• Home
  • Author: Chemist

Author: Chemist

Lube Oil Testing in Baluchistan, Pakistan

Posted by: Chemist Posted on: August 28, 2026

Enquiry:

We require lab analysis of lubrication oil sample. Oil Type: SAE-30

You are requested to provide your quotation for the following test:

1. Physical Characteristics

  • Viscosity at 100°C (cSt)
  • Viscosity Index
  • Flash Point (Pass/Fail), °C
  • TBN (ASTM D2896), mg KOH/g

2. Wear Metals

  • Iron (Fe), ppm
  • Chromium (Cr), ppm
  • Tin (Sn), ppm
  • Lead (Pb), ppm
  • Copper (Cu), ppm
  • Nickel (Ni), ppm
  • Aluminium (Al), ppm

3. Contamination

  • Water Content (AquaTest), %
  • Sodium (Na), ppm
  • Silicon (Si), ppm

4. Oil Condition

Overall oil condition assessment.

Kindly provide your best quotation along with applicable testing Santander/methods and expected turnaround time for lab analysis report.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Automobile Filters Testing in UAE

Posted by: Chemist Posted on: August 28, 2026

Enquiry:

We are looking forward to getting tested various automobile filters from an accredited lab in the UAE.  

Some of the products are as follows:

Fuel filters

Oil filters

Fuel-water separators

Cab filters

Engine air filters

Steering Oil filters

FUEL-GAS SEPERATOR

Drying tank filters

ENGINE OIL FILTERs

ENGINE OIL FILTERs

Would you please check and advise if you can handle this job and issue the certification.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Oil Sampling Kit, Vacuum Pump in Qatar

Posted by: Chemist Posted on: August 27, 2026

Enquiry:

We are looking for Oil Sampling Equipment (Vacuum Pump + ISO 4021 Sampling Kits) with the required consumables. The required quantity is one (1) unit.

Kindly submit your best quotation, including detailed specifications and lead time for supply.

Please include the following details in your offer:

  • Technical datasheet/specifications
  • Unit price and total price
  • Delivery lead time
  • Warranty details
  • List of included consumables and accessories
  • Country of origin
  • Validity of quotation

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Chilled Water Testing of Chilled Water Plant in Dubai, UAE

Posted by: Chemist Posted on: August 27, 2026

Enquiry:

Please provide your quotation to undertake the six-monthly water sampling, laboratory testing, and condition assessment of the closed-loop chilled water system in Dubai, UAE.

Please provide fixed rates valid until 31 July 2029, as we intend to establish a long-term arrangement for the required inspection and testing services throughout the contract period. The service shall be carried out on a six-monthly basis throughout the contract period ending 31 July 2029. Suppliers shall provide pricing per visit based on the attached Scope of Work.

RFQ Reference: RFQ- (must be referenced on all quotations and correspondence)

Bid Close: 06 September 2026

Description of Works (The summary below is provided for guidance only. Suppliers shall review the attached Scope of Work in full and ensure their quotation includes all requirements, deliverables, labour, equipment, testing, reporting, and compliance obligations contained therein).

The Contractor shall:

  • Collect representative water samples from the closed-loop chilled water system.
  • Carry out laboratory analysis to assess water quality and overall system condition.
  • Verify and report on:
  • Glycol concentration levels.
  • Corrosion protection effectiveness.
  • Water treatment inhibitor levels.
  • Water quality parameters affecting system performance and asset life.
  • Overall system health and recommendations for corrective actions, if required.
  • Submit a comprehensive test report detailing findings, results, observations, and recommendations.

Standards & Requirements

All works shall be carried out in accordance with:

  • SFG20 Schedule 87-27.
  • Relevant BSRIA guidance and best practice recommendations.
  • Applicable British Standards.
  • Applicable Health, Safety, Environmental, and Quality (HSEQ) requirements.

Deliverables

  • Water sampling and laboratory test results.
  • Condition assessment report.
  • Recommendations for any required water treatment adjustments or remedial actions.

Please include the following in your quotation. Quotations shall be based on the attached Scope of Work in its entirety.

  • Lump-sum cost per six-monthly service visit.
  • Lead time for testing and reporting.
  • Sample report format, including test results, interpretation, trend analysis (where available), system condition assessment, recommended corrective actions, and confirmation of compliance with accepted chilled water treatment parameters.
  • Validity of offer.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Environmental, Asbestos Testing in Peshawar, Pakistan

Posted by: Chemist Posted on: August 27, 2026

Enquiry:

We are Environment and Education Services, a consultancy firm based in Peshawar, providing environmental consulting and social services for projects in Khyber Pakhtunkhwa under the supervision/compliance requirements of the World Bank and Asian Development Bank (ADB). Currently, we are expected to be involved in the rehabilitation of an existing government building for environmental and asbestos testing. As part of the rehabilitation work, some demolition activities will also be carried out. The donor has advised that a short Environmental and Occupational Health & Safety (OHS) assessment be conducted, along with a mitigation plan. As an initial step, we need to determine whether any asbestos-containing materials (ACMs) are present within the building or its components. Based on the laboratory findings, a detailed mitigation plan will subsequently be prepared to ensure the protection of workers and the environment from potential asbestos-related hazards. For this purpose, we will collect samples in accordance with approved SOPs, properly seal and label them, and deliver them to your site office in Peshawar for laboratory analysis.

We kindly request you to provide your quotation for the following:

1.      Laboratory testing/analysis per sample using Polarized Light Microscopy (PLM) or any other appropriate/approved analytical method.

2.      Cost per sample, including sampling and laboratory analysis.

3.      Cost per sample excluding sampling.

Please also mention the applicable turnaround time for the analysis and any other relevant requirements for sample submission. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Organic Content Testing Kids Toothpaste Production in Lebanon

Posted by: Chemist Posted on: August 26, 2026

Enquiry:

kids Toothpaste production

I am interested in producing toothpaste for kids, mainly to be organic and natural. I would like to have the opportunity to get in touch to explain more about my project.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Toothpaste Testing in Beirut, Lebanon

Posted by: Chemist Posted on: August 24, 2026

Enquiry:

I am reaching out to inquire about your services in Beirut Lebanon for cosmetics testing, notably toothpaste ingredients and total fluoride content tests, as per attached. We have 5 variants which will need the test report. 

Please advise cost, timeline and any other necessary requirements to proceed. 

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Stack Emission Measurement, Testing in Dubai, UAE

Posted by: Chemist Posted on: August 24, 2026

Enquiry:

We would like to request your best quotation for stack emission measurement/testing from our spray-painting booth for the purpose of maintaining Environmental Clearance (EC).

Our business activities are Carpentry and Wood Flooring Works, classified under Category C.

The required parameters for the stack measurement are:

  • TSP (Total Suspended Particulates)
  • VOCs (Volatile Organic Compounds)

Kindly provide your best competitive quotation

Please also confirm whether the testing and report will meet the requirements applicable for Environmental Clearance (EC).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

LPG Gas Testing in Batangas, Philippines

Posted by: Chemist Posted on: August 24, 2026

Enquiry:
Our Company is looking for LPG testing centers that caters quality testing of LPG in terms of:

1. Composition (Propane:Butane ratio)

2. Contaminants (Hydrocarbons)

3. Physical Properties

4. Combustion Performance

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].