Enquiries about inspection, testing, calibration and product purchases.
Enquiry:
Do you do testing of sludge for CHNOS (Carbon, Hydrogen, Nitrogen, Sulphur and Oxygen) in Malaysia. Can you provide me a quotation for the mentioned parameters.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please check the attached file details about the HDPE and PPR pipes and fittings. We kindly request your best price for the testing service according ISO SASO 15874,ISOSASO 4427.
We are reaching out to inquire about the testing services you provide for PPR and HDPE pipes and fittings. We would appreciate your assistance with the following details:
We aim to ensure our products meet all necessary quality standards and industry requirements, and your expertise will be invaluable.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please note that we provide operation and maintenance services for HFO power plants.
I am reaching out regarding our project for the Power Plants.
We have monthly HFO and lube oil samples that require analysis, and I would like to inquire whether there is a laboratory in Lebanon that can provide this service.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please provide your Best Quotation for Emission Test and Certification for Generator 910 KVA at Yas island, Abu Dhabi.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
You are invited to participate in the above RFQ subject. Please acknowledge the receipt of this mail and submit your quotation before or on the due date.
Thanks in anticipation of your immediate response.
Timeline is as below:
Remarks :
Please provide two offers one for technical and one for commercial
Turbine Oil Parameters list
S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point (COC) D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Demulsibility, min D-1401
12 Air release D – 3427
13 RPVOT D – 2272
14 Viscosity Index (VI) D – 2270
15 Particle count ISO-4406
16 Membrane Patch Colorimetry (MPC) D – 7843
17 LSV Antioxidant (%) D – 7590
18 Wear metals & Contaminants D – 5185
——————-
Fire Resistance Hydraulic Oil Parameters list
S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Resistivity D-1169
12 Air release D – 3427
13 RPVOT D – 2272
14 Chlorine content ISO 15597
15 Particle count ISO-4406
16 Wear metals & Contaminants D – 5185
17 Density D7042
18 Auto Ignition Temperature E-659
19 Mineral oil content D6971
Notes
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are the Modified Bitumen Company, a reputable producer of bitumen products based in Qatar.
We are currently seeking third-party testing for our product, “CRACK SEALANT,” in accordance with ASTM D6690-21 or the latest available version. Please let us know if you can conduct these tests.
We would appreciate receiving a quotation for the costs involved, the lead time for completion, and the procedure for collecting samples.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are in the process of developing a large-scale shrimp project in Oman for local and international markets.
Aquatic Investments Excellence LLC is a JV based in Muscat owned by GTR Royal trading (D42, Dubai) 61% and Fisheries Development Oman 39% (FDO, Oman) to develop a large-scale shrimp farming operation in Sultanate of Oman. The project site is located at Al Jazer, Al Wusta Governorate, 750KM south of Muscat, and 200Km south of Duqm on the coast of Arabian sea covering an estimated area of approximately 8600 hacters. After full commissioning we will be harvesting 220,000 M.ton of P.Vannamei Shrimps each year.
For the above project we are excited to invite bio-test laboratory vendors to submit a proposal for the design, supply and commission of a state-of-the-art laboratory for Aquatic Investments Excellence LLC at Al-Jazir, 200KM South of DUQM. We are looking for a comprehensive solution that includes both the layout design, the necessary laboratory equipment & supplies and commissioning of Bio Laboratory.
Project Overview:
Requirements:
We would appreciate it if you could submit your proposal by 10 February 2025, which includes:
Please feel free to reach out if you have any questions or need further clarification.
We look forward to reviewing your proposal and working with you on this exciting project.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I am with the Institute of Microelectronics. I am reaching out to inquire whether your company offers facilities for testing CO gas sensors.
We have developed a CO gas sensor and are interested in characterizing its performance. Specifically, we would like to conduct testing under different CO concentration levels.
Could you kindly provide a budgetary quotation for sensor characterization, with the following details:
Your assistance and any additional information would be greatly appreciated.
Thank you for your time, and I look forward to your response.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I hope you are doing well. I am reaching out to inquire whether your facility offers thermal cycling and outgassing testing for Laser Module.
I have attached a document detailing the test procedure and requirements. Kindly review it and provide the following information:
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are pleased to invite you to offer your most competitive offer for conducting the inspection of the below mentioned pipe (9Pcs) to identify the pipe grade (Grade X52)
PMI (Optical emission spectroscopy or any other ) to confirm actual material Grades for chemical composition identification.
PIPE,METALLIC, LINE, ASME B36.10 / API 5L, CARBON STEEL, API 5L GRADE X52, SAW(LONGITUDINAL-SINGLE SEAM), BEVELLED, MTC REQUIRED, NACE MR0175/ ISO15156, 0.625 INCH, 40 FT, 30 INCH, PSL 2 – ANNEXURE H, SOUR
PIPE: 30 INCH, WT.: 0.625″ (SCH. 30)
TYPE: SAW (LONGITUDINAL-SINGLE SEAM)
MATERIAL: CARBON STEEL, API 5L GR. X-52 (PSL-2)
LENGTH: 40 FT
END PREPARATION: BEVELLED
DIMENSIONAL STANDARD: ASME B36.10
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].