

We are currently looking for a qualified external supplier to carry out validation of our metal detectors and provide an official validation certificate in compliance with applicable standards.

Please let us know if you require any additional information to prepare your proposal.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Silica Sand 75micron Testing in KSA

Posted by: Chemist Posted on: April 21, 2026

Enquiry:

We are manufacturer of Fiber Cement Boards as per ASTM C1186. Kindly share your latest quotation for testing of Silica Sand 75 Micron with the following parameters:

  • Sieve Analysis – % passing 75 micron / 200 mesh
  • Moisture Content – % at 105°C
  • Loss on Ignition (LOI) – %
  • Chemical Analysis 
  • Particle Size

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Wooden Door Paint Testing in Dammam, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

We are reaching out on behalf of our company ( Al Othman Wood Industries Based in KSA – Dammam )  regarding an upcoming project that requires compliance with CDPH Standard Method v1.2 (California Department of Public Health)

We would like to request your support and quotation for conducting VOC emissions testing for wooden doors paints in accordance with the CDPH v1.2 standard.

Kindly provide us with the following details:

  • Quotation for testing services
  • Sample size and preparation requirements
  • Lead time for testing and reporting
  • Any specific documentation required prior to testing

We are keen to proceed at the earliest and would appreciate your guidance on the next steps.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Heavy Fuel Oil HFO Testing in Najran, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

send us offer for calibration of instruments in max 2 days.

Note: please advise how much qty of HFO required for below analysis?

SR. #Item DescriptionRequired QtyRemarks
1Analysis of Heavy Fuel Oil (HFO).—AS PER ATTACHED SOW01 
Testing parameterUnit of measure
Density at 50 degrees centigradegrams per milliliter (g/ml)
Density at 110 degrees centigradegrams per milliliter (g/ml)
Flash pointdegrees Centigrade (oC)
Heating Value (Gross)BTU per pound (BTU/lb)
Heating Value (Net)BTU per pound (BTU/lb)
Total Sulfur Contentpercent by weight (% wt)
Viscosity at 50 degrees centigradeCentistokes (cSt)
Viscosity at 110 degrees centigradeCentistokes (cSt)
Water contentPercent by volume (% vol.)
Wax contentPercent by weight (% wt.)

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Car Engine Oil Testing in Riyadh, KSA

Posted by: Chemist Posted on: April 19, 2026

Enquiry:

I have an old sports sedan car and want to send oil sample to lab to check out If copper/lead/bismuth are elevated so I know whether to change the bearings.

i want to know where your location is, what are the costs associated with the above tests and how long would it take. Also how to send you the oil sample if I am based in Riyadh.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Aquaculture Farm Water Testing in KSA

Posted by: Chemist Posted on: April 12, 2026

Enquiry:

I am setting up an aquaculture farm in Saudi Arabia and am interested in your water testing services. We need physical (e.g., pH, TDS, turbidity), chemical (e.g., ammonia, metals, hardness), and microbiological tests (e.g., E. coli, Legionella).

Could you kindly provide details on:

  1. How your testing process works.
  2. The cost of these tests.
  3. How soon we can receive the reports.
  4. Whether you collect water samples from the farm or if I need to bring them. If I need to bring them, how much water do you require?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].