Enquiries about inspection, testing, calibration and product purchases.
Enquiry:
We would like to have your support to get analyze crude oil samples for Salt content in your esteemed Laboratory.
Can you please provide us analyses cost, sample volume and turnaround time. Appreciate your quick response.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Re-labelling, Destuffing, Restuffing Survey of Container Shipment
Request to please quote your best for the below scope.
We are planning container De-stuff and re-stuffing of 4x20GP the existing labelling is incorrect & requires necessary changes.
Inspection Scope :
| Batch | QTY | UOM | Container stuffing details |
| 9 | IBC | 9 Pallets in Container# | |
| 18 | IBC | 9 Pallets in Container# + 9 Pallets in Container# | |
| 18 | IBC | 9 Pallets in Container# + 9 Pallets in Container# | |
| 80 | Drums | 20 Pallets in Container# |
———-
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Kindly quote your best rates for the following test at Gulshan-e-Iqbal, Karachi on Urgent basis.
1. Gaseous Emission Tesing of Hovel Boiler1 Particulate Matter (By using 0.45 u filter paper)2 Sulphur Dioxide (SOz)3 Oxides of Nitrogen (NOx)Carbon Monoxide (CO)
2. Gaseous Emission Test (Chiller)Particulate Matter (By using 0.45 u filter paper)Sulphur Dioxide (SOz)Oxides of Nitrogen (NOx)Carbon Monoxide (CO)
3. Noise Level Testing of Blow Molding MachinesNoise Level Testing per point
4. Waste Water TestingEffluent FlowTemperature Free of Cost pHBiochemical Oxygen Demand (BODs) 2,500Chemical Oxygen Demand (COD) 2,5O0Total Suspended Solids (TSS) 700Total Dissolved Solids (TDS) 700Grease & Oil 800Chloride (Cl) 700Phenolic Compound
5. Vehicle Emission Testing (Diesel Fork Lifters)Carbon Monoxide (CO)Smoke PointNoise
6. Vehicle Emission Testing (Toyota Hilux)Carbon Monoxide (CO)Smoke PointNoise
7. Vehicle Emission Testing (Toyota Vigo)Carbon Monoxide (CO)Smoke PointNoise
8. Granulator Room Noise TestNoise Level per point
9. Drinking Water Test.Bacteriological Analysis1 Total Coliform, Fecal Coliform, Escherichia Coli (E-Coli)2 Physical(i) Color(ii) Taste(iii) Adour(iv) Turbidity, NTU(v) Total Hardness as CaCO 3(vi) Total Dissolved Solids (TDS)(vii) pH3 Chemical
10. Soil Sample Testing1. pH Value L,70A2. Grease & Oil 2,5003. Arsenic (As) 6,6004. Barium (Ba) 4,8005. Cadmium (Cd) 4,8006. Chromium (Cr) 4,8007. Lead (Pb) 4,8008. Zinc (Zn) 4,8009. Silver (Ag) 4,80010.Selenium (Se) 4,80011. Mercury (Hg) 6,50012
11. Noise Testing of Diesel Fire Engine
12. Noise Testing of Boiler Room
13. Gaseous Emission of Diesel Fire Engine
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We would like to conduct a drinking water quality test for our office. Kindly provide your quotation for the water quality analysis covering the parameters listed below:
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We would like to request your urgent quotation for Molten Zinc Chemical Analysis as per
our approved Purchase Requisition for our Galvanizing Plant Quality Control requirements.
Service Details
Scope of Analysis
Kindly confirm analysis covering (but not limited to):
Kindly Include in Your Quotation
⚠️ This RFQ is urgent as it supports ongoing galvanizing quality control activities.
We would appreciate receiving your best quotation and earliest turnaround time at the soonest possible.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I’m reaching out because we need to get some laboratory testing done on our liquid fertilizers to meet the current Saudi MEWA requirements.
Could you let me know if your lab can handle the following tests and what the charges would be for each?
1. Trace Elements (TE) & Physicals:
As shown in image Attached, we need a full analysis covering Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Nickel (Ni), and Chromium (CrVI). We also need levels for Selenium (Se), Sodium (Na), Chloride (Cl), and pH.
2. Radioactive Elements:
As per image attached, we require testing for Uranium-238 (U-238), Radium-226 (Ra-226), Potassium-40 (40-K), and Thorium-232 (Th-232).
Please share your price list for these specific parameters and let us know the typical turnaround time for the results. If there are any specific sample volume requirements for liquid fertilizers, just let me know.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Further to our discussion, please kindly confirm the possibility and quote us the costs for carrying out below tests on VISCO Elastic Coating as per ISO-21089-3 -2016. We need itemized costs and prices for each so we negotiate with our client and get final approval.
| item | Test | Standard |
| 1 | Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 28 days, Temperature: 23 °C | ISO-21809-3 |
| 2 | Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 28 days, Temperature: 80 °C | ISO-21809-3 |
| 3 | Cathodic Disbondment ISO 21809-3, Annex G Voltage: -1500 mV vs SCE Duration: 48 hours , Temperature: 65 °C | ISO-21809-3 |
| 4 | Indentation Resistance ISO 21809-3 Annx E @ 23°C | ISO-21809-3 |
| 5 | Peel Adhesion ISO 21809-3, Annex H @ 23°C to steel and plant coating | ISO-21809-3 |
| 6 | Indentation Resistance ISO 21809-3 Annx E @ 80°C | ISO-21809-3 |
| 7 | Peel Adhesion ISO 21809-3, Annex H @ 80°C to steel and plant coating | ISO-21809-3 |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Testing of Diesel Quality
Please Share quotation for testing of diesel quality if its compliant with ADNOC STANDARD
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We would like to request your support for testing a water sample intended for use in mixing refractory castable material for our Project, at Botlek, theemsweg Rotterdam.
The following tests are required for the water sample as per API 936 requirement.
Kindly confirm:
Once confirmed, we will arrange for submission of the water sample at the earliest.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Could you please let me know the process and testing cost for minimum the following items to make sure those are in compliance with environmental regulations and safety standards settled by Sharjah Municipality. Consider top priority and contact the undersigned for any further queries / site visit.
The purpose of the testing is to renew the company license & apply ISO.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].