• Home
  • Archive by category "Oil Analysis"

Heavy Oils Testing in Yanbu Al Sinaiyah, KSA

Enquiry:

I hope this email finds you well. We are looking for a reliable laboratory to conduct testing on heavy oil samples and would like to inquire about your testing services.

Specifically, we require analysis for the following parameters:

Density 

Kinematic Viscosity 

Flash Point

Pour Point

Sulfur Content

Ash Content

Water Content

Mechanical Impurities

Carbon Residue (CCR)

Calorific Value (GCV & NCV)

Metal Content (V, Ni, Fe, Ca, Na, Al, etc.)

Could you please provide us with the following information?

1. A quotation for the above tests.

2. The turnaround time for the analysis.

3. Sample volume requirements.

4. Testing standards you follow (e.g., ISO 8217, ASTM, GB/T, etc.).

5. Any additional details regarding sample shipment and handling. We appreciate your prompt response and look forward to your quotation. Please let us know if you require any further details.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Waste Oil Testing Contract in Jubail, KSA

Enquiry:

We are Sorting & Recycling Company for Environmental Services located at Jubail industrial cit. Looking for waste oil testing service on long term basis. So hereby we invite you to send your company prospective and visit our facility at the earliest.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Fire Resistant Hydraulic, Turbine, Lube Oil Testing in Salalah, Oman

Enquiry:

You are invited to participate in the above RFQ subject. Please acknowledge the receipt of this mail and submit your quotation before or on the due date.

Thanks in anticipation of your immediate response.

Timeline is as below:

1RFQ issue date4.02.2025
2Site visitN/A
3Proposal and offer submission date10.02.2025

Remarks :

Please provide two offers one for technical and one for commercial

Turbine Oil Parameters list
S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point (COC) D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Demulsibility, min D-1401
12 Air release D – 3427
13 RPVOT D – 2272
14 Viscosity Index (VI) D – 2270
15 Particle count ISO-4406
16 Membrane Patch Colorimetry (MPC) D – 7843
17 LSV Antioxidant (%) D – 7590
18 Wear metals & Contaminants D – 5185
——————-

Fire Resistance Hydraulic Oil Parameters list

S.No. Parameter Method
1 Appearance Visual
2 Colour D – 1500
3 Viscosity @40˚C D – 445
4 Acid Number D – 974
5 Water content D-6304
6 Pour Point D – 97
7 Flash point D – 92
8 Rust Test D – 665
9 Copper corrosion @100°C/3h D – 130
10 Foaming Characteristics D – 892
11 Resistivity D-1169
12 Air release D – 3427
13 RPVOT D – 2272
14 Chlorine content ISO 15597
15 Particle count ISO-4406
16 Wear metals & Contaminants D – 5185
17 Density D7042
18 Auto Ignition Temperature E-659
19 Mineral oil content D6971

Notes

  • Any offers or clarification received after the deadline, will NOT be acceptable neither entertained.
  • We at Salalah have the right to split the requirements as needed.
  • Vendor to attach datasheet or catalog of items for evaluation purpose.
  • Vendor to attach represent litter if he is the agent for any manufacture

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Machine Circulating Oil, Gear Oil, Turbine Oil Testing in KSA

Enquiry:

I had made water testing in your company before. We are currently looking to perform laboratory testing on several types of oils used in our operations. Specifically, we are interested in testing the following:

1. Gear Oil

2. Paper Machine Circulating Oil

3. Turbine Oil

The tests we require include:

Kinematic Viscosity

Water Content

Flash Point

Acid Value

Oxidative Stability

Impurity Content

Could you kindly provide a quotation for testing the oils listed above, along with the details of the testing process and the turnaround time?

We look forward to your response and hope to establish a working relationship with your laboratory.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Base Oil Testing in India

Enquiry:

We would like to request your services to conduct a wax content test on our base oil, following the UOP 46 method.

We prefer that the testing be conducted by a NABL-certified laboratory to ensure the highest standards of accuracy and reliability.

Kindly provide us with a quote for this service.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Oil Fluids Testing in Libya

Enquiry:

We are Company for importing laboratory equipment in Libya.

There is a Libyan university that asked us to submit an offer regarding an oil drilling fluids laboratory, a complete, integrated laboratory that lacks nothing. Therefore, I want an offer from you for an oil drilling fluids laboratory.


One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Oil and Gas Testing in Khartoum, Sudan

Enquiry:

My name is ----, Downstream manager at Petroleum research and studies Sudan.
Regarding the subject, first allow me to introduce my company. 
we are research and studies is located at Khartoum, it is a technical arm of the oil and energy in Sudan that provides technical data helping carry out supervisory role, by performing the service of analyzing petroleum and petroleum products samples, conducting research and studies, and also providing consultancy services. Unfortunately, the outbreak of war in our country, Sudan, resulted in lack of these services.
I am particularly writing to you asking about the possibility of analyzing petroleum products samples-gasoil, gasoline fuel oil, LPG, JetA-1 for the attached packaged tests at your labs and issuing a certificate.  If this service is available, I would greatly appreciate your action to provide us with more information about: 
-Your accreditation. 
-Minimum time for the process from receiving samples until reporting results. 
-Services fees.
-your terms and conditions if any.
----------
One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Monthly Oil and Fuel Testing for Vessels in KSA

Enquiry:

I am reaching out to inquire about your company’s capability to provide monthly oil and fuel analysis services for vessel engines.

Following my below email, Please fill in the below table before COB today:

No.RSG QuiresSupplier Response
1Please advise if you have provide similar scope of service in the region if Yes how many customers? 
2What types of analytical instruments and equipment do you have in your laboratory? 
3What quality control measures do you have in place to ensure the accuracy and reliability of your analysis results? 
4How do you handle non-conforming results or customer complaints? 
5What is your company’s turnaround time for fuel and oil analysis? 

Requirements:

Objective

To ensure the operational integrity and efficiency of our fleet by conducting detailed oil and fuel analysis for engines including MTU model CR 2000, CAT C12, and Scania. This analysis aims to monitor the condition of engine oils and fuels, guaranteeing optimal performance and longevity.

Expectations

1. Supplier provides suitable sample bottles and ensures timely collection and transport of samples from RSG site.

2. Conducts comprehensive analysis, including viscosity, TAN, wear metals, water content, cetane index, sulfur content, and water/sediment content, using industry best practices.

3. Delivers detailed reports with actionable insights within 5 business days of sample receipt.

Exclusions

While compliant with the delivery, the Scope of Services does not include:

Exclusions for the Monthly Oil and Fuel Analysis for Vessel Engines: