Enquiry:
We have client in Yanbu requesting calibration of Flow Meter as per below details. Kindly share your Offer and confirm if you have Workshop in Yanbu area.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are currently tender a project in Oman and are looking for the below services:
Do advise if you are offer us a quotation for the above mentioned services.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Project : Calibration Services Multiple Items
Company : Omani
We have a requirement for the below mentioned items request you to send your quotes complete commercial terms & Conditions on or before ____________
| Sl No. | Item Description | Range&Make | UOM | Qty |
| 1 | Steel Tape | 0-30 Mtr, Stanley | No | 1 |
| 2 | steel tape | 0-100Mtr, Fiscp pacer | No | 1 |
| 3 | Steel Rule | 600mm, Lobster | No | 1 |
| 4 | Vernier Caliper | 0-300 mm, Mitutoyo | No | 1 |
| 5 | Vernier Caliper | 0-150 mm, Mitutoyo | No | 1 |
| 6 | Digital Vernier Caliper | 0-300mm, CD-12″PSX / Mitutoyo | No | 1 |
| 7 | Outside Micrometer | 0-25 mm, Mitutoyo | No | 1 |
| 8 | Outside Micrometer | 25-50 mm, Mitutoyo | No | 1 |
| 9 | Outside Micrometer | 50-75mm, Mitutoyo | No | 1 |
| 10 | Inside Micrometer (Stick) | 60-300 mm, Mitutoyo | No | 1 |
| 11 | Sprit Level | 0-300 mm, Stanley | No | 1 |
| 12 | Sprit Level | 1 Meter, Stanley | No | 1 |
| 13 | Sprit Level | 2 Meter, Stanley | No | 1 |
| 14 | Total station (Thedolite) | Distance Range: 1 prism-3,000m, 3 prisms-4,000m, 9 prisms-5,000m, Topcon / GTS-235NLP | No | 1 |
| 15 | Auto level | Working Range : ±15ft., Topcon / | No | 1 |
| 16 | Master level | 0-20mm/m, INSIZE | No | 1 |
| 17 | Bore gauge | 18-35mm, Mitutoyo | No | 1 |
| 18 | Bore gauge | 0.01mm to 0-3mm, Mitutoyo | No | 1 |
| 19 | Bevel Protector | 0-90mm, Mitutoyo | No | 1 |
| 20 | Hight gauge | 0-18inch, Mitutoyo / HS-18 | No | 1 |
| 21 | Ultrasonic Thickness Gauge | 0.63-500 mm, 204 / Elcometer | No | 1 |
| 22 | Weld Purge Monitor (Oxygen Monitor) | 0 to 20.9% of oxygen concentration, 100 SC / Tag | No | 1 |
| 23 | Dew Point Meter | -20°C to 80°C & 0 to 100% RH, G319 / Elcometer | No | 1 |
| 24 | Dial Thickness Gauge | 0-5 mm, 124 / Elcometer | No | 1 |
| 25 | Coating Thickness Gauge | 0-15000 µm, 456 / Elcometer | No | 1 |
| 26 | Surface Profile Gauge | 0-5 mm, E124-3M Elcometer | No | 1 |
| 27 | Roughness Meter | 0.5mm/s – 2.900 µm, Mitutoyo | No | 1 |
| 28 | Coating thickness gauage | 0-1500 µm, Elcometer | No | 1 |
| 29 | Dew point calculator | 0-50mm, Elcometer 114 | No | 1 |
| 30 | Probe | 3.5 X10, GE | No | 1 |
| 31 | Probe | 70°, GE | No | 1 |
| 32 | UT Probes | 70° -1, 60° -2, 45°-2, 4MHZ DIA10-1 , – | No | 6 |
| 33 | UT V1 -Calibration Block | 60°-80°, EECI | No | 1 |
| 34 | UT V2 -Calibration Block | 40°-60°, EECI | No | 1 |
| 35 | UT Machine | , GE USM 35 | No | 1 |
| 36 | Magnetic Yoke | 0-4.5 Kg, GAMMATEC | No | 1 |
| 37 | Magnetic Yoke | 0-18 Kg, – | No | 1 |
| 38 | Laser Thermometer | 0.25m to 2m, Elcometer /214 | No | 1 |
| 39 | Portable welding electrode oven | 50-150°C, TECHWELD | No | 10 |
| 40 | Baking oven for welding electrode | 500°C, WELDRY 500 | No | 1 |
| 41 | Holding oven for welding electrode | 370°C, WELDRY 370 | No | 1 |
| 42 | Weghing machine 300Kg | 300Kg, | No | 1 |
| 43 | Torque wrenge 600-3000 Nm | 600-3000 Nm, BRITOOL | No | 1 |
| 44 | Torque wrenge 480-940 Nm | 480-940 Nm, BRITOOL | No | 1 |
| 45 | Torque wrenge 12-68 Nm | 12-68 Nm, BRITOOL | No | 1 |
| 46 | Torque wrenge 25-135 Nm | 25-135 NM, BRITOOL | No | 1 |
| 47 | Torque wrenge 65-450 Nm | 65-450 Nm, BRITOOL | No | 1 |
| 48 | Stantard Type Digital indicator | 0 to 01mm, Mitutoyo | No | 1 |
| 49 | Welding gauge | 0-20mm, INSIZE | No | 1 |
| 50 | HI LO gauge | 0-25mm, INSIZE | No | 1 |
| 51 | Taper gauge | 0 to 15mm, SRWET | No | 1 |
| 52 | Hygrometer thermo clock | , Terminator | No | 1 |
| 53 | Pressure gauge | 0-21 bar, VIKA | No | 1 |
| 54 | Pressure gauge | 0-25 bar, VIKA | No | 1 |
| 55 | Ac / Dc clamp meter | , Kew Snap 2003A / Kyoritsu | No | 1 |
| 56 | Insulation continuity tester | , 3005A / Kyoritsu | No | 1 |
| 57 | High voltage Insulation tester | , 3125 / Kyoritsu | No | 1 |
| 58 | Digital earth tester | , 4105A / Kyoritsu | No | 1 |
| 59 | Precesion right angle | 12″, Moore wright | No | 1 |
| 60 | Precesion right angle | 12″, Moore wright | No | 1 |
| 61 | Right angle | 24″, Stanley | No | 1 |
| 62 | FEELER GAUGE | 0.05-1MM, Mitutoyo | No | 1 |
| 63 | C-CLAMP | No | 4 |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are looking for a lab that can calibrate mass flow meters (lab shall be ISO certified (ISO 17025))
Please find enclosed datasheet showing range of the mass flow meter.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We have an urgent request to calibrate below items, would you be able to let us know your capability and to quote us as soon as possible?
| ASSB number | Sub Name | TOOLS /EQUIPMENT | MANUFACTURER | MODEL/TYPE | SERIAL NO | RANGE | RESOLUTION |
| SCHMETZ | High Vacuum Transducer | Edwards | |||||
| SYSTERM | High Vacuum Transducer | IONIVAC |
| ASSB number | Sub Name | TOOLS /EQUIPMENT | MANUFACTURER | MODEL/TYPE | SERIAL NO | RANGE | RESOLUTION |
| Wheelabrator | Flowmeter | Wheelabrator |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We respectfully request your company to provide us a quote to Brunei or ex-work your location.
The calibration of the equipment below:
Refer to attached word file for more details.
One of our highly proficient and ISO certified laboratory would be taking over this testing.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Kindly send me quote for 5 diesel flow meter calibration.
One of our highly proficient and ISO certified laboratory would be taking over this testing.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Kindly share the quotation for the below items for calibration & certification. If any technical clarification contact :
One of our highly proficient and ISO certified laboratory would be taking over this testing.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We have the attached flowmeter calibration requirements at Rotterdam.
Appreciate your availability and quote for the same.
2. Auxiliary engines fuel oil flowmeter
NOTE: Both flowmeters operating on VLSFO & LSMGO as per regulatory requirements.
3. Aux Boiler Flowmeters.
One of our highly proficient and ISO certified laboratory would be taking over this Calilbration.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].