United Arab Emirates
Enquiry:
Kindly advise if you can conduct a testing for Pratliperl ( attached data sheet ) as per the below standard:
– ISO 16283-1:2016
– ISO 717
– ASTM C518
One of our ISO certifed lab for Material Testing would be conducting this test proficiently.
Enquiry:
I would like to have information regarding Oil Analysis facilities available at Accredited Test Labs. At our factory we are using following grades of oil –
1. Hydraulic oil ISO VG 46 (Total azolla zs 46 / Mobil DTE 25 )
2. Lubrication oil ISO VG 100 ( Mobil Vacuoline 525 )
3. Lubrication oil ISO VG 320 ( Mobil Gear 600XP320)
4. Lubrication oil ISO VG 220 ( Total carter XEP 220 )
For the following oil grades , oil sample analysis and condition monitoring is to be done which should include :
1. Particle count (NAS value)
2. Water content in ppm
3. Viscosity
4. Acidity level (TAN)
Kindly send the details of testing facilities available at your company . We are waiting for your reply regarding the same.
One of our highly competent and ISO certified laboratory in Fujairah would be performing OCM as requested.
Enquiry:
Please advise if you can provide a testing for Air Filter Cartilage as per ISO 16890.
Below is a photo of the product for your reference.
One of our certified laboratory in Dubai would be conducting this air filter testing.
Enquiry:
Please send us your best price for Water Tanks Microbiology and Legionella Test.
Waiting for your feedback.
One of our Municipality accredited and ISO certified lab would be taking over this analysis.
Enquiry:
We wish to request a formal quotation from your Laboratory for the relevant testing of the different types of used and Lubricant oil.
We would like to know the chemical particles contained and whether is hazardous or reusable etc.
You may also suggest which industry it may suit to use, please let us know the fee and duration for releasing the result also by reply email.
One of our highly competent and ISO certified lab would be performing oil testing and different kinds of sludge analysis
Enquiry:
Water Analysis for STP and MBR in KSA on a three years contract.
3.6 CONTRACTOR shall conduct required analysis for final produced water
from PS-3 MBR, PS-6 MBR, and PS-10 STP. The required analysis and
their frequencies are shown in the below table. CONTRACTOR shall
conduct the analyses in SAUDI approved labs using the
approved method for each analysis as specified in SAES-A-104:
Required Analysis Frequency
(PS-3 & 6
MBR)
Frequency
(PS-10 STP)
Flow rate Daily N/A
pH Weekly Weekly
Total Suspended Solids (TSS) Weekly Weekly
Total Dissolved Solids (TDS) Weekly N/A
Turbidity Weekly Annually
Biological Oxygen Demand (BOD) Weekly Weekly
Chemical Oxygen Demand (COD) Weekly Weekly
Oil & Grease Annually Annually
Phenols Annually Annually
Aluminum (Al) Annually Annually
Ammonia as Nitrogen Annually Annually
Arsenic (As) Annually Annually
Beryllium (Be) Annually Annually
Boron (B) Annually Annually
Cadmium (Cd) Annually Annually
Chlorine (residual) Weekly Annually
Chromium (total) Annually Annually
Cobalt (Co) Annually Annually
Copper (Cu) Annually Annually
Cyanide (total) Annually Annually
Fluorine (F) Annually Annually
Iron (Fe) Annually Annually
Lead (Pb) Annually Annually
Lithium (Li) Annually Annually
Manganese (Mn) Annually Annually
Mercury (Hg) Annually Annually
Molybdenum (Mo) Annually Annually
Nickel (Ni) Annually Annually
Nitrate (as Nitrogen) Monthly Monthly
Selenium (Se) Annually Annually
Vanadium (V) Annually Annually
Zinc (Zn) Annually Annually
Total Chloroform Weekly Weekly
Intestinal Eggs Weekly N/A
One of our Certified and SAC approved lab in KSA would be bidding for this project.
Enquiry:
Please call us to discuss water testing contract.
One of our DAC/ISO certified lab would be taking over this contract.
Enquiry:
Please send me your quote for water testing.
One of our lab in UAE would be taking over this job.
Enquiry:
We are looking for regular testing of Legionella in water samples,let us know :
One of our competent and ISO certified lab would be performing requested analysis on regular basis as required.
Enquiry:
Dear Team,
Please quote for the following instrument calibration:
| Sn | Instrument Name | Make | ID |
| 1 | Digital Vernier Caliper – 0-150mm | INSIZE | 2607182478 |
| 2 | Outside Micrometer – 0-25mm | INSIZE | 1603181468 |
| 3 | Force Gauge – 0-20Kg | EXTECH | 475044 |
| 4 | Ultrasonic Thickness Gauge | POSITECTOR | 387959 |
| 5 | Digital Vernier Caliper – 0-300mm | INSIZE | 201201272 |
| 6 | Measuring Tape – 3M | – | SHE3022 |
One of our competent calibration engineers team would be carrying out this task.