• Home
  • Archive by category "Enquiries"

Category: Enquiries

Enquiries about inspection, testing, calibration and product purchases.

Hydrostatic Testing of Steel Pipes Yas Island, UAE

Posted by: Chemist Posted on: July 23, 2026

Enquiry:

We are currently bidding for a new project “ CONSTRUCTION SERVICES FOR WATER SUPPLY TO SIR BANI YAS ISLAND IN WESTERN REGION“ and invite your esteemed company to submit your techno-commercial quotation for the attached  “PIPE HYDROSTATIC TESTING”. Please find below the attached RFQ document for your kind review.

We kindly request you to submit your best competitive offer on or before 22ND JULY 2026. Your prompt response and support in expediting this process will be highly appreciated. if any query you can contact the undersigned through telecon Mob :______ email.  In case any Scope of Work falls outside your scope of services, you may exclude the same and submit your proposal for the relevant scope only.

Please acknowledge the receipt of the documents and confirm expression to quote by return mail by today.

Project details:

Tender Project Name –         CONSTRUCTION SERVICES FOR WATER SUPPLY TO SIR BANI YAS ISLAND IN WESTERN REGION

Client –                                         ______

Project Duration –                   24 months

Project Location –                   Jabel Dhanna, Abu Dhabi

Project Scope of WorkThe scope of work entails the infrastructure Works package for Pipeline works

Attachment :

  1. BOQ
  2. Terms & condition

Key Commercial Terms:

1Type of ContractHYDROSTATIC TESTING
2Scope of Work“PIPE HYDROSTATIC TESTING” as per the attached BOQ, Specification and Drawings
3Delivery/ Completion Time PeriodThe work shall start as per the mutually agreed schedule during the finalization of the contract.
4Price TermsThe price shall include all cost including as mentioned in the Technical specification.
5Performance BondPerformance Bank Guarantee for 10% of Contract value to be submitted. Refer the detailed “Subcontract terms & condition” enclosed.
6Payment termsPayment shall be made within 60 days from the payment certificate after recovering the advance if any. If any Advance Payment required , Max 10% against advance Bank Guarantee
7EscalationFirm & Fixed for the contract period
8Retention money10% retention will be deducted from each bill.
9Defect Liability period12 months from the date of successful completion of the project.
10Liquidated DamagesIn case job is not completed as per schedule agreed, LD will be applicable as 1% of order value per week, up to max 10% of order value.
11Validity of OfferOffer shall minimum valid for 120 days from the date of offer
12InsuranceIn Seller Scope. Refer the attached “Subcontract Agreement” enclosed.
13Taxes & DutiesAs per UAE tax law
14ComplianceAs per company

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Oil DGA, Ageing, Furans Testing in Lahore, Pakistan

Posted by: Chemist Posted on: July 23, 2026

Enquiry:

We are currently preparing a commercial offer for our client, covering a 2-year transformer oil analysis contract by a foreign laboratory, we’d like to request a quotation directly from your team.

Scope of testing required:

1. Transformer Oil DGA Analysis (as per IEC 60567/60599) – 20 samples

2. Transformer Oil Ageing – Acidity, BDV, DDF (as per IEC standard) – 20 samples

3. Transformer Oil Paper Ageing – Furans & Methanol (as per IEC standard) – 14 samples

Additional scope requirements:

– 50% of samples tested in Year 1, remaining 50% in Year 2

– Supplier to provide sampling kits to our site team

– Supplier to arrange/advise on dispatch logistics of oil samples from Pakistan site to your nearest UAE facility

– A comprehensive technical report per batch, including interpretation of results, condition assessment, comparison against historical/online DGA data, and clear recommendations for corrective/preventive action

The 10 transformers involved are ___ and unit auxiliary transformers (220kV/22kV and 220kV/18.5kV/11kV class); full equipment list available on request.

Could you please share, or point us to the right regional contact for:

– Per-sample pricing for each test category

– Sampling kit cost (if chargeable)

– Estimated freight/logistics cost and lead time from Pakistan to your UAE facility

– Typical turnaround time per batch

– ISO/IEC 17025 accreditation scope covering these tests

Our submission deadline is 27 July 2026, so we would greatly appreciate a prompt response, ideally within 3-4 working days.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Diesel Bug DIP Slides Box of 10, Khobar, KSA

Posted by: Chemist Posted on: July 22, 2026

Enquiry:

With reference to the mentioned subject, we are requesting you to provide quotation from the below details.

Line NoItem DescriptionQuantityUoM
1DIESEL BUG DIP SLIDES TESTS (BOX OF 10) FUEL FILTER BACTERIA TEST (DIP SLIDES) MANUFACTURER: CMT (CM TECHNOLOGIES) PART NO.: OTK-CT-11006 PACK: 10 TESTS FOR DETECTION OF DIESEL BUG (BACTERIA, YEASTS AND MOULDS) IN MARINE DIESEL FUEL / MGO, SUITABLE FOR CLOGGED FUEL FILTERS. PART NO. OTK-CT-11006 MAKER : CM TECHNOLOGIES4BX

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Storage Tank Civil Defence Certification

Posted by: Chemist Posted on: July 22, 2026

Tanks Inspection, Strapping, Certifications

If you’re looking for storage tank calibration and Civil Defense certification, the requirements depend on the country, since Civil Defense authorities have different regulations. We at AccreditedTestLabs.com serve worldwide to facilitate with all local standards and specifications included but not limited to API MPMS Chapter 2, ISO 7507 series, and OIML R71 etc.

In many jurisdictions, the process typically involves:

  1. Storage tank calibration
    • Measuring the tank’s capacity accurately.
    • Producing a calibration (strapping) table showing volume versus liquid level.
    • Performed using recognized standards (such as ISO, API, or OIML methods).
    • Usually carried out by an accredited calibration company.
  2. Inspection
    • Verification of tank dimensions, construction, and condition.
    • Inspection of overfill protection, vents, gauges, and safety equipment if applicable.
  3. Certification
    • The calibration company issues a calibration certificate and calibration tables.
    • If required by local regulations, the documents are submitted to the relevant Civil Defense or fire safety authority as part of the facility approval or renewal process.
  4. Civil Defense approval
    • Civil Defense generally reviews fire and life safety compliance rather than performing the calibration itself.
    • Approval may require:
      • Calibration certificate
      • Tank drawings
      • Inspection reports
      • Fire protection system documentation
      • Site layout and emergency plans

Could you tell us which country you are referring to (for example, UAE, Saudi Arabia, Qatar, Oman, Bahrain, Pakistan, Egypt, America, Rotterdam, or another country)? The specific Civil Defense certification requirements vary by jurisdiction.

Storage Tanks Calibration, Civil Defense Certification

Solid Slag Sample Testing in Ibra, Oman

Posted by: Chemist Posted on: July 22, 2026

Enquiry:

Could you please provide a quotation for the following analyses? We would also appreciate it if you could specify the analytical methods that will be used for each test.

1. Total Metals – Elemental Composition (mg/kg)

Purpose: Quantify all valuable and hazardous metals present in the solid slag.

Preferred Methods:

•              Sample Preparation: Acid digestion using USEPA 3050B, 3051A, or

3052 (or an equivalent ISO method).

•              Instrumental Analysis: ICP-OES or ICP-MS.

•              Reporting Units: mg/kg (ppm).

Elements to be analyzed:

•              Valuable metals: Copper (Cu), Nickel (Ni), Cobalt (Co), Manganese

(Mn), Zinc (Zn)

•              Hazardous metals: Lead (Pb), Mercury (Hg), Antimony (Sb), Arsenic

(As)

•              Matrix elements: Iron (Fe), Aluminum (Al), Silicon (Si), Calcium

(Ca), Magnesium (Mg), Chromium (Cr)

2. Bulk Matrix Composition

Purpose: Determine the oxide and mineral composition of the slag for processing and recovery assessment.

Preferred Methods:

•              X-ray Fluorescence (XRF): Full oxide composition (e.g., SiO₂,

Fe₂O₃, Al₂O₃, CaO, MgO, etc.)

•              Loss on Ignition (LOI): Determination of volatile content

3. Environmental Hazard Characterization – Leachability

Purpose: Assess the potential for metal leaching into the environment.

Preferred Methods:

•              TCLP Leaching Test: USEPA Method 1311 (or equivalent)

•              Leachate Analysis: ICP-OES or ICP-MS

•              Reporting Units: mg/L

Elements to be analyzed in the leachate:

Lead (Pb), Mercury (Hg), Arsenic (As), Antimony (Sb), Copper (Cu), Nickel (Ni), Zinc (Zn), Manganese (Mn), Cobalt (Co), Chromium (Cr), and Cadmium (Cd).

4. Reporting Requirements

Please include the following with the analytical report:

•              Certificates of Analysis (COA)

•              Detection limits for each analyte

•              Full analytical method references

•              QA/QC documentation

•              Estimated turnaround time

•              Confirmation that all methods are accredited under ISO/IEC 17025

(or an equivalent accreditation)

We would appreciate it if you could also indicate whether all of the above analyses can be performed in your laboratory. If any tests are unavailable, kindly specify which ones.

Thank you for your assistance. I look forward to your reply.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Industrial Environmental Testing in Karachi, Pakistan

Posted by: Chemist Posted on: July 21, 2026

Enquiry:

Kindly let us have quotation for environmental testing service for our company. We are in inks production business a joint venture of Printing corporation.

The required tests details are attached.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lubricity Test in Turkey

Posted by: Chemist Posted on: July 20, 2026

Enquiry:

We need to conduct a lubricity test on our Lube in a salt-saturated

(NaCl) polymer mud system, both with and without the Lube, and evaluate performance before and after aging (Including Rheological

parameters) . The detailed mud formulation will be provided separately.

In addition, we require foaming and cheese tests to assess the product’s performance in this system

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing Annual Contract Dammam, Jubail, Aziziya, KSA

Posted by: Chemist Posted on: July 20, 2026

Enquiry:

Request for Quotation – Annual Water Testing Services

We have a requirement for annual water quality testing services in Aziziya, Dammam, and Jubail.

The scope includes:

•              Monthly sampling for treated water and swimming pool water (where

applicable).

•              Separate Microbiological (Bacterial) and Chemical analyses.

•              Total requirement: 60 sampling events per year (36 for Aziziya, 12

for Dammam, and 12 for Jubail).

Kindly provide your best quotation for this requirement, including:

•              Unit rates for Microbiological (Bacterial) Analysis

•              Unit rates for Chemical Analysis

•              Any sample collection/transportation charges (if applicable)

•              Report turnaround time

•              Validity of the quotation

Please share your quotation at your earliest convenience.

If you require the detailed list of testing parameters, please let us know and we will share the complete scope.

Thank you, and we look forward to your prompt response.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chemical Compatibility Testing Demulsifier Inhibitors Khafji, KSA

Posted by: Chemist Posted on: July 19, 2026

Enquiry:

We are requesting technical and commercial proposals from qualified laboratories to conduct Chemical Compatibility Testing between production Demulsifiers and Corrosion Inhibitors. Our demulsifiers and inhibitors are the following:

  • Corrosion Inhibitors
  1. CRW22051
  2. CRW22529
  • Demulsifiers
  1. DMO22758
  2. PHASETREAT 19745
  3. MC MX 1-6000
  4. Duradem 3901

The objective of this study is to evaluate potential incompatible interactions between these surface-active chemicals to prevent emulsion stabilization, foaming, or degradation of corrosion mitigation efficiency within production facilities.

1. Scope of Work

The selected laboratory will be required to perform the following evaluations using representative fluid samples provided by –:

  1. Physical Compatibility / Blend Testing: Visual assessment of neat chemical blends at varying ratios to check for precipitation, turbidity, or phase separation.
  2. Emulsion Bottle Testing: Bench-scale evaluation at simulated field temperatures to measure water drop rate, interface clarity, and residual BS&W across various chemical dosage matrices.
  3. Corrosion Efficiency Testing: Linear Polarization Resistance (LPR) or Electrochemical Impedance Spectroscopy (EIS) to confirm that the demulsifier does not degrade the protective film efficiency of the corrosion inhibitor.

2. Technical Data & Field Conditions (Approximate)

  1. Fluid Matrix: Crude Oil (~27–28° API), High-Salinity Produced Water
  2. Average Water Cut: 28% to 32%
  3. Operating Temperature: 38°C to 64°C
  4. Chemical Types: MSDS attached.
  • Submission Requirements

Please include the following details in your formal proposal:

  1. Technical Proposal: Detailed testing methodology, equipment specifications, applicable ASTM/NACE standards, and standard fluid volume requirements.
  2. Commercial Proposal: Itemized cost breakdown per test/matrix run and total project cost.
  3. Timeline: Estimated turnaround time from sample receipt to final report delivery.
  4. Qualifications: Key laboratory accreditations (such as ISO 17025) and relevant experience with GCC fluid systems.

We look forward to receiving your proposal.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].