• Home
  • Archive by category "Environment Testing"

Category: Environment Testing

Stack Emission, Water Testing in Rawalpindi, Pakistan

Posted by: Chemist Posted on: February 25, 2026

Enquiry:

Please provide your quotation for the following testing and monitoring requirements:

Test AnalysisParameters
Wastewater water analysis31 parameters as per PEQS
Drinking Water Analysis30 parameters as PEQS
Ash AnalysisUnburnt Carbon
Stack Gaseous Emission monitoringCO2, Nox, SO2, Smoke NO. as per PEQS
Stack Gaseous Emission monitoringCO & O2

Kindly include your commercial proposal, lead time, and any specific requirements from our side to proceed.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Ambient Air, Stack Emission Testing in RAK, UAE

Posted by: Chemist Posted on: September 20, 2025

Enquiry:

We would also like to incorporate the following detailed testing and documentation for our submission to the RAK Government:

1. **Stack Emission Testing**

We require testing to be conducted on the main exhaust stacks, specifically before and after the filtration system. The parameters to be measured, using accredited laboratory methods (such as USEPA/EN standards), should include:

* Total Volatile Organic Compounds (TVOCs)

* Formaldehyde, Acetaldehyde

* SO₂, NOx, HCl, Cl₂

* Particulate Matter (PM₁₀ / PM₂.₅)

* Odor Concentration (OU/m³) – utilizing Dynamic Olfactometry (EN 13725)

The expected outcome for this testing is to demonstrate a clear reduction (≥ 80%) in odor-causing gases and particulates after the filtration system.

2. **Ambient Air Monitoring (Fenceline Study)**

For this, we request the placement of monitoring stations both upwind and downwind of our facility boundary. The monitoring period should be for 72 continuous hours, and the parameters to be measured include:

* TVOCs

* SO₂, NOx

* PM₂.₅ / PM₁₀

* Odor concentration

The expected outcome is to show no significant difference between downwind and upwind concentrations, thereby confirming effective odor control.

3. **Filtration System Performance Test**

We require measurements of pollutant concentrations at both the filter inlet and filter outlet to calculate the filtration efficiency (%) for each pollutant. The expected outcome is to document an efficiency of > 85% across key pollutants.

4. **Root Cause and Corrective Action Documentation**

We need documentation that addresses the root cause of odor emissions, which we’ve identified as being linked to VOCs and particulates during specific production stages. The corrective action taken is the installation of a multi-stage purification system (comprising pre-filters, ultraSORB chemical filters, and final filters). Additionally, preventive measures such as a scheduled maintenance and filter replacement plan, along with routine stack and ambient monitoring every 6 months, should be included.

5. **Deliverables for EPDA**

The final deliverables for submission to EPDA should include:

* Laboratory reports with before/after results.

* Graphs and tables clearly showing emission reductions.

* Photographs of the installed system and the monitoring setup.

* A comprehensive monitoring and compliance plan for ongoing reporting.

Could you please confirm if your company is recognized by the Ras Al Khaimah government/Municipality for these additional tests and provide an updated quote that incorporates these expanded requirements, including details on the cost and any other formalities? We are still aiming to schedule this as immediately as possible.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Acoustic Testing MDF Panels Theatre Riyadh, KSA

Posted by: Chemist Posted on: September 4, 2025

Enquiry:

I am reaching out on behalf of [Construction Tech], as we are currently working on a theatre project in Riyadh. The theatre design includes a circular ceiling and concrete walls, both clad with MDF-based wood panels.

For this project, we are sourcing materials from two different suppliers, and our client has requested that we conduct acoustic testing to evaluate and compare the performance of the products provided by both suppliers. In total, there are three main MDF-based panel products to be tested.

We would appreciate it if you could provide us with the following information:

      •     The scope of acoustic tests you can offer for MDF panels (e.g., sound absorption, sound transmission loss, etc.)

      •     Sample size and preparation requirements

      •     Lead time for testing and reporting

      •     Cost quotation for testing all three products from both suppliers

      •     Any standards or methodologies you follow (e.g., ISO, ASTM)

Please let us know if you require further details about the products or project specifications to prepare your proposal.

We look forward to your response and hope to collaborate with you on this project.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Salt Spray Fog Testing in Jeddah, KSA

Posted by: Chemist Posted on: July 6, 2025

Enquiry:

I’m contacting you to request a quotation for the line items listed below

Sl No.Item No.
(Catelogue No / Standard Universal Code) / Service Requirement or based on previous PO if any		Item / Service Description (Detail if Std Code is not available)Need Date
(DD-Mon-YYYY)		Qty RequiredUnit of MeasureSupplier Name / Contact Details / Remarks
3 Salt Spray (Fog) test as per ASTM B117 of step panel (size 10″x3″)25-Jun-2520EAPanels will be prepared and chromated in house by us using Bonderite M-CR 1201 Aero and the sent to lab for Salt Spray Test as per ASTM B117. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Indoor Air Quality and Noise Testing in UAE

Posted by: Chemist Posted on: July 31, 2021 , , ,

Indoor ambient air quality testing services available under the accreditation of ISO/IEC, DAC, DMC and as per regional standards. Room atmosphere must have to be tested to qualify for the domestic or industrial standards. Room Ambient Air Quality testing certificates are required for hotels and real estate accommodations to meet the star ratings. Also for the industries to test the compartments atomosphere for human suitability, especially where machines are running and noise is produced and certain smoke emissions are expected. In fact there are multiple factors those have to be complied with standards and specifications of the International and local standards for the healthy environment. These factors are the Air quality Testing, Noise Testing, Dust Testing, Smoke Emission Testing etc.

Now problem arises when you don’t have authentic resource from where you can get the all specific tests conducted with ISO certification. AccreditedTestLabs.com brings to you highly competent and certified laboratories those are accredited by International organizatios and the local agencies as well.

So, if you are looking for any kind of Environmental Testing Services in UAE including but not limited to Indoor and Outdoor air quality testing, you can write us anytime.

To Get a Quote -> [email protected]

To learn more about the subject, visit our page Environmental Testing Services in Middle East.

Environmental & Water Testing in Pakistan

Posted by: Chemist Posted on: June 6, 2020 , ,

We are pleased to confirm our associate lab’s capability to perform all types of environmental testing including noise test, microbiological test, Ambient Air Quality Monitoring etc. Also testing of potable water, waste water, laundry water and chemical sludge mixed water.

Our lab is ISO/IEC: 17025, EPA, ISO 9001:2008, ISO 14001:2004 & OHSAS 18001:2007 certified and equipped well with proficient highly qualified chemists as well as with cutting edge technology state of the art laboratory equipment.

Environmental Survey, Auditing & Consulting for all projects. Water Treatment/Purification Plant Designing and consulting.

We can accommodate your jobs Pakistan-wide with coverage to Karachi, Quetta, Hyderabad, Lahore, Islamabad, Faisalabad, Gujranwala, Kashmir and northern areas.

So, feel free to write us in full confidence for any kind of testing.

Quick Quote/Enquiry: [email protected]

Environmental Testing in KSA

Posted by: Chemist Posted on: June 9, 2019 ,

Environmental monitoring or testing is acute requisite in many areas due to nature of the operations, work or living there. For example, hospitals generally require inner environment testing of their operation theater rooms. Same way, there are noise and sound sensitive areas where noise testing or instantaneous noise testing is always required.

These testing include microbiological analysis of air and may include surface as well as ambient air testing.

We have labs in Saudi that cope these type of environmental testing with dexterity and accredited scope.

Inspection and Lab Testing in Pakistan

Posted by: Chemist Posted on: June 3, 2019

Pakistan is one the top business hubs across the globe where trading is concerned, hence Qasim seaport, Kemari seaport and now Gawadar port is also becoming popular and busy for import and export of commodities. Cargo inspections, vessel survey, and bunker/draft survey for loading and discharge is the utmost need since many ships and oil tankers engaging harbors everyday. There are multiple inspection companies performing surveys on the ports and off as well however, it’s not easy to find the best among all that could meet standards and is certified for the scope.

Similarly laboratory testing is the other requisite that generally come with most of the inspection jobs like oil and gas, food and water, material and metals etc and still the house is open for power companies, industries and many other sectors where oil, gas, material, metals and machinery itself involved. There is one common and regular need of lubricating oils to almost all industries, automobiles, aviation and equipment as well. All we need is to use appropriate standard lube oil for our machines or motors and to regularly check the quality meeting criteria of the technical guidelines. This could only be done through lab testing from accredited and certified bodies within the region.

AccreditedTestLabs.com helps you to find cheap and best, accredited and highly capable company that conforms to all ISO, IFIA standards and local authorities recommendations for both inspection and the lab testing needs.

So feel free to contact us and we shall be please to assist you.