Accredited Test Labs Inspection, Testing, Calibration Services.

Glass Transition Temp Tg Testing by DSC in Iraq

Posted by: Chemist Posted on: September 7, 2026

Enquiry:

I would like to inquire whether your laboratory provides Glass Transition Temperature (Tg) testing by Differential Scanning Calorimetry (DSC) in accordance with ISO 11357-2 or an equivalent method.

As per our project specification, the Tg test is required to determine the degree of curing of the resin. The specification requires that the measured Tg shall be more than 30°C above the maximum design temperature. Our maximum design temperature is less than 100°C.

Could you please confirm whether your laboratory is capable of performing this test as per the above requirement?

Additionally, kindly provide your technical datasheet for the DSC equipment, including the applicable testing range, sample requirements, and other relevant technical details.

Looking forward to your response.

Note: If your laboratory is not capable of conducting this testing, please let us know if you can recommend or provide the contact details of another laboratory in Iraq, preferably in Basra or elsewhere in Iraq, that is capable of performing the required testing.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Tempered Glass Testing in Dubai, UAE

Posted by: Chemist Posted on: August 19, 2026

Enquiry:

We are looking for Tempered Glass (6mm thick) testing in UAE, and the list of tests as listed in the attached manufacturer test reports.

Could you please check the availability of testing facility and send us your Quote accordingly for 1 test.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Solid Slag Sample Testing in Ibra, Oman

Posted by: Chemist Posted on: July 22, 2026

Enquiry:

Could you please provide a quotation for the following analyses? We would also appreciate it if you could specify the analytical methods that will be used for each test.

1. Total Metals – Elemental Composition (mg/kg)

Purpose: Quantify all valuable and hazardous metals present in the solid slag.

Preferred Methods:

• Sample Preparation: Acid digestion using USEPA 3050B, 3051A, or

3052 (or an equivalent ISO method).

• Instrumental Analysis: ICP-OES or ICP-MS.

• Reporting Units: mg/kg (ppm).

Elements to be analyzed:

• Valuable metals: Copper (Cu), Nickel (Ni), Cobalt (Co), Manganese

(Mn), Zinc (Zn)

• Hazardous metals: Lead (Pb), Mercury (Hg), Antimony (Sb), Arsenic

(As)

• Matrix elements: Iron (Fe), Aluminum (Al), Silicon (Si), Calcium

(Ca), Magnesium (Mg), Chromium (Cr)

2. Bulk Matrix Composition

Purpose: Determine the oxide and mineral composition of the slag for processing and recovery assessment.

Preferred Methods:

• X-ray Fluorescence (XRF): Full oxide composition (e.g., SiO₂,

Fe₂O₃, Al₂O₃, CaO, MgO, etc.)

• Loss on Ignition (LOI): Determination of volatile content

3. Environmental Hazard Characterization – Leachability

Purpose: Assess the potential for metal leaching into the environment.

Preferred Methods:

• TCLP Leaching Test: USEPA Method 1311 (or equivalent)

• Leachate Analysis: ICP-OES or ICP-MS

• Reporting Units: mg/L

Elements to be analyzed in the leachate:

Lead (Pb), Mercury (Hg), Arsenic (As), Antimony (Sb), Copper (Cu), Nickel (Ni), Zinc (Zn), Manganese (Mn), Cobalt (Co), Chromium (Cr), and Cadmium (Cd).

4. Reporting Requirements

Please include the following with the analytical report:

• Certificates of Analysis (COA)

• Detection limits for each analyte

• Full analytical method references

• QA/QC documentation

• Estimated turnaround time

• Confirmation that all methods are accredited under ISO/IEC 17025

(or an equivalent accreditation)

We would appreciate it if you could also indicate whether all of the above analyses can be performed in your laboratory. If any tests are unavailable, kindly specify which ones.

Thank you for your assistance. I look forward to your reply.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Metal Strips Testing SEM/EBSD in Europe

Posted by: Chemist Posted on: May 19, 2026 Bruges

Enquiry:

Je me permets de vous contacter pour savoir si vous avez le possibilite faire d’analyse SEM/EBSD sur feuillards metalliques est si cette méthode est certifiée selon norme ISO 17025.

I am contacting you to inquire whether you have the possibility of performing SEM/EBSD analysis on metal strips and whether this method is certified according to ISO 17025.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Spectrophotometric Lab Testing in Kuwait

Posted by: Chemist Posted on: May 12, 2026

Enquiry:

We are interested in a service that you may possibly provide.

We would like a lab test by means of spectrophotometry to determine the color coordinates of the low-iron back-painted glass panel in comparison with the sample.

Is this something you could help us with?

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Molten Zinc Analysis in Jubail, KSA

Posted by: Chemist Posted on: May 10, 2026

Enquiry:

We would like to request your urgent quotation for Molten Zinc Chemical Analysis as per

our approved Purchase Requisition for our Galvanizing Plant Quality Control requirements.

Service Details

Service: Molten Zinc Analysis
Description: Chemical analysis of molten zinc bath
Quantity: 1 Set
Frequency: Monthly (May 2026)
Department: QC – Galvanizing
Client / Facility: Al‑Jubail

Scope of Analysis

Kindly confirm analysis covering (but not limited to):

Zn %
Al %
Fe %
Pb %
Other trace elements as per galvanizing standards

Kindly Include in Your Quotation

Price per analysis (set)
Test method / standard followed (ASTM / ISO, etc.)
Turnaround time for results : Immediately
Validity of quotation
Payment terms : As per Agreed Vendor Payment Terms
Sample submission requirements
Accreditation details (if available)
Quotation reference number

⚠️ This RFQ is urgent as it supports ongoing galvanizing quality control activities.
We would appreciate receiving your best quotation and earliest turnaround time at the soonest possible.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Plastic Film Packaging Testing in Egypt

Posted by: Chemist Posted on: November 25, 2025

Enquiry:

our company is specialized in printing and lamination for plastic films , kindly advise what are the accredited testing labs for making analysis for our printed packaging film PET 12µ / 18µ OPP Milky
below is a list of the required analysis and tests needed :

*6.2.1. OVERALL MIGRATION LIMITS (OML)*
	Parameter	Standard	Test Method
	Using Food Simulant E: Poly(2,6-diphenyl-p-phenylene oxide), particle size 60-80 mesh, pore size 200 nm	<10 mg/dm2 -or- <60 mg/kg	ES 6947-1/2009 EN 1186-1:2002





*6.2.2. SPECIFIC MIGRATION LIMITS (SML)*
	Parameter	Standard	Test Method
	Total Primary Aromatic Amines (PAA)	≤0.01 mg/kg Food	1796/2007
	Octadecyl 3-(3,5-di-tert-butyl- 4-hydroxyphenyl) propionate	≤6 mg/kg Food	HPLC
	N,N-bis(2 hydroxyethyl) alkyl(C8-C18) amine and amine hydrochlorides	≤1.2 mg/kg Food expressed as N,N-bis (2-hydroxyethyl) alkyl(C8-C18) amine	HPLC
	Terephthalic acid (PTA)	≤7.5 mg/kg Food
	Isophthalic acid (IPA)	≤5 mg/kg Food
	Ethylene glycol (EG) (Alone or with diethylene glycol or stearic acid esters of ethylene glycol)	≤30 mg/kg Food
	Diethylene glycol (DEG) (Alone or with diethylene glycol or stearic acid esters of ethylene glycol)	≤30 mg/kg Food
	Antimony trioxide (expressed as antimony)	≤0.04 mg/kg Food

*6.2.3. METALS MIGRATION LIMITS*

	Parameter	Standard	Test Method
	Barium (Ba)	≤1 mg/kg Food	HPLC
	Cobalt (Co)	≤0.05 mg/kg Food
	Copper (Cu)	≤5 mg/kg Food
	Iron (Fe)	≤48 mg/kg Food
	Lithium (Li)	≤0.6 mg/kg Food
	Manganese (Mn)	≤0.6 mg/kg Food
	Zinc (Zn)	≤10 mg/kg Food

*6.3. HEAVY METALS*

	Parameter	Standard	Test Method
	Cadmium (Cd)	Sum ≤ 100 mg/kg Food	HPLC
	Lead (Pb)
	Mercury (Hg)
	Chromium (Cr VI)

*6.4. OTHER CONTAMINANTS*

	Parameter	Standard	Test Method
	Acrylonitrile	≤0.001 mg/kg	ES 4245/2008
	Total Solvents	≤5 mg/cm2 of package surface
	Ink Stability	Pass Test

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lime Slag Metals Testing in Sohar, Oman

Posted by: Chemist Posted on: October 9, 2025

Enquiry:

Allow me to briefly introduce our company based in Sohar Free Zone, Oman. We are engaged in the manufacturing of Low Carbon Ferro Chrome, a key alloy used in the production of stainless steel and other specialty steels. Low Carbon Ferro Chrome is valued for its ability to add chromium to steel without raising the carbon content significantly, making it essential in the production of corrosion-resistant and high-strength materials.

As part of our production process, we generate a by-product in the form of Lime Slag. We are currently looking to test this slag for heavy metal content using the Toxicity Characteristic Leaching Procedure (TCLP) to determine whether the material is classified as hazardous or non-hazardous.

The TCLP test should analyze for the presence of the following elements:

Arsenic (As)
Barium (Ba)
Cadmium (Cd)
Chromium (Cr)
Lead (Pb)
Mercury (Hg)
Selenium (Se)
Silver (Ag)
Nickel (Ni)
Copper (Cu)
Zinc (Zn)
Iron (Fe)
Manganese (Mn)
Molybdenum (Mo)
Aluminum (Al)

As per industry standards, the testing must be conducted in accredited environmental laboratories that perform TCLP analysis in accordance with U.S. EPA Method 1311.

We would appreciate it if you could guide us on whether your facility or associated labs are equipped to perform this analysis, and if so, kindly share the procedure, lead time, and associated costs.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Glass Samples Oxides Testing in Dubai, UAE

Posted by: Chemist Posted on: September 24, 2025

Enquiry:

Please note that we are having a weekly testing requirement for below oxides in our glass samples

We need glass analysis along with glass properties in below format.

OXIDES

SIO2

Al2O3

Fe2O3

Na2O

K2O

MgO

CaO

SO3

BaO

Cr2O3

TiO2

SrO

(R2O3)

(RO)

(R2O)

PROPERTIES

LOG 2

LOG 3

LOG 7

SOFTENING POINT

ANNEALING POINT

THERMAL EXP

COOLING TIME

DENSITY

LIQUIDUS TEMP.

USPXX

RMS

Sample of the glass will be provided upon getting price confirmation.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chemical and Mechanical Testing in Sohar, Oman

Posted by: Chemist Posted on: September 24, 2025

Enquiry:

Please send us your offer for the following materials Lab testing.

1. Lab Test – Chemical analysis of steel plate 40mm thk x 300×300 mm as per SA 537 CL.1 – 1 No.

2. Lab Test –Mechanical test steel plate 40mm thk x 300×300 mm as per SA 537 CL.1 – 1 No.

(a. Impact test @-38 deg c b. Vicker Hardness c. Tensile Test)

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].