• Home
  • 2025
  • February
  • 03

Laboratory Design, Equipment, and Furniture Setup in Oman

Enquiry:

We are in the process of developing a large-scale shrimp project in Oman for local and international markets.

Aquatic Investments Excellence LLC is a JV based in Muscat owned by GTR Royal trading (D42, Dubai) 61% and Fisheries Development Oman 39% (FDO, Oman) to develop a large-scale shrimp farming operation in Sultanate of Oman. The project site is located at Al Jazer, Al Wusta Governorate, 750KM south of Muscat, and 200Km south of Duqm on the coast of Arabian sea covering an estimated area of approximately 8600 hacters. After full  commissioning we will be harvesting 220,000 M.ton of P.Vannamei Shrimps each year.

For the above project we are excited to invite bio-test laboratory vendors to submit a proposal for the design, supply and commission of a state-of-the-art laboratory for Aquatic Investments Excellence LLC at Al-Jazir, 200KM South of DUQM. We are looking for a comprehensive solution that includes both the layout design, the necessary laboratory equipment & supplies and commissioning of Bio Laboratory.

Project Overview:

  • Scope: The design of a fully functional laboratory space, inclusive of layout planning, furniture, equipment, and specialized supplies tailored to our specific needs, our list of tests against the sample required in laboratory can be found in attachment.
  • Objective: To create a modern, efficient, and safety-compliant laboratory environment for routine checks of water, shrimps and environment parameters.

Requirements:

  • Detailed layout and floor plan of the proposed laboratory space.
  • Specifications and recommendations for the laboratory furniture, equipment, and supplies.
  • Installation and setup of all lab equipment.
  • Compliance with relevant health, safety, and environmental regulations.
  • Commissioning of the Laboratory.
  • After-sales support and maintenance services.

We would appreciate it if you could submit your proposal by 10 February 2025, which includes:

  1. A detailed approach to the project.
  2. A breakdown of costs, including design, supply & installation, and commissioning.
  3. A timeline for completion.
  4. Previous experience in similar projects or relevant case studies.
  5. Any other supporting documents or information relevant to our requirement.

Please feel free to reach out if you have any questions or need further clarification.

We look forward to reviewing your proposal and working with you on this exciting project.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

CO Gas Sensor Testing in Singapore

Enquiry:

I am with the Institute of Microelectronics. I am reaching out to inquire whether your company offers facilities for testing CO gas sensors.

We have developed a CO gas sensor and are interested in characterizing its performance. Specifically, we would like to conduct testing under different CO concentration levels.

Could you kindly provide a budgetary quotation for sensor characterization, with the following details:

  • Gas: Carbon Monoxide (CO)
  • Testing range: 1 – 2000 ppm
  • Minimum testing points: 6 points

Your assistance and any additional information would be greatly appreciated.

Thank you for your time, and I look forward to your response.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Thermal Cycling and Outgassing Testing in Egypt

Enquiry:

I hope you are doing well. I am reaching out to inquire whether your facility offers thermal cycling and outgassing testing for Laser Module.

I have attached a document detailing the test procedure and requirements. Kindly review it and provide the following information:

  1. Feasibility – Can your facility conduct this test?
  2. Pricing – Estimated cost for performing the test.
  3. Lead Time – How long would it take to complete?
  4. Sample Preparation – Any specific requirements we should be aware of?
  5. Test Report Format – What kind of data will be included in the final report?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Pipe Grade Testing, inspection in Kuwait

Enquiry:

We are pleased to invite you to offer your most competitive offer for conducting the inspection of the below mentioned pipe (9Pcs) to identify the pipe grade (Grade X52)

PMI (Optical emission spectroscopy or any other ) to confirm actual material Grades for chemical composition identification.

PIPE,METALLIC, LINE, ASME B36.10 / API 5L, CARBON STEEL, API 5L GRADE X52, SAW(LONGITUDINAL-SINGLE SEAM), BEVELLED, MTC REQUIRED, NACE MR0175/ ISO15156, 0.625 INCH, 40 FT, 30 INCH, PSL 2 – ANNEXURE H, SOUR

PIPE: 30 INCH, WT.: 0.625″ (SCH. 30)

TYPE: SAW (LONGITUDINAL-SINGLE SEAM)

MATERIAL: CARBON STEEL, API 5L GR. X-52 (PSL-2)

LENGTH: 40 FT

END PREPARATION: BEVELLED

DIMENSIONAL STANDARD: ASME B36.10


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Salt Testing in Oman

Enquiry:

Could you provide quotation for salt analysis of parameters below 

Alkalinity as CaCO3

Aluminium

Antimony

Appearance

Arsenic

Barium

Boron

Bromate

Bromide

Cadmium

Cobalt

Iron

Lead

Magnesium 

Mercury

Moisture content

Molybdenum

Nickel

Nitrite

Titanium

Potassium

Selenium

Sodium chloride as NaCl

Strontium

Sulphate

Water insoluble matter

Zinc

Silicon

Amonium

Vanadium

Copper

Thickness

Iodine as iodate

Dimensions 

Weight


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].