Ground Water Testing Project in Sudan

Enquiry:

Please find attached our call for tender for water geochemistry analysis for our project in Sudan.

Your financial and technical proposals must be sent before 03/01/2022.

Table 1 : Spec Sheet for Groundwater Quality Analysis
Analyte Units of Measurement Result

Physical and Aesthetic Determinands
pH pH units
Electrical Conductivity @ 25°C uS/cm
Total Suspended Solids mg/l
Total Dissolved Solids mg/l
True Colour PCU
Chemical Determinands – Macro Determinands
Total Alkalinity as CaCO3 mg/l
Bicarbonate Alkalinity as CaCO3 mg/l
Sulphate as SO4 mg/l
Chloride mg/l
Nitrate as NO3 mg/l
Nitrite as NO2 mg/l
Ortho Phosphate as PO4 mg/l
Ammoniacal Nitrogen as NH3 mg/l
Calcium mg/l
Calcium Hardness Dissolved (as CaCO3) mg/l
Magnesium mg/l
Magnesium Hardness Dissolved (as CaCO3) mg/l
Sodium mg/l
Potassium mg/l
Chemical Determinands -Micro Determinands
Dissolved Aluminium ug/l
Dissolved Antimony ug/l
Dissolved Arsenic ug/l
Dissolved Barium ug/l
Dissolved Beryllium ug/l
Dissolved Boron ug/l
Dissolved Cadmium ug/l
Total Dissolved Chromium ug/l
Dissolved Cobalt ug/l
Dissolved Copper ug/l
Total Dissolved Iron ug/l
Dissolved Lead ug/l
Dissolved Manganese ug/l
Dissolved Mercury ug/l
Dissolved Molybdenum ug/l
Dissolved Nickel ug/l
Dissolved Phosphorous ug/l
Dissolved Selenium ug/l
Dissolved Thallium ug/l
Dissolved Vanadium ug/l


One of our highly proficient and certified laboratory would be taking over this testing.

MGO Testing in Rotterdam

Enquiry:

Please send us your best offer for the MGO sample analysis as per the same parameters in the attached previous lab report.

Offer should be included for the collection of MGO sample from our Vessel in Rotterdam and to deliver to your lab for testing.


One of our highly proficient and certified laboratory in Europe would be taking over this testing.

Water Testing in KSA

Enquiry:

I would like please to know if the below tests needed for water could be done in your lab:

[1] PHYSICAL PARAMETERS:
1– Colour
2– Turbidity
3– Odour
[2] PHYSICOCHEMICAL PARAMETERS:
4pH
5Conductivity
6Total hardness as (CaCO3)
7Calcium (Ca)
8Magnesium (Mg)
9Bicarbonate ( HCO3 )
10Total alkalinity as (Ca CO3)
11Bicarbonate alkalinity as (Ca CO3)
12Carbonate alkalinity as (Ca CO3)
13Hydroxide alkalinity as (Ca CO3)
14Sodium [Na+]
15Potassium ,[k+]
16Chloride [CI ]
17Sulphate [SO4 ]
18Total suspened solid (TSS)
19Total dissolved solids [ TDS ]
[3] UNDESIRABLE SUBSTANCES:
20Ammonium [NH4+]
21Nitrates [ NO3 ]
21Nitrite [NO2]
22Phosphate [PO4]
23Silica [SiO2]
24Iron [Fe]
25Manganese [Mn]
26Copper [Cu]
27Zinc [Zn]
28Free chlorine
29Fluoride [F]
30Aluminium [Al]
31Lead [Pb]
 If yes please send us your best quotation.

One of our highly proficient and certified laboratory would be taking over this testing.

Lubricanting Oil Testing in Saudi Arabia

Enquiry:

Please provide us a quotation of lube oil sample testing for the following analysis parameters:

No DescriptionTest Method
1Viscosity at 40 ̊CASTM D445
2Moisture contentASTM D 6304-20
3Acid NumberASTM D664
4Spectrometric AnalysesASTM D5185
5RPVOTASTM D2272
6Particle CountISO 4406

If any concern or further information, please reply back to this email.


One of our highly proficient and certified laboratory would be taking over this testing.