• Home
  • Archive by category "Calibration Service Enquiries"

Category: Calibration Service Enquiries

Calibration Service Enquiries

Diesel Tank Inspection for Civil Defence in RAK, UAE

Posted by: Chemist Posted on: July 7, 2026

Enquiry:

With reference to the above project details, you are hereby requested to provide quotation for

  • Diesel Tank Inspection & Certification for Civil Defense Approval

Capacity: 8,000 gallons

Scope of Activities

1- Visual Inspection

2- NDT and Welding Record review (USE TANK)

3- Calibration of Instruments review

4-Painting Inspection (DFT gauge to be arrange by cunctator)

5-Internal Cleanliness check

6-Detailed Inspection report issued on approved format

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Third-party Certification Diesel Fuel Tank in Dubai, UAE

Posted by: Chemist Posted on: July 6, 2026

Enquiry:

We are currently progressing with the RG-47 Dubai South Project and require the services of an approved third-party inspection agency to carry out the inspection, testing, and certification of our Diesel Fuel Tank.

Kindly provide us with your proposal and confirm your availability to perform the required inspection and certification.

Please also advise on the following:

  • Scope of inspection and certification services.
  • Documentation required from our side prior to inspection.
  • Applicable standards and authority requirements.
  • Inspection schedule and estimated lead time.
  • Commercial quotation for the service.

Should you require any project details or technical documents to prepare your proposal, kindly let us know and we will provide them accordingly.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Vertical Oil Tanks Calibration in Dammam, KSA

Posted by: Chemist Posted on: July 5, 2026

Enquiry:

I am looking for a professional team to perform tank calibration (strapping) for a client’s facility in the Eastern Province.

Project Scope:

  • Total: 14 vertical oil tanks (10 large + 4 small).
  • Requirement: Prepare accurate Strapping Tables (Height in cm vs. Volume in Liters/Tons).

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Setting up Flowmeter Calibration Lab in Islamabad, Pakistan

Posted by: Chemist Posted on: July 4, 2026 , ,

Enquiry:

We are currently looking to expand our capabilities and are exploring the feasibility of establishing a permanent, in-house flow meter calibration setup at our facility in Islamabad. We are reaching out to see if your company can provide, design, or commission such a calibration system for us.

Initially, the setup must be capable of calibrating the following types of equipment (but not limited to these):

  1. ABB CoriolisMaster (Coriolis Mass Flowmeters)
  2. Emerson Rosemount (Flanged Magnetic Flow Meters)

We are highly interested in exploring collaboration opportunities and working out a viable path forward for this project. To help us evaluate this, please share:

  • System Design & Equipment Options: Your standard solutions or customizable rigs for calibrating Coriolis and Magnetic flow meters.
  • Standards Compliance: The international standards (e.g., ISO/IEC 17025, NIST traceability) your calibration setups conform to.
  • Certification & Accreditation Info: The documentation, certifications, and support you provide to ensure the setup complies with global metrology standards.

We look forward to your insights on how we can collaborate on this project.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Gas Detectors Calibration in Riyadh, KSA

Posted by: Chemist Posted on: June 23, 2026

Enquiry:

We would like to invite your company to participate in our tender, please find the below document containing the tender details and requirements.

Project Objective:
Ensure accurate and reliable detection of ammonia gas (NH₃).
Calibrate the sensors and provide calibration certificate for sensors.
Maintain compliance with safety standards and internal HSS requirements.
Verify alarm functionality and signal integrity.
Reduce risk of undetected ammonia leaks.
Support safe and continuous plant operation.

Definitions of Terms:
NH₃ / R717
Ammonia refrigerant
Gas Detector
SCADA / BMS
Fixed ammonia gas detection device
Supervisory Control& Monitoring System
Calibration
OEM
Adjustment and verification using certified test gas
Original Equipment Manufacturer

Contractor Obligations:
The selected vendor shall:
Be qualified and experienced in calibration of fixed NH₃ gas detectors.
Be capable of calibrating multiple OEM detector types.
Use certified and traceable ammonia calibration gases.
Deploy trained and competent technicians.
Coordinate all activities with Client Engineering, Refrigeration, and teams.
Comply fully with Client PTW, LOTO, and safety procedures.
Submit complete calibration documentation and certificates.

    One of our highly proficient and ISO certified laboratory would be taking over this job.

    Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

    Fuel Storage Tank Calibration in Sharjah, UAE

    Posted by: Chemist Posted on: June 13, 2026

    Enquiry:

    We would like to invite your quotation for the calibration of an existing fuel storage tank located at our site in Sharjah, UAE.

    Tank Details:

    • Tank Type: Fuel Storage Tank

    • Capacity: 16,000 Imperial Gallons

    • Location: Sharjah, UAE

    Scope of Work:

    Site visit and calibration of the fuel storage tank.

    Preparation of tank calibration chart/table indicating volume versus dip level.

    Issuance of calibration certificate and complete calibration report.

    Provision of all equipment, tools, manpower, and consumables required to perform the calibration.

    Submission of soft and hard copies of all calibration documents upon completion.

    Kindly include the following information in your quotation:

    • Calibration methodology to be adopted.

    • Lead time for mobilization and completion.

    • Validity of quotation.

    • Payment terms.

    • Any site requirements or prerequisites from our side.

    One of our highly proficient and ISO certified laboratory would be taking over this job.

    Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].