• Home
  • Archive by category "Saudi Arabia"

Category: Saudi Arabia

Saudi Arabia

Filter Plan Drinking Water Testing in Jubail, KSA

Posted by: Chemist Posted on: October 3, 2026

Enquiry:

We would like to enquire about third-party laboratory testing and approval of drinking water produced from our newly installed water treatment plant at Plant.

The water treatment plant is ready for use; however, prior to using the treated water for drinking purposes, we understand that the water should be tested by an approved/accredited third-party laboratory to verify that it meets the applicable drinking-water quality standards.

Kindly provide us with your quotation and details for the required testing, including:

  • Required water quality tests and parameters
  • Applicable drinking-water standards/specifications
  • Sampling procedure and number of samples required
  • Laboratory accreditation/approval details
  • Testing charges
  • Expected turnaround time for the test report
  • Validity or renewal requirements, if applicable
  • Any certificates or documents required from our side
  •  

Please also advise whether your team can arrange on-site water sampling at Abu Hadriya Camp and issue an official laboratory test report/certificate confirming the suitability of the treated water for drinking purposes.

Kindly submit your commercial offer along with the scope of testing at your earliest convenience.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Asbestos, Mold, and Indoor Air Quality Testing in Jeddah, KSA

Posted by: Chemist Posted on: October 1, 2026

Enquiry:

We are writing to request a formal price quotation for laboratory analysis and sampling services for Asbestos and Mold / Indoor Air Quality (IAQ) for our upcoming project in [Project Location / City].

We would appreciate it if you could provide us with itemized pricing for the following two sampling options:

1. Sampling Option Pricing Breakdown:

  • Option A (On-Site Sampling by Laboratory Technicians): Total cost for sending certified technicians from your team to perform on-site sampling (bulk materials and air cassettes) following standard QA/QC protocols and safety regulations.
  • Option B (Laboratory Testing Only / Client-Delivered Samples): Total cost for laboratory testing and analysis when samples are collected by our team and delivered directly to your laboratory along with a completed Chain of Custody (COC) form.

2. Required Analytical Tests & Methods:

Please provide unit prices for the following specific analyses:

  • Asbestos Testing:
    • Bulk Material Samples: Identification via Polarized Light Microscopy (PLM) (please also indicate TEM pricing if required for confirmation).
    • Air Samples: Airborne fiber concentration analysis via Phase Contrast Microscopy (PCM).
  • Mold & Indoor Air Quality (IAQ) Testing:
    • Airborne Mold Spore Traps: Total spore count and genus identification.
    • Surface / Bulk Samples: Tape lift, swab, or bulk analysis for mold identification.

3. Additional Required Information:

  1. Turnaround Time (TAT): Standard report delivery timeframe and rush/expedited surcharges (e.g., 24-hour / 48-hour TAT).
  2. Accreditation: Confirmation of ISO/IEC 17025 accreditation (and/or National Center for Environmental Compliance – NCEC approval in KSA) for the requested testing methods.
  3. Sampling Supplies: Confirmation whether sampling cassettes, media, and Chain of Custody forms are provided free of charge for Option B.

Please send your formal quotation at your earliest convenience. Feel free to reach out if you require any additional project details to prepare your offer.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Iroko Wood Testing in Jeddah, KSA

Posted by: Chemist Posted on: September 29, 2026

Enquiry:

We would like to conduct testing for Iroko wood treated with a waterborne preservative by pressure treatment, as per AWPA U1.

Kindly confirm if your laboratory can test the preservative retention and penetration and provide us with the testing cost and required sample size.

Please also confirm the expected turnaround time.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Migration Test for Pharma and Food Packing in KSA

Posted by: Chemist Posted on: September 24, 2026

Enquiry:

Can you please send me the final quotation including the Vat% 
only for the below tests for 3 Samples (PE-coated paper – FBB paper – grayback board: 

1- Overall Migration 

2- Specific Migration of Heavy Metals (Pb, Cd, Cr, Hg, As) from articles intended to come in contact

3- Odor Test

with foodstuffs 

showing the report delivery date after receiving the samples please 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Firefighting Foam Quality Testing NFPA in Jeddah, KSA

Posted by: Chemist Posted on: September 21, 2026

Enquiry:

We request your quotation for the following testing requirements:

  1. Firefighting Foam Quality Condition Test (as per NFPA)

Kindly confirm to perform this test, required sample quantity, testing procedure, and lead time.

Please share your techno‑commercial offer at the earliest.

Location-Jeddah KSA

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Hydraulic Oil Testing in Jubail, KSA

Posted by: Chemist Posted on: September 20, 2026

Enquiry:


Service for Hydraulic Oil Laboratory Analysis,
The Oil analysis Parameters are as follows:

  • NAS 1638 Class / ISO 4406: To measure solid particle contamination
    and
    micro-debris.
  • Water Percentage / Moisture Content: To detect dissolved water or
    moisture in the oil.
  • Total Acid Number (TAN): To check for fluid oxidation and acidity
    levels.
  • Kinematic Viscosity @ 40°C: To verify if the oil still retains its
    original ISO VG 68 thickness.
    Total 12 Nos. Samples for Lab Analysis.

P.T. Power pack # 04

Crimping Press

U Press

O Press

U <(>&<)> O Press Auxiliary system

CTW

Expander

Hydro Tester

End Facer # 02

P.T. Power pack # 01

P.T. Power pack # 02

P.T. Power pack # 03

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Central Chilled Water Plant Inspection, Testing in Khobar, KSA

Posted by: Chemist Posted on: September 20, 2026

Enquiry:

We are currently seeking a budgetary quotation for the subject requirement. Please find the attached Scope of Work (SOW) for your review.

Kindly note that the bid closing date and time is 22 September 2026 at 11:00 AM.

SOW:.

1. Purpose
The subcontractor shall perform a complete inspection, testing, and condition
assessment of the Central Chilled Water Plant (CWP) to evaluate the operational
condition of eight (8) water cooled Chillers, each having capacity of 1100 TR and
identify the extent of overhaul, repair, replacement, and maintenance activities
required to restore the plant to reliable and efficient operation.
2. Scope of Services
The subcontractor shall provide all necessary manpower, supervision, tools,
instruments, testing equipment, consumables, transportation, and documentation
required to execute the inspection.

2.1 Plant Survey and Data Collection

2.2 Chillers Inspection

  1. Testing Requirements
  2. Deliverables
    The subcontractor shall submit the following:
    4.1 Inspection Report
    4.2 Overhaul Recommendation Report
    4.3 Final Assessment Matrix
  1. HSE Requirements
  1. Exclusions
  1. Completion

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Samples Testing in Jubail, KSA

Posted by: Chemist Posted on: September 16, 2026

Enquiry:

Please find below the list of water sampling analysis parameters with methods for your review.

We kindly requesting your support in providing a quotation with reasonable pricing, with other terms & condition.

I would like to thanks and appreciate it if you could respond at your earliest convenience.

Thank you for your assistance, and we look forward to your reply.

S #ParametersUSEPA MethodReagent
1Hydrogen Chloride (HCl)USEPA 26/26A0.1N H2SO4
2Hydrogen Fluoride (HF)
3Ammonia (NH3)SCAQMD 207.1
4Metals (As, Ag, Ba, Be, Cd, Cr, Co, Cu, Pb, Mn, Ni, Hg, Tl, V, Sb)USEPA 295% HNO3 / 10% H2O2
4% KMnO4 /10% H2SO4
5Hydrogen Sulphide (H2S)USEPA 113% H2O2
CdSO4
6Sulfuric Acid Mist (including SO3)USEPA 880% isopropanol
7Formaldehyde (HCHO)USEPA 316DI Water

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Lubricant Oil Testing as per SASO and GSO Specs in India

Posted by: Chemist Posted on: September 15, 2026

Enquiry:

We need testing of our Lubricant oil as per given testing standards , Kindly share quotes for the same.

GSO 1180:2021
SASO GSO ISO 4925:2024
GSO 1180:2021

SASO GSO 1785-2:2024 — Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline and Diesel Engines. This has been adopted as a mandatory Saudi standard.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].