Saudi Arabia
Enquiry:
We are interested to test the diesel fuel oil for the Sulphur content in your labs. please check and confirm the possibility and provide us the cost for the same.
One of our ISO certified laboratory in Saudi Arabia would be taking over this job.
Enquiry:
Hello, I am based in Riyadh. I would need a full test on a water sample (compositions, any potentially dangerous chemicals). Would it be possible to have a quotation and have an estimate of how long would it take?
One of our capable laboratory would be taking over this water testing job.
Enquiry:
Pls. send the quote for Water sample Test for the Hydro testing following are the requirement to be checked . Request you to send your quotation and the time to provide the test certificate.
| Description | Results | Limits Max. | Limits Min. | Spec Limits |
| Appearance (See Note 1) | Clear | Clear | Clear | |
| Free from suspended matter (See Note 1) | Free from suspended matter (See Note 1) | Free from suspended matter (See Note 1) | ||
| ph Value (See Note 2) | None required | None required | None required | |
| SRB Count per ml (See Note 3) | 1000 | 0 | 0-103 | |
| Chloride Ion Concentration (Cl-), reported as either ppm or mg/l (See Note 4*) | 50* | 0 | Varies for application | |
| Total Dissolved Solids (TDS), ppm (See note 5*) | 500* | N/A | Varies for application | |
| Hydrogen Sulfide, ppm (See Note 6) | 10 ppm* | 0 ppm | See Note 6 relative to Safety Concerns |
One of our highly capable laboratory would be carrying out water testing.
Enquiry:
Kindly let me introduce myself briefly, I am a senior procurement engineer responsible for the a/m package where the project is in hand and we are in the execution phase.
Kindly find attached RFQ document and advise best techno/commercial offer.
One of our highly capable ISO certified lab would be taking over this project.
Enquiry:
May request for your offer for Sea water analysis as per attached reference.
| Table B: Typical Water Analysis Items | ||
| Items | Feed Water | |
| 1. Conductivity (⁰C) | (S/cm) | X(1) |
| 2. Total dissolved solids | (TDS) | X |
| 3. pH | ( ) | X |
| 4. Chloride | (Cl – ) | X(1) |
| 5. Nitrate | (NO3 – ) | X |
| 6. Bicarbonate | (HCO3 – ) | X(1) |
| 6. Carbonate | (CaCO3 – ) | X |
| 7. Sulfate | (SO4 2- ) | X |
| 8. Phosphate | (PO4 3- ) | X |
| 9. Fluoride | (F – ) | X |
| 10. Sodium | (Na + ) | X |
| 11. Potassium | (K + ) | X |
| 12. Ammonium | (NH4 + ) | X |
| 13. Calcium | (Ca 2+ ) | X(1) |
| 14. Magnesium | (Mg 2+ ) | X(1) |
| 15. Strontium | (Sr 2+ ) | X |
| 16. Barium | (Ba 2+ ) | X |
| 17. Iron as ion | (Fe 3+ ) | X |
| 18. Manganese | (Mn 2+ ) | X |
| 19. Silicate | (SiO2 ) | X |
| 20. Silicic acid | (SiO3 – ) | X |
| 21. Boron | (B) | X |
| 21. Bromide | (Br) | X |
| 22. Chemical oxygen demand | COD | X |
| 23. Biological oxygen demand | BOD | X |
| 24. Total organic carbon | TOC | X |
| 25. Carbon Dioxide | (CO2 ) | X |
| 26. Microorganism | (unit/cc) | X |
| 27. Hydrogen Sulfide | (H2S) | X |
| 28. Temperature | ( ⁰C ) | X |
| 29. Phytoplankton | X | |
| 30. Total Suspended Solids | (TSS) | X |
| 31. Dissolved Oxygen | (DO) | X |
| 32. Oil and grase | (FTIR) | X |
| 33. Phenols | X | |
| 34. Petroleum Hydrocarbons | (TPH) | X |
| 35. Total Coliform | X | |
| 36. Turbidity | (NTU) | X |
| 37. SDI15 | X |
One of our highly capable lab with ISO certification would be taking over this job.
Enquiry:
Further reference to the captioned subject, we need to do the following test for the transformer oil before and after oil filling.
1. BDV
2. Water Content
3. DGA
4. Moisture Content
Hence, Kindly request you to provide your best price for the above test as earlier as possible to proceed further.
One of our competent laboratory in KSA would be taking over this project.
Enquiry:
I’m looking for a laboratory that can perform Oil droplet size distribution analysis for a project in Saudi Arabia and I would like to know if you are able to do it?
One of our highly capable and competent lab in Saudi Arabia would be taking over this project.
Enquiry:
Hello, I need services regarding testing of fuel AVGAS 100LL as per ASTM D910 standard. Waiting for response
One of our ISO certified lab in Jubail Saudi Arabia would be taking over this analysis.
Enquiry:
Kindly advise if you can conduct a testing for Pratliperl ( attached data sheet ) as per the below standard:
– ISO 16283-1:2016
– ISO 717
– ASTM C518
One of our ISO certifed lab for Material Testing would be conducting this test proficiently.
Enquiry:
With reference to the subject, we have requirement for conducting water test for 7 water tanks in Aramco project. Please see attached parameters to be tested and sample need to be collected from site.
Kindly provide your best quote and availability, duration to conduct test with full report. Awaiting your offer urgently.
One of our Competent laboratory in Jubail would be taking over this task.